Processing and Properties of Ultra-Refractory Composites Based on Zr- and Hf-Borides: State of the Art and Perspectives

[1]  Guo‐Jun Zhang,et al.  Pressureless Sintering of Zirconium Diboride Ceramics with Boron Additive , 2012 .

[2]  H. Kleebe,et al.  Transmission electron microscopy on Zr- and Hf-borides with MoSi_2 addition: Densification mechanisms , 2010 .

[3]  Xinghong Zhang,et al.  Densification, microstructure and mechanical properties of ZrB 2SiCw ceramic composites , 2009 .

[4]  C. Carney.  Oxidation resistance of hafnium diboride—silicon carbide from 1400 to 2000 °C , 2009 .

[5]  Guo‐Jun Zhang,et al.  ZrB2–MoSi2 composites toughened by elongated ZrB2 grains via reactive hot pressing , 2009 .

[6]  S. Du,et al.  Effect of sintering temperature and holding time on the microstructure and mechanical properties of ZrB2–SiCw composites , 2009 .

[7]  Jiecai Han,et al.  Fabrication and evaluation on thermal stability of hafnium diboride matrix composite at severe oxidation condition , 2009 .

[8]  Shi-Hai Sun,et al.  Effects of different additives on microstructure and crack resistance for an ultra-high temperature ceramic , 2009 .

[9]  邹冀.  Formation of tough interlocking microstructure in ZrB2-SiC-based ultrahigh-temperature ceramics by pressureless sintering , 2009 .

[10]  张辉.  Properties of ZrB2-SiC Ceramics by Pressureless Sintering , 2009 .

[11]  倪德伟.  Highly textured ZrB2-based ultrahigh temperature ceramics via strong magnetic field alignment , 2009 .

[12]  Antonio Mario Locci,et al.  Consolidation via spark plasma sintering of HfB2/SiC and HfB2/HfC/SiC composite powders obtained by self-propagating high-temperature synthesis , 2009 .

[13]  Y. Sakka,et al.  Textured HfB2-based ultrahigh-temperature ceramics with anisotropic oxidation behavior , 2009 .

[14]  S. Guo,et al.  Densification of ZrB2-based composites and their mechanical and physical properties: A review , 2009 .

[15]  Y. Sakka,et al.  Highly textured ZrB2-based ultrahigh temperature ceramics via strong magnetic field alignment , 2009 .

[16]  Xinghong Zhang,et al.  THERMAL SHOCK BEHAVIOR OF ZrB2-20vol.%SiC-15vol.% GRAPHITE FLAKE BY HOT PRESSING , 2009 .

[17]  Jiecai Han,et al.  Characterization of hot-pressed short carbon fiber reinforced ZrB2–SiC ultra-high temperature ceramic composites , 2009 .

[18]  Jiecai Han,et al.  Processing and characterization of ZrB2–SiCW ultra-high temperature ceramics , 2009 .

[19]  Gang Li,et al.  Effect of AlN as sintering aid on hot-pressed ZrB2–SiC ceramic composite , 2009 .

[20]  Jiecai Han,et al.  Preparation, microstructure and mechanical properties of ZrB2–ZrO2 ceramics , 2009 .

[21]  S. Guo,et al.  Mechanical behavior of two-step hot-pressed ZrB2-based composites with ZrSi2 , 2009 .

[22]  Jiecai Han,et al.  Preparation and Thermal Ablation Behavior of HfB2–SiC-Based Ultra-High-Temperature Ceramics Under Severe Heat Conditions , 2009 .

[23]  F. Monteverde.  The addition of SiC particles into a MoSi2-doped ZrB2 matrix: Effects on densification, microstructure and thermo-physical properties , 2009 .

[24]  S. Guo,et al.  Elastic properties of spark plasma sintered (SPSed) ZrB2–ZrC–SiC composites , 2008 .

[25]  张国军.  Fabrication and Characterization of ZrB2–based ceramic using synthesized ZrB2-LaB6 powder , 2008 .

