Cost-optimal insulation thickness in dry and mesothermal climates: Existing models and their improvement

Abstract The establishment of a methodology for the calculation of the cost-optimal insulation thickness of building elements has been a subject of interest for some years. Many studies have been conducted on the ideal insulation thickness and been based on specific assumptions and approaches. The introduction of the Energy Performance of Buildings Directive recast (2010/31/EC) in May 2010, leads to the compulsory implementation of a specific methodology for this purpose by all European Union member states (Article 5, EPBD recast). Therefore, a study on this subject was conducted, to evaluate the results of previous studies and the strengths and weaknesses of the previous methodologies and to determine how the methodologies should be further developed to provide more reliable results. Additionally, a derived model was validated by a parametric study that examined all possible aspects that could potentially affect the end results. The minimum requirements of the insulation thickness for three selected European cities were also compared to the results of the proposed model applied to these cities. The results show that the proposed model provides a better compromise between simplicity and accuracy, leading at the same time to significantly lower U -values and therefore to improved energy efficiency of the buildings.

[1]  Agis M. Papadopoulos,et al.  An assessment tool for the energy, economic and environmental evaluation of thermal insulation solutions , 2009 .

[2]  Kemal Çomaklı,et al.  Optimum insulation thickness of external walls for energy saving , 2003 .

[3]  Teuku Meurah Indra Mahlia,et al.  Cost benefits analysis and emission reductions of optimum thickness and air gaps for selected insulation materials for building walls in Maldives , 2010 .

[4]  M. F. Zedan,et al.  Effect of electricity tariff on the optimum insulation-thickness in building walls as determined by a dynamic heat-transfer model , 2005 .

[5]  Liwei Tian,et al.  A study on optimum insulation thicknesses of external walls in hot summer and cold winter zone of China , 2009 .

[6]  Haji Hassan Masjuki,et al.  CORRELATION BETWEEN THERMAL CONDUCTIVITY AND THE THICKNESS OF SELECTED INSULATION MATERIALS FOR BUILDING WALL , 2007 .

[7]  Theodoros Theodosiou,et al.  Feasibility of energy saving renovation measures in urban buildings. The impact of energy prices and the acceptable pay back time criterion , 2002 .

[8]  Agis M. Papadopoulos,et al.  Energy, economic and environmental performance of heating systems in Greek buildings , 2008 .

[9]  O. Kaynakli,et al.  A study on residential heating energy requirement and optimum insulation thickness , 2008 .

[10]  Liwei Tian,et al.  Optimum insulation thickness of residential roof with respect to solar-air degree-hours in hot summe , 2011 .

[11]  Emin Kahya,et al.  Determination of optimum insulation thicknesses of the external walls and roof (ceiling) for Turkey's different degree-day regions , 2007 .

[12]  Figen Balo,et al.  DETERMINATION OF THE ENERGY SAVINGS AND THE OPTIMUM INSULATION THICKNESS IN THE FOUR DIFFERENT INSULATED EXTERIOR WALLS , 2010 .

[13]  James W. Daniel,et al.  Mathematical Interest Theory , 2006 .

[14]  T. McMahon,et al.  Updated world map of the Köppen-Geiger climate classification , 2007 .

[15]  Konstantinos Papakostas,et al.  Estimation of ambient temperature bin data from monthly average temperatures and solar clearness index. Validation of the methodology in two Greek cities , 2007 .

[16]  Athanasios Tzempelikos,et al.  The effect of reflective coatings on building surface temperatures, indoor environment and energy co , 2011 .

[17]  Mohammed Al-Khawaja,et al.  Determination and selecting the optimum thickness of insulation for buildings in hot countries by accounting for solar radiation , 2004 .

[18]  Agis M. Papadopoulos,et al.  State of the art in thermal insulation materials and aims for future developments , 2005 .

[19]  Y. Çengel.  Introduction to thermodynamics and heat transfer , 1996 .

[20]  Agis M. Papadopoulos,et al.  Developing a new library of materials and structural elements for the simulative evaluation of buildings’ energy performance , 2008 .

[21]  I. Moretti,et al.  Heat exchangers and the performance of heat pumps – Analysis of a heat pump database , 2011 .

[22]  Agis M. Papadopoulos,et al.  Optimisation of thermal protection in residential buildings using the variable base degree-days method , 2005 .

[23]  Naouel Daouas,et al.  Analytical periodic solution for the study of thermal performance and optimum insulation thickness of building walls in Tunisia , 2010 .

[24]  Ilaria Ballarini,et al.  Analysis of the building energy balance to investigate the effect of thermal insulation in summer conditions , 2012 .

[25]  Ö. Altan Dombaycı,et al.  Optimization of insulation thickness for external walls using different energy-sources , 2004 .

[26]  Ali Bolatturk,et al.  Optimum insulation thicknesses for building walls with respect to cooling and heating degree-hours in the warmest zone of Turkey , 2008 .

[27]  Agis M. Papadopoulos,et al.  Application of multicriteria analysis in designing HVAC systems , 2009 .

[28]  Agis M. Papadopoulos,et al.  Integrated evaluation of radiative heating systems for residential buildings , 2011 .

[29]  A. M. Papadopoulos,et al.  On the evaluation of heating, ventilating and air conditioning systems , 2010 .

[30]  Ali Bolatturk,et al.  Determination of optimum insulation thickness for building walls with respect to various fuels and climate zones in Turkey , 2006 .