Analysis of the behavior of ultra high performance concrete at early age

Abstract Ultra high performance concretes (UHPCs) are cementitious composite materials with high level of performance characterized by high compressive strength, high tensile strength and superior durability. These are reached by a low water-to-binder ratio, optimized aggregate size distribution, thermal activation, and fiber reinforcement. In the past couple of decades, more and more UHPCs have been developed and found their ways into practice. Thus, the demand for computational models capable of describing and predicting relevant aging phenomena to assist design and planning is increasing. This paper presents the early age experimental characterization as well as the results of subsequent simulations of a typical UHPC matrix. Performed and simulated tests include unconfined compression, splitting (Brazilian), and three-point-bending tests. The computational framework is constructed by coupling a hygro-thermo-chemical (HTC) theory and a comprehensive mesoscale discrete model with formulated aging functions. The HTC component allows taking into account various types of curing conditions with varying temperature and relative humidity and predicting the level of concrete aging. The mechanical component, the Lattice Discrete Particle Model (LDPM), permits the simulation of the failure behavior of concrete at the length scale of major heterogeneities. The aging functions relate the mesoscale LDPM mechanical properties in terms of aging degree, defined in this work as the ratio between the quasi-static elastic modulus at a certain age and its asymptotic value. The obtained results provide insights into UHPC early age mechanisms yielding a computational model for the analysis of aging UHPC structures.

[1]  A. Hillerborg.  The theoretical basis of a method to determine the fracture energyGF of concrete , 1985 .

[2]  Stavroula J. Pantazopoulou,et al.  MICROSTRUCTURAL ASPECTS OF THE MECHANICAL RESPONSE OF PLAIN CONCRETE , 1995 .

[3]  G. Cusatis,et al.  High-Order Microplane Theory for Quasi-Brittle Materials with Multiple Characteristic Lengths , 2014 .

[4]  Luc Taerwe,et al.  Fracture energy of concrete at early ages , 1997 .

[5]  A. Aguado,et al.  Effect of aging on the fracture characteristics and brittleness of a high-strength concrete , 1998 .

[6]  Jan Cervenka,et al.  Multiscale hydro-thermo-mechanical model for early-age and mature concrete structures , 2014, Adv. Eng. Softw..

[7]  Gianluca Cusatis,et al.  Confinement-Shear Lattice Model for Concrete Damage in Tension and Compression: I. Theory , 2002 .

[8]  Roman Wendner,et al.  Age-Dependent Lattice Discrete Particle Model for Quasi-Static Simulations , 2016 .

[9]  Bernhard Pichler,et al.  Unloading‐Based Stiffness Characterisation of Cement Pastes During the Second, Third and Fourth Day After Production , 2015 .

[10]  Miguel Cervera,et al.  THERMO-CHEMO-MECHANICAL MODEL FOR CONCRETE. I: HYDRATION AND AGING , 1999 .

[11]  Benjamin A. Graybeal,et al.  Ultra-High Performance Concrete: A State-of-the-Art Report for the Bridge Community , 2013 .

[12]  Roman Wendner,et al.  Age-dependent Size Effect and Fracture Characteristics of Ultra High Performance Concrete , 2016, 1608.08786.

[13]  Z. Bažant,et al.  Concrete at High Temperatures: Material Properties and Mathematical Models , 1996 .

[14]  Roman Lackner,et al.  Chemoplastic material model for the simulation of early-age cracking: From the constitutive law to numerical analyses of massive concrete structures , 2004 .

[15]  Automatic Parameter Identification of Discrete Mesoscale Models with Application to the Coarse-Grained Simulation of Reinforced Concrete Structures , 2012 .

[16]  G. Cusatis,et al.  A novel material for in situ construction on Mars: experiments and numerical simulations , 2015, 1512.05461.

[17]  Gianluca Cusatis,et al.  Multiscale computational models for the simulation of concrete materials and structures , 2014 .

[18]  Jin-Keun Kim,et al.  Effect of temperature and aging on the mechanical properties of concrete: Part II. Prediction model , 2002 .

[19]  Olivier Coussy,et al.  Modeling of Thermochemomechanical Couplings of Concrete at Early Ages , 1995 .

[20]  Dale P. Bentz,et al.  Prediction of Adiabatic Temperature Rise in Conventional and High-Performance Concretes Using a 3-D Microstructural Model , 1998 .

[21]  Jin-Keun Kim,et al.  Effect of temperature and aging on the mechanical properties of concrete. Part I. Experimental results , 2002 .

[22]  Benjamin A. Graybeal,et al.  Material Property Characterization of Ultra-High Performance Concrete , 2006 .

[23]  G. Cusatis,et al.  Lattice Discrete Particle Model (LDPM) for failure behavior of concrete. II: Calibration and validation , 2011 .

[24]  Zdenek P. Bazant,et al.  I: Formulation , 2022 .

[25]  Roman Wendner,et al.  Statistical justification of Model B4 for drying and autogenous shrinkage of concrete and comparisons to other models , 2015 .

[26]  G. Cusatis,et al.  Generalized mathematical homogenization of the lattice discrete particle model , 2013 .

[27]  Gianluca Cusatis,et al.  Behavior of Ultra High Performance Concrete at Early Age: Experiments and Simulations , 2015 .

[28]  Z. Bažant,et al.  Spectral Stiffness Microplane Model for Quasibrittle Composite Laminates—Part I: Theory , 2008 .