[26]  William G. Fahrenholtz,et al.  Thermal shock resistance of ZrB2 and ZrB2–30% SiC , 2008 .

[27]  G. Hilmas,et al.  Improved Oxidation Resistance of Zirconium Diboride by Tungsten Carbide Additions , 2008 .

[28]  Jiecai Han,et al.  Processing and mechanical properties of short carbon fibers toughened zirconium diboride-based ceramics , 2008 .

[29]  D. Sciti,et al.  Sintering and Mechanical Properties of ZrB 2 -TaSi 2 and HfB 2 -TaSi 2 Ceramic Composites , 2008 .

[30]  K. Ray,et al.  Mechanical, Thermal and Oxidation Behaviour of Zirconium Diboride Based Ultra-High Temperature Ceramic Composites , 2008 .

[31]  M. Brochu,et al.  Fabrication of UHTCs by Conversion of Dynamically Consolidated Zr+B and Hf+B Powder Mixtures , 2008 .

[32]  J. Zou,et al.  Pressureless densification of ZrB2–SiC composites with vanadium carbide , 2008 .

[33]  J. Zou,et al.  Effect of Yb2O3 Addition on Hot‐Pressed ZrB2‐SiC Ceramics , 2008 .

[34]  Guo‐Jun Zhang,et al.  Reactive Hot Pressing of ZrB2–SiC–ZrC Composites at 1600°C , 2008 .

[35]  Guo‐Jun Zhang,et al.  Fabrication and Characterization of ZrB2‐Based Ceramic Using Synthesized ZrB2–LaB6 Powder , 2008 .

[36]  J. Zaykoski,et al.  High‐Temperature Chemistry and Oxidation of ZrB2 Ceramics Containing SiC, Si3N4, Ta5Si3, and TaSi2 , 2008 .

[37]  Jiecai Han,et al.  Mechanical properties of short carbon fiber reinforced ZrB2–SiC ceramic matrix composites , 2008 .

[38]  D. Eifler,et al.  Polyetheretherketone (PEEK) Coatings on Stainless Steel by Electrophoretic Deposition , 2008 .

[39]  M. Nygren,et al.  Densification and Mechanical Behavior of HfC and HfB2 Fabricated by Spark Plasma Sintering , 2008 .

[40]  D. Sciti,et al.  Spark plasma sintering and hot pressing of ZrB2–MoSi2 ultra-high-temperature ceramics , 2008 .

[41]  G. Hilmas,et al.  Pressureless Sintering of ZrB2–SiC Ceramics , 2007 .

[42]  D. Sciti,et al.  High‐Density Pressureless‐Sintered HfC‐Based Composites , 2006 .

[43]  D. Sciti,et al.  Properties of a Pressureless‐Sintered ZrB2–MoSi2 Ceramic Composite , 2006 .

[44]  D. Sciti,et al.  Fabrication and properties of HfB_2–MoSi_2 composites produced by hot pressing and spark plasma sintering , 2006 .

[45]  F. Monteverde.  Beneficial effects of an ultra-fine α-SiC incorporation on the sinterability and mechanical properties of ZrB2 , 2006 .

[46]  D. Sciti,et al.  Long-term oxidation behavior and mechanical strength degradation of a pressurelessly sintered ZrB2–MoSi2 ceramic , 2005 .

[47]  F. Monteverde.  Progress in the fabrication of ultra-high-temperature ceramics: “in situ” synthesis, microstructure and properties of a reactive hot-pressed HfB2–SiC composite , 2005 .

[48]  A. Bellosi,et al.  Development and characterization of metal-diboride-based composites toughened with ultra-fine SiC particulates , 2005 .

[49]  A. Bellosi,et al.  The resistance to oxidation of an HfB2–SiC composite , 2005 .

[50]  A. Bellosi,et al.  Development and characterization of metal-diboride-based composites toughened with ultra-fine SiC particulates , 2005 .

