Large-strain functional fatigue properties of superelastic metastable β titanium and NiTi alloys: A comparative study

[1]  J. Weaver,et al.  Rotary Bend Fatigue of Nitinol to One Billion Cycles , 2023, Shape Memory and Superelasticity.

[2]  T. Finlayson.  The Contributions by Kazuhiro Otsuka to “Shape Memory and Superelasticity”: A Review , 2023, Shape Memory and Superelasticity.

[3]  R. Banerjee,et al.  Mechanisms underlying enhanced strength-ductility combinations in TRIP/TWIP Ti-12Mo alloy engineered via isothermal omega precipitation , 2022, Acta Materialia.

[4]  H. Sehitoglu,et al.  Functional Fatigue of NiTi Shape Memory Alloy: Effect of Loading Frequency and Source of Residual Strains , 2022, Shape Memory and Superelasticity.

[5]  R. P. Tewari,et al.  Superelastic and Shape memory equi-atomic Nickel-Titanium (Ni-Ti) alloy in Dentistry: A Systematic Review , 2022, Materials Today Communications.

[6]  S. Pilz,et al.  Influence of Isothermal Omega Precipitation Aging on Deformation Mechanisms and Mechanical Properties of a β-type Ti-Nb Alloy , 2022, Journal of Alloys and Compounds.

[7]  Shuanglei Li,et al.  Towards bone-like elastic modulus in Ti Nb Sn alloys with large recovery strain for biomedical applications , 2022, Journal of Alloys and Compounds.

[8]  P. Castany,et al.  Complex multi-step martensitic twinning process during plastic deformation of the superelastic Ti-20Zr-3Mo-3Sn alloy , 2022, Acta Materialia.

[9]  D. Rugg,et al.  On the role of internal stresses on the superelastic behaviour of Ti-24Nb (at.%) , 2022, Acta Materialia.

[10]  Paul L. Briant,et al.  Fatigue, Fracture, and Crack Arrest from Bending Induced Pre-strain in Superelastic Nitinol , 2022, Shape Memory and Superelasticity.

[11]  A. Pelton,et al.  Pre-strain and Mean Strain Effects on the Fatigue Behavior of Superelastic Nitinol Medical Devices , 2022, Shape Memory and Superelasticity.

[12]  S. Nagaraja,et al.  Oxide Layer Formation, Corrosion, and Biocompatibility of Nitinol Cardiovascular Devices , 2022, Shape Memory and Superelasticity.

[13]  Edern Menou,et al.  Origin of {112} < 111 > antitwinning in a Ti-24Nb-4Zr-8Sn superelastic single crystal , 2022, Journal of Materials Science.

[14]  Xinqing Zhao,et al.  Mechanisms of near-linear elastic deformation behavior in a binary metastable β-type Ti Nb alloy with large recoverable strain , 2022, Materials Characterization.

[15]  M. Janovská,et al.  Achieving high strength and low elastic modulus in interstitial biomedical Ti–Nb–Zr–O alloys through compositional optimization , 2022, Materials Science and Engineering: A.

[16]  H. Hosoda,et al.  Investigations of mechanical properties and deformation behaviors of the Cr modified Ti–Au shape memory alloys , 2021, Journal of Alloys and Compounds.

[17]  T. Kosec,et al.  A Critical Appraisal of the Use and Properties of Nickel–Titanium Dental Alloys , 2021, Materials.

[18]  N. G. Jones,et al.  The influence of stress on subsequent superelastic behaviour in Ti2448 (Ti–24Nb–4Zr–8Sn, wt%) , 2021, Materials Science and Engineering: A.

[19]  L. Testarelli,et al.  Role of the Crystallographic Phase of NiTi Rotary Instruments in Determining Their Torsional Resistance during Different Bending Conditions , 2021, Materials.

[20]  S. Ahankari,et al.  Advances in enhancing structural and functional fatigue resistance of superelastic NiTi shape memory alloy: A Review , 2021, Journal of Intelligent Material Systems and Structures.

[21]  P. Castany,et al.  Synthesis and characterization of a new TiZrHfNbTaSn high-entropy alloy exhibiting superelastic behavior , 2021 .

[22]  Ł. Rogal,et al.  Effect of Mo and Ta on the Mechanical and Superelastic Properties of Ti-Nb Alloys Prepared by Mechanical Alloying and Spark Plasma Sintering , 2021, Materials.

[23]  W. Xiao,et al.  The roles of oxygen content on microstructural transformation, mechanical properties and corrosion resistance of Ti-Nb-based biomedical alloys with different β stabilities , 2021 .

[24]  D. Raabe,et al.  Orientation-dependent plastic deformation mechanisms and competition with stress-induced phase transformation in microscale NiTi , 2021 .

[25]  Y. Liu,et al.  Controlled Initiation and Propagation of Stress-Induced Martensitic Transformation in Functionally Graded NiTi , 2021, Journal of Alloys and Compounds.

[26]  L. Campanelli.  A review on the recent advances concerning the fatigue performance of titanium alloys for orthopedic applications , 2020, Journal of Materials Research.

[27]  F. Prima,et al.  In-situ microstructural investigations of the TRIP-to-TWIP evolution in Ti-Mo-Zr alloys as a function of Zr concentration , 2020 .

[28]  P. Castany,et al.  Superelastic Behavior of Biomedical Metallic Alloys , 2020, Metallurgical and Materials Transactions A.

[29]  S. Mantri,et al.  On the heterogeneous nature of deformation in a strain-transformable beta metastable Ti-V-Cr-Al alloy , 2019, Acta Materialia.