[29]  Miguel Cervera,et al.  THERMO-CHEMO-MECHANICAL MODEL FOR CONCRETE. II: DAMAGE AND CREEP , 1999 .

[30]  Benjamin A Graybeal,et al.  Finite Element Analysis of Ultra-High Performance Concrete: Modeling Structural Performance of an AASHTO Type II Girder and a 2nd Generation Pi-Girder , 2010 .

[31]  E. Landis,et al.  Discrete modeling of ultra-high-performance concrete with application to projectile penetration , 2014 .

[32]  Gianluca Cusatis,et al.  Hygro-thermo-chemical modeling of high performance concrete. I: Theory , 2009 .

[33]  G. Cusatis,et al.  Solidification–microprestress–microplane (SMM) theory for concrete at early age: Theory, validation and application , 2013 .

[34]  R. Mills,et al.  FACTORS INFLUENCING CESSATION OF HYDRATION IN WATER CURED CEMENT PASTES , 1966 .

[35]  G. Cusatis,et al.  Discontinuous Cell Method (DCM) for Cohesive Fracture Propagation , 2010 .

[36]  Ben Graybeal,et al.  Ultra-High Performance Concrete , 2011 .

[37]  Giovanni Di Luzio,et al.  A symmetric over-nonlocal microplane model M4 for fracture in concrete , 2007 .

[38]  Roman Wendner,et al.  Statistical justification of model B4 for multi-decade concrete creep using laboratory and bridge databases and comparisons to other models , 2015 .

[39]  Jun Zhang,et al.  Interior Relative Humidity of Normal- and High-Strength Concrete at Early Age , 2012 .

[40]  Bernhard A. Schrefler,et al.  A multiphysics model for concrete at early age applied to repairs problems , 2013 .

[41]  Luc Taerwe,et al.  Degree of hydration-based description of mechanical properties of early age concrete , 1996 .

[42]  J.-K. Kim,et al.  Compressive strength development of concrete with different curing time and temperature , 1998 .

[43]  J. J. Brooks,et al.  Effect of silica fume on mechanical properties of high-strength concrete , 2004 .

[44]  P. Freiesleben Hansen,et al.  AUTOGENOUS DEFORMATION AND CHANGE OF THE RELATIVE HUMIDITY IN SILICA FUME-MODIFIED CEMENT PASTE , 1996 .

[45]  Konrad Bergmeister,et al.  Numerically and Experimentally Based Reliability Assessment of a Concrete Bridge Subjected to Chloride-Induced Deterioration , 2013 .

[46]  Gianluca Cusatis,et al.  Hygro-thermo-chemical modeling of high-performance concrete. II: Numerical implementation, calibration, and validation , 2009 .

[47]  Miguel Cervera,et al.  Simulation of Construction of RCC Dams. II: Stress and Damage , 2000 .

[48]  Jin-keun Kim,et al.  Fracture Characteristics of Concrete at Early Ages , 2006 .

[49]  Gianluca Cusatis,et al.  Lattice Discrete Particle Model for Fiber-Reinforced Concrete. I: Theory , 2012 .

[50]  James T. Baylot,et al.  Lattice Discrete Particle Model for Fiber-Reinforced Concrete. II: Tensile Fracture and Multiaxial Loading Behavior , 2012 .

[51]  Miguel Cervera,et al.  Simulation of Construction of RCC Dams. I: Temperature and Aging , 2000 .

[52]  Franz-Josef Ulm,et al.  A multiscale micromechanics-hydration model for the early-age elastic properties of cement-based materials , 2003 .

[53]  Jan Byfors,et al.  Plain concrete at early ages , 1980 .

[54]  R. Chamrova.  Modelling and measurement of elastic properties of hydrating cement paste , 2010 .

[55]  Early-age stress-crack opening relationships for high performance concrete , 2004 .

[56]  Gianluca Cusatis,et al.  CONFINEMENT-SHEAR LATTICE MODEL FOR CONCRETE DAMAGE IN TENSION AND COMPRESSION: II. COMPUTATION AND VALIDATION , 2003 .

[57]  Bernhard A. Schrefler,et al.  Hygro‐thermo‐chemo‐mechanical modelling of concrete at early ages and beyond. Part I: hydration and hygro‐thermal phenomena , 2006 .

[58]  G. Cusatis,et al.  A Hygro-Thermo-Chemo Mechanical Model for the Simulation of Early Age Behavior of Ultra-High-Performance Concrete , 2015 .

[59]  G. Cusatis,et al.  Lattice Discrete Particle Model (LDPM) for failure behavior of concrete. I: Theory , 2011 .

[60]  Alfred Strauss,et al.  Inclined Approach Slab Solution for Jointless Bridges: Performance Assessment of the Soil-Structure Interaction , 2015 .

[61]  Olivier Coussy,et al.  Couplings in early-age concrete: From material modeling to structural design , 1998 .

[62]  Lin Wan,et al.  Experimental and Computational Analysis of the Behavior of Ultra High Performance Concrete, Prestressed Concrete, and Waterless Martian Concrete at Early Age and Beyond , 2015 .

[63]  Bernhard A. Schrefler,et al.  Hygro‐thermo‐chemo‐mechanical modelling of concrete at early ages and beyond. Part II: shrinkage and creep of concrete , 2006 .