[51]  D. Sciti,et al.  Oxidation behavior of a pressureless sintered ZrB_2–MoSi_2 ceramic composite , 2005 .

[52]  V. Medri,et al.  Comparison of ZrB2‐ZrC‐SiC Composites Fabricated by Spark Plasma Sintering and Hot‐Pressing , 2005 .

[53]  Guo‐Jun Zhang,et al.  Reactive Hot Pressing of ZrB2–SiC Composites , 2004 .

[54]  A. Bellosi,et al.  Efficacy of HfN as sintering aid in the manufacture of ultrahigh-temperature metal diborides-matrix ceramics , 2004 .

[55]  J. Zaykoski,et al.  Oxidation-based materials selection for 2000°C + hypersonic aerosurfaces: Theoretical considerations and historical experience , 2004 .

[56]  Anubhav Jain,et al.  Carbothermal reduction synthesis of nanocrystalline zirconium carbide and hafnium carbide powders using solution-derived precursors , 2004 .

[57]  Q. Nguyen,et al.  Oxidation of Ultrahigh Temperature Ceramics in Water Vapor , 2004 .

[58]  D. Van Wie,et al.  The hypersonic environment: Required operating conditions and design challenges , 2004 .

[59]  Donald T. Ellerby,et al.  Processing, properties and arc jet oxidation of hafnium diboride/silicon carbide ultra high temperature ceramics , 2004 .

[60]  K. W. Dudeck,et al.  Polymeric precursors to refractory metal borides , 2004 .

[61]  A. Sayir.  Carbon fiber reinforced hafnium carbide composite , 2004 .

[62]  Yigal D. Blum,et al.  Chemical reactivities of hafnium and its derived boride, carbide and nitride compounds at relatively mild temperature , 2004 .

[63]  L. Sneddon,et al.  Precursor routes to Group 4 metal borides, and metal boride/carbide and metal boride/nitride composites , 2004 .

[64]  E. Opila,et al.  Oxidation of ZrB2- and HfB2-based ultra-high temperature ceramics: Effect of Ta additions , 2004 .

[65]  Bridget R. Rogers,et al.  Catalytic Atom Recombination on ZrB2/SiC and HfB2/SiC Ultrahigh-Temperature Ceramic Composites , 2004 .

[66]  Donald T. Ellerby,et al.  High‐Strength Zirconium Diboride‐Based Ceramics , 2004 .

[67]  Alida Bellosi,et al.  Microstructure and Properties of an HfB2‐SiC Composite for Ultra High Temperature Applications , 2004 .

[68]  Alida Bellosi,et al.  Oxidation of ZrB2-Based Ceramics in Dry Air , 2003 .

[69]  A. Bellosi,et al.  Beneficial Effects of AlN as Sintering Aid on Microstructure and Mechanical Properties of Hot‐pressed ZrB2 , 2003 .

[70]  M. Johnsson,et al.  TiN/Al2O3 composites and graded laminates thereof consolidated by spark plasma sintering , 2003 .

[71]  F. Boey,et al.  Thermal conductivity and dielectric constant of spark plasma sintered aluminum nitride , 2003 .

[72]  A. Bellosi,et al.  Advances in microstructure and mechanical properties of zirconium diboride based ceramics , 2003 .

[73]  Alida Bellosi,et al.  Processing and properties of zirconium diboride-based composites , 2002 .

[74]  K. Shim,et al.  Crystallographic orientation of ZrB2‐ZrC composites manufactured by the spark plasma sintering method , 2002, Journal of microscopy.

[75]  Alida Bellosi,et al.  Effect of the addition of silicon nitride on sintering behaviour and microstructure of zirconium diboride , 2002 .

[76]  R. Schmid-Fetzer,et al.  Interface reactions between SiC/Zr and development of zirconium base composites by in-situ solid state reactions , 2001 .

