Semi-supervised vibration-based classification and condition monitoring of compressors

Semi-supervised vibration-based classification and condition monitoring of the reciprocating compressors installed in refrigeration appliances is proposed in this paper. The method addresses the problem of industrial condition monitoring where prior class definitions are often not available or difficult to obtain from local experts. The proposed method combines feature extraction, principal component analysis, and statistical analysis for the extraction of initial class representatives, and compares the capability of various classification methods, including discriminant analysis (DA), neural networks (NN), support vector machines (SVM), and extreme learning machines (ELM). The use of the method is demonstrated on a case study which was based on industrially acquired vibration measurements of reciprocating compressors during the production of refrigeration appliances. The paper presents a comparative qualitative analysis of the applied classifiers, confirming the good performance of several nonlinear classifiers. If the model parameters are properly selected, then very good classification performance can be obtained from NN trained by Bayesian regularization, SVM and ELM classifiers. The method can be effectively applied for the industrial condition monitoring of compressors.

[1]  Edvard Govekar,et al.  Automatic Detection of Spring Faults During Assembly of Reciprocating Compressors , 2009 .

[2]  Igor Grabec,et al.  Psychoacoustic Approach to Machine Fault Diagnosis , 2005 .

[3]  Chee Kheong Siew,et al.  Extreme learning machine: Theory and applications , 2006, Neurocomputing.

[4]  Guang-Bin Huang,et al.  Trends in extreme learning machines: A review , 2015, Neural Networks.

[5]  Chuanhou Gao,et al.  A comparative analysis of support vector machines and extreme learning machines , 2012, Neural Networks.

[6]  Ashish Ghosh,et al.  Semi-supervised change detection using modified self-organizing feature map neural network , 2014, Appl. Soft Comput..

[7]  Youlin Shang,et al.  Semi-supervised outlier detection based on fuzzy rough C-means clustering , 2010, Math. Comput. Simul..

[8]  Guang-Bin Huang,et al.  Convex incremental extreme learning machine , 2007, Neurocomputing.

[9]  David J. C. MacKay,et al.  Bayesian Interpolation , 1992, Neural Computation.

[10]  Ali Soleimani,et al.  Early fault detection of rotating machinery through chaotic vibration feature extraction of experimental data sets , 2015 .

[11]  Andrew Ball,et al.  Numerical simulation and experimental study of a two-stage reciprocating compressor for condition monitoring , 2008 .

[12]  Wojtek J. Krzanowski,et al.  Principles of multivariate analysis : a user's perspective. oxford , 1988 .

[13]  Richard A. Johnson,et al.  Applied Multivariate Statistical Analysis , 1983 .

[14]  Xin Zhou,et al.  Deep neural networks: A promising tool for fault characteristic mining and intelligent diagnosis of rotating machinery with massive data , 2016 .

[15]  Shifei Ding,et al.  Extreme learning machine and its applications , 2013, Neural Computing and Applications.

[16]  Robert B. Randall,et al.  Vibration-based Condition Monitoring: Industrial, Aerospace and Automotive Applications , 2011 .

[17]  I. Jolliffe.  Principal Component Analysis , 2002 .

[18]  T. Cacoullos,et al.  Discriminant analysis and applications , 1974 .

[19]  Mohammad Bagher Menhaj,et al.  Training feedforward networks with the Marquardt algorithm , 1994, IEEE Trans. Neural Networks.

[20]  Jian Hou,et al.  Recent advances on SVM based fault diagnosis and process monitoring in complicated industrial processes , 2016, Neurocomputing.

[21]  Andreas Schütze,et al.  Identification and Quantification of Hydraulic System Faults Based on Multivariate Statistics Using Spectral Vibration Features , 2015 .

[22]  Guofeng Wang,et al.  Vibration sensor based tool condition monitoring using ν support vector machine and locality preserving projection , 2014 .

[23]  Simon Haykin,et al.  Neural Networks and Learning Machines , 2010 .

[24]  Yi Cao,et al.  Combination of process and vibration data for improved condition monitoring of industrial systems working under variable operating conditions , 2016 .

[25]  Naim Baydar,et al.  A comparative study of acoustic and vibration signals in detection of gear failures using Wigner-Ville distribution. , 2001 .

[26]  Corinna Cortes,et al.  Support-Vector Networks , 1995, Machine Learning.

[27]  Govekar,et al.  Analysis of acoustic emission signals and monitoring of machining processes , 2000, Ultrasonics.

[28]  Yuefei Wang,et al.  Fault diagnosis of reciprocating compressor valve with the method integrating acoustic emission signal and simulated valve motion , 2015 .

[29]  Xiaogang Wang,et al.  Fault detection and classification for complex processes using semi-supervised learning algorithm , 2015 .

[30]  Edwin Lughofer,et al.  Fault detection in reciprocating compressor valves under varying load conditions , 2016 .

[31]  Bo-Suk Yang,et al.  Condition classification of small reciprocating compressor for refrigeration using artificial neural networks and support vector machines , 2005 .

[32]  B. Kannapiran,et al.  Fault detection and diagnosis of pneumatic valve using Adaptive Neuro-Fuzzy Inference System approach , 2014, Appl. Soft Comput..

[33]  K. I. Ramachandran,et al.  Automatic rule learning using decision tree for fuzzy classifier in fault diagnosis of roller bearing , 2007 .

[34]  Vladimir N. Vapnik,et al.  The Nature of Statistical Learning Theory , 2000, Statistics for Engineering and Information Science.

[35]  Dejie Yu,et al.  A gear fault diagnosis using Hilbert spectrum based on MODWPT and a comparison with EMD approach , 2009 .

[36]  Christopher J. C. Burges,et al.  A Tutorial on Support Vector Machines for Pattern Recognition , 1998, Data Mining and Knowledge Discovery.

[37]  Vladimir Vapnik,et al.  Statistical learning theory , 1998 .

[38]  Menderes Kalkat.  Experimentally vibration and noise analysis of two types of washing machines with a proposed neural network predictor , 2014 .

[39]  John Moody,et al.  Fast Learning in Networks of Locally-Tuned Processing Units , 1989, Neural Computation.

[40]  James Hensman,et al.  Natural computing for mechanical systems research: A tutorial overview , 2011 .

[41]  Cristina Castejón,et al.  Crack detection in rotating shafts based on 3 × energy: Analytical and experimental analyses , 2016 .

[42]  Yih-Hwang Lin,et al.  Automated Fault Classification of Reciprocating Compressors from Vibration Data: A Case Study on Optimization Using Genetic Algorithm☆ , 2014 .

[43]  V. Sugumaran,et al.  Fault diagnosis of automobile hydraulic brake system using statistical features and support vector machines , 2015 .

[44]  Xuemei Liu,et al.  Semi-supervised learning and condition fusion for fault diagnosis , 2013 .

[45]  Jing Yuan,et al.  Wavelet transform based on inner product in fault diagnosis of rotating machinery: A review , 2016 .

[46]  Chee Kheong Siew,et al.  Universal Approximation using Incremental Constructive Feedforward Networks with Random Hidden Nodes , 2006, IEEE Transactions on Neural Networks.

[47]  Wei He,et al.  A novel scheme for fault detection of reciprocating compressor valves based on basis pursuit, wave matching and support vector machine , 2012 .

[48]  K. R. Al-Balushi,et al.  Artificial neural networks and support vector machines with genetic algorithm for bearing fault detection , 2003 .

[49]  Krzysztof Patan,et al.  Artificial Neural Networks for the Modelling and Fault Diagnosis of Technical Processes , 2008 .