Electro-osmotic flows inside triangular microchannels

This work presents a numerical investigation of both pure electro-osmotic and combined electro-osmotic/pressure-driven flows inside triangular microchannels. A finite element analysis has been adopted to solve the governing equations for the electric potential and the velocity field, accounting for a finite thickness of the electric double layer. The influence of non-dimensional parameters such as the aspect ratio of the cross-section, the electrokinetic diameter and the ratio of the pressure force to the electric force on the flow behavior has been investigated. Numerical results point out that the velocity field is significantly influenced by the aspect ratio of the cross section and the electrokinetic diameter. More specifically, the aspect ratio plays an important role in determining the maximum volumetric flow rate, while the electrokinetic diameter is crucial to establishing the range of pressures that may be sustained by the electro-osmotic flow. Numerical results are also compared with two correlations available in the literature which enable to assess the volumetric flow rate and the pressure head for microchannels featuring a rectangular, a trapezoidal or an elliptical cross-section.

[1]  Q. Liao,et al.  Numerical investigations of electro-osmotic flows in triangle microchannels , 2008 .

[2]  T. Sørensen,et al.  Electrokinetic effects in charged capillary tubes , 1974 .

[3]  C. L. Rice,et al.  Electrokinetic Flow in a Narrow Cylindrical Capillary , 1965 .

[4]  Prashanta Dutta,et al.  Experiment and simulation of mixed flows in a trapezoidal microchannel , 2007 .

[5]  Dongqing Li,et al.  Flow characteristics of water through a microchannel between two parallel plates with electrokinetic effects , 1997 .

[6]  Chun Yang,et al.  ANALYSIS OF ELECTROKINETIC EFFECTS ON THE LIQUID FLOW IN RECTANGULAR MICROCHANNELS , 1998 .

[7]  Dongqing Li,et al.  Electroosmotic flow in microchannels with arbitrary geometry and arbitrary distribution of wall charge. , 2005, Journal of colloid and interface science.

[8]  D. Burgreen,et al.  Electrokinetic Flow in Ultrafine Capillary Slits1 , 1964 .

[9]  C. Kao,et al.  Electrokinetic flow through an elliptical microchannel: effects of aspect ratio and electrical boundary conditions. , 2002, Journal of colloid and interface science.

[10]  Juan G. Santiago,et al.  A planar electroosmotic micropump , 2002 .

[11]  Dongqing Li,et al.  ELECTRICAL DOUBLE LAYER POTENTIAL DISTRIBUTION IN A RECTANGULAR MICROCHANNEL , 1998 .

[12]  Dongqing Li,et al.  Modeling forced liquid convection in rectangular microchannels with electrokinetic effects , 1998 .

[13]  Dongqing Li,et al.  Liquid transport in rectangular microchannels by electroosmotic pumping , 2000 .

[14]  G. Morini,et al.  Electro-osmotic heat transfer in elliptical microchannels under H1 boundary condition , 2013 .

[15]  Chun Yang,et al.  Analysis of electroosmotic flow of power-law fluids in a slit microchannel. , 2008, Journal of colloid and interface science.

[16]  Yang,et al.  Electrokinetic Effects on Pressure-Driven Liquid Flows in Rectangular Microchannels , 1997, Journal of colloid and interface science.

[17]  A. Beskok,et al.  Analytical solution of time periodic electroosmotic flows: analogies to Stokes' second problem. , 2001, Analytical chemistry.

[18]  S. Chakraborty,et al.  Semi-analytical solutions for electroosmotic flows with interfacial slip in microchannels of complex cross-sectional shapes , 2011 .

[19]  M. Renksizbulut,et al.  Pressure-driven electrokinetic slip-flow in planar microchannels , 2010 .

[20]  M. Lorenzini,et al.  Effects of the channel geometry and of the fluid composition on the performances of DC electro-osmotic pumps , 2012 .

[21]  Dongqing Li,et al.  Heat Transfer and Fluid Flow in Microchannels , 1996, Microelectromechanical Systems (MEMS).