[77]  A. Goldstein,et al.  Boron Carbide–Zirconium Boride In Situ Composites by the Reactive Pressureless Sintering of Boron Carbide–Zirconia Mixtures , 2001 .

[78]  Mark M. Opeka,et al.  Mechanical, Thermal, and Oxidation Properties of Refractory Hafnium and zirconium Compounds , 1999 .

[79]  M. Tokita.  Development of Large-Size Ceramic/Metal Bulk FGM Fabricated by Spark Plasma Sintering , 1999 .

[80]  D. Perera,et al.  Comparative study of fabrication of Si3N4/SiC composites by spark plasma sintering and hot isostatic pressing , 1998 .

[81]  B. Yen.  X-ray diffraction study of mechanochemical synthesis and formation mechanisms of zirconium carbide and zirconium silicides , 1998 .

[82]  김종희,et al.  철계 액상을 통한 붕화지르코늄의 소결 , 1996 .

[83]  A. N. Jette,et al.  Oxidation mechanisms of hafnium carbide and hafnium diboride in the temperature range 1400 to 2100 C , 1993 .

[84]  R. Mcpherson,et al.  Fabrication of new zirconium boride ceramics , 1989 .

[85]  R. Bradt,et al.  Mechanical properties of ZrC-ZrB2 and ZrC-TiB2 directionally solidified eutectics , 1986 .

[86]  H. H. Davis,et al.  Effect of an SiC addition on the oxidation of ZrB , 1973 .

[87]  Antonio Mario Locci,et al.  Corrigendum to Consolidation via spark plasma sintering of HfB2/SiC and HfB2/HfC/SiC composite powders obtained by self-propagating high-temperature synthesis [J. Alloys Compd. 478 (2009) 572-578] , 2011 .

[88]  Guo‐Jun Zhang,et al.  Effect of holding time and pressure on properties of ZrB2–SiC composite fabricated by the spark plasma sintering reactive synthesis method , 2009 .

[89]  Jiecai Han,et al.  Microstructure and properties of silicon carbide whisker reinforced zirconium diboride ultra-high temperature ceramics , 2009 .

[90]  Guo‐Jun Zhang,et al.  Reaction Processes and Characterization of ZrB2 Powder Prepared by Boro/Carbothermal Reduction of ZrO2 in Vacuum , 2009 .

[91]  M. Nygren,et al.  Spark plasma sintering of Zr-and Hf-borides with decreasing amounts of MoSi2 as sintering aid , 2008 .

[92]  Raffaele Savino,et al.  Arc-jet testing on HfB2 and HfC-based ultra-high temperature ceramic materials , 2008 .

[93]  R. Savino,et al.  Stability of ultra-high-temperature ZrB2–SiC ceramics under simulated atmospheric re-entry conditions , 2007 .

[94]  D. Sciti,et al.  Fast Densification of Ultra‐High‐Temperature Ceramics by Spark Plasma Sintering , 2006 .

[95]  M. Nygren,et al.  Novel assemblies via spark plasma sintering , 2004 .

[96]  Yang Xia,et al.  Phase evolution and microstructure characteristics of ultrafine Ti(C, N)-based cermet by spark plasma sintering , 2004 .

[97]  K. Shim,et al.  The effect of lanthanum on the fabrication of ZrB2–ZrC composites by spark plasma sintering , 2003 .

[98]  Jonathan A. Salem,et al.  Evaluation of ultra-high temperature ceramics foraeropropulsion use , 2002 .

[99]  G. S. Upadhyaya.  Thermal Shock Resistance , 1998 .

[100]  Rolf E. Hummel,et al.  Alloys and Compounds , 1998 .

[101]  K. Upadhya,et al.  Materials for ultrahigh temperature structural applications , 1997 .

[102]  H. Pastor.  Metallic Borides: Preparation of Solid Bodies — Sintering Methods and Properties of Solid Bodies , 1977 .

[103]  Vlado I. Matkovich,et al.  Boron and Refractory Borides , 1977 .