[30]  F. Prima,et al.  Design of strain-transformable titanium alloys , 2018, Comptes Rendus Physique.

[31]  Yunzhi Wang,et al.  An origin of functional fatigue of shape memory alloys , 2017 .

[32]  Sylvain Calloch,et al.  Fatigue performance of superelastic NiTi near stress-induced martensitic transformation , 2017 .

[33]  P. Castany,et al.  Design of a novel superelastic Ti-23Hf-3Mo-4Sn biomedical alloy combining low modulus, high strength and large recovery strain , 2016 .

[34]  Shujun Li,et al.  Modified surface morphology of a novel Ti-24Nb-4Zr-7.9Sn titanium alloy via anodic oxidation for enhanced interfacial biocompatibility and osseointegration. , 2016, Colloids and surfaces. B, Biointerfaces.

[35]  C. Tasan,et al.  On the mechanism of {332} twinning in metastable β titanium alloys , 2016 .

[36]  Z. Moumni,et al.  Effects of Lüders-like bands on NiTi fatigue behaviors , 2016 .

[37]  Y. Yang,et al.  Deformation twinning in the full-α″ martensitic Ti–25Ta–20Nb shape memory alloy , 2016 .

[38]  D. Dye,et al.  Effect of precipitation on mechanical properties in the β-Ti alloy Ti-24Nb-4Zr-8Sn , 2016 .

[39]  Lei Wang,et al.  Fatigue characteristics of a biomedical β-type titanium alloy with titanium boride , 2015 .

[40]  F. Gil,et al.  Mechanical and microstructural characterization of new nickel-free low modulus β-type titanium wires during thermomechanical treatments , 2015 .

[41]  K. Bhattacharya,et al.  The Influence of the R-Phase on the Superelastic Behavior of NiTi , 2015, Shape Memory and Superelasticity.

[42]  F. Prima,et al.  In situ synchrotron X-ray diffraction study of the martensitic transformation in superelastic Ti-24Nb-0.5N and Ti-24Nb-0.5O alloys , 2015 .

[43]  Shujun Li,et al.  Characterization of the martensitic transformation in the superelastic Ti-24Nb-4Zr-8Sn alloy by in situ synchrotron X-ray diffraction and dynamic mechanical analysis , 2015 .

[44]  F. Gil,et al.  Low modulus Ti-Nb-Hf alloy for biomedical applications. , 2014, Materials science & engineering. C, Materials for biological applications.

[45]  A. Tuissi,et al.  Fatigue properties of a pseudoelastic NiTi alloy: Strain ratcheting and hysteresis under cyclic tensile loading , 2014 .

[46]  S. Kyriakides,et al.  Localization in NiTi tubes under bending , 2014 .

[47]  F. Prima,et al.  Investigation of early stage deformation mechanisms in a metastable β titanium alloy showing combined twinning-induced plasticity and transformation-induced plasticity effects , 2013 .

[48]  Yang Ren,et al.  Evolution of lattice strain and phase transformation of β III Ti alloy during room temperature cyclic tension , 2013 .

[49]  S. W. Robertson,et al.  Mechanical fatigue and fracture of Nitinol , 2012 .

[50]  H. Hosoda,et al.  Cyclic deformation behavior of a Ti–26 at.% Nb alloy , 2009 .

[51]  Guozheng Kang,et al.  Ratchetting deformation of super-elastic and shape-memory NiTi alloys , 2009 .

[52]  T. Cui,et al.  Fatigue properties of a metastable beta-type titanium alloy with reversible phase transformation. , 2008, Acta biomaterialia.

[53]  Mitsuo Niinomi,et al.  Fatigue characteristics of metallic biomaterials , 2007 .

[54]  光雄 新家,et al.  生体用Ti-29Nb-13Ta-4.6Zr合金の力学的特性に及ぼす時効処理の影響 , 2006 .

[55]  Ziad Moumni,et al.  Fatigue analysis of shape memory alloys: energy approach , 2005 .

[56]  M. Abdel-Karim,et al.  Shakedown of complex structures according to various hardening rules , 2005 .

[57]  M. Philippe,et al.  Influence of the microstructure on the pseudoelasticity of a metastable beta titanium alloy , 2005 .

[58]  C. Somsen,et al.  Investigation of the phase evolution in a super-elastic NiTi shape memory alloy (50.7 at.%Ni) under extensional load with synchrotron radiation , 2004 .

[59]  O. Izumi,et al.  Correlation of tensile properties, deformation modes, and phase stability in commercial β-phase titanium alloys , 1987 .

[60]  John A Feeney,et al.  STRESS-INDUCED TRANSFORMATIONS IN Ti-Mo ALLOYS , 1970 .

[61]  I. O. Wallinder,et al.  Metal bioaccessibility in synthetic body fluids – A way to consider positive and negative alloying effects in hazard assessments , 2021 .

[62]  V. Brailovski,et al.  Functional fatigue behavior of superelastic beta Ti-22Nb-6Zr(at%) alloy for load-bearing biomedical applications. , 2016, Materials science & engineering. C, Materials for biological applications.

[63]  P. Castany,et al.  In Situ Synchrotron X-ray Diffraction of the Martensitic Transformation in Superelastic Ti-27Nb and NiTi Alloys: A Comparative Study , 2015 .

[64]  Mitsuo Niinomi,et al.  Mechanical biocompatibilities of titanium alloys for biomedical applications. , 2008, Journal of the mechanical behavior of biomedical materials.

[65]  N. Church,et al.  The effect of sample size on the microstructure and mechanical properties of Ti2448 (Ti-24Nb-4Zr-8Sn wt%) , 2022, Scripta Materialia.