Characterization of anodic SiO2 films on P-type 4H-SiC

Abstract The physical and electronic properties of 100–120-nm thick anodic silicon dioxide film grown on p-type 4H-SiC wafer and annealed at different temperatures (500, 600, 700, and 800 °C) have been investigated and reported. Chemical bonding of the films has been analyzed by Fourier transform infra red spectroscopy. Smooth and defect-free film surface has been revealed under field emission scanning electron microscope. Atomic force microscope has been used to study topography and surface roughness of the films. Electronic properties of the film have been investigated by high frequency capacitance–voltage and current–voltage measurements. As the annealing temperature increased, refractive index, dielectric constant, film density, SiC surface roughness, effective oxide charge, and leakage current density have been reduced until 700 °C. An increment of these parameters has been observed after this temperature. However, a reversed trend has been demonstrated in porosity of the film and barrier height between conduction band edge of SiO 2 and SiC.

[1]  F. Namavar,et al.  Photoluminescence from thin porous films of silicon carbide , 1997 .

[2]  W. J. Choyke,et al.  Silicon carbide : recent major advances , 2004 .

[3]  G. Restelli,et al.  Anodic oxidation of silicon carbide , 1974 .

[4]  J Rappich,et al.  Smoothing, passivation and re-passivation of silicon surfaces by anodic oxidation: a low thermal budget process , 2000 .

[5]  R. Paily,et al.  Improvement in electrical characteristics of ultrathin thermally grown SiO2 by selective anodic oxidation , 2002, IEEE Electron Device Letters.

[6]  H. Zirath,et al.  High field-effect mobility in n-channel Si face 4H-SiC MOSFETs with gate oxide grown on aluminum ion-implanted material , 2005, IEEE Electron Device Letters.

[7]  Sima Dimitrijev,et al.  Advances in SiC power MOSFET technology , 2003, Microelectron. Reliab..

[8]  H. Kahn,et al.  Anodic oxidation during MEMS processing of silicon and polysilicon: native oxides can be thicker than you think , 2005, Journal of Microelectromechanical Systems.

[9]  D. Schroder.  Semiconductor Material and Device Characterization , 1990 .

[10]  U. Gösele,et al.  Microstructure and photoluminescence of electrochemically etched porous SiC , 1997 .

[11]  M. Al-Kuhaili.  Optical properties of hafnium oxide thin films and their application in energy-efficient windows , 2004 .

[12]  H. B. Harrison,et al.  Electrical and physical characterization of gate oxides on 4H-SiC grown in diluted N2O , 2003 .

[13]  R. Jones,et al.  Ro-vibrational modes of H2 in 4H-SiC and 2H-GaN , 2003 .

[14]  Kuan Yew Cheong,et al.  Effects of Initial Nitridation on the Characteristics of SiC-SiO2 Interfaces , 2003 .

[15]  R. Helbig,et al.  Electronic transitions of the phosphorus-donor in 4H- and 6H-silicon carbide investigated by FTIR-transmission spectroscopy , 2002 .

[16]  H. B. Harrison,et al.  SIMS analysis of nitrided oxides grown on 4H-SiC , 1999 .