D3LP00019B 1..9 ++

Bio-based vitrimers represent a promising class of thermosetting polymer materials, pairing the recyclability of dynamic covalent networks with the renewability of non-fossil fuel feedstocks. Vanillin, a lowcost lignin derivative, enables facile construction of polyimine networks marked by rapid exchange and sensitivity to acid-catalyzed hydrolysis. Furthermore, the aromatic structure makes it a promising candidate for the design of highly aromatic networks capable of high-performance thermal and dimensional stability. Such properties are paramount in polymeric thermal protection systems. Here, we report on the fabrication of polyimine networks with particularly high aromatic content from a novel trifunctional vanillin monomer prepared from the nucleophilic aromatic substitution of perfluoropyridine (PFP) on a multigram scale (>20 g) in high yield (86%). The trifunctional aromatic scaffold was then crosslinked with various diamines to demonstrate tunable viscoelastic behavior and thermal properties, with glass transition temperatures (Tg) ranging from 9 to 147 °C, degradation temperatures (5% mass loss) up to approximately 370 °C, and excellent char yields up to 68% at 650 °C under nitrogen. Moreover, the vitrimers displayed mechanical reprocessability over five destruction/healing cycles and rapid chemical recyclability following acidic hydrolysis at mild temperatures. Our findings indicate that vitrimers possessing tunable properties and high-performance thermomechanical behavior can be easily constructed from vanillin and electrophilic aromatic scaffolds for applications in heat-shielding materials and ablative coatings.

[1]  K. A. Stewart,et al.  Dynamic Ablative Networks: Shapeable Heat-Shielding Materials. , 2023, ACS applied materials & interfaces.

[2]  Chadron M. Friesen,et al.  Shaken Not Stirred: Perfluoropyridine-Polyalkylether Prepolymers , 2022, Macromolecules.

[3]  M. Urban,et al.  Combined Reprocessability and Self-Healing in Fluorinated Acrylic-Based Covalent Adaptable Networks (CANs) , 2022, ACS Applied Polymer Materials.

[4]  K. A. Stewart,et al.  Controlling Dynamics of Associative Networks through Primary Chain Length , 2022, Macromolecules.

[5]  B. Sumerlin,et al.  Janus Cross-links in Supramolecular Networks. , 2022, Journal of the American Chemical Society.

[6]  Xinyue Zhang,et al.  Fully Bio-Based High-Performance Thermosets with Closed-Loop Recyclability , 2022, ACS Sustainable Chemistry & Engineering.

[7]  L. Avérous,et al.  Biobased vitrimers: towards sustainable and adaptable performing polymer materials , 2022, Progress in Polymer Science.

[8]  Jiang Li,et al.  Effects of inorganic nanofibers and high char yield fillers on char layer structure and ablation resistance of ethylene propylene diene monomer composites , 2021, Composites Part A: Applied Science and Manufacturing.

[9]  R. Sijbesma,et al.  Reversible crosslinking and fast stress relaxation in dynamic polymer networks via transalkylation using 1,4-diazabicyclo[2.2.2] octane , 2021, Polymer Chemistry.

[10]  Loren C. Brown,et al.  Toward Taming the Chemical Reversibility of Perfluoropyridine through Molecular Design with Applications to Pre- and Postmodifiable Polymer Architectures , 2021 .

[11]  F. D. Du Prez,et al.  Covalent Adaptable Networks Using β-Amino Esters as Thermally Reversible Building Blocks. , 2021, Journal of the American Chemical Society.

[12]  Jonathan M. Millican,et al.  Plastic Pollution: A Material Problem? , 2021, Macromolecules.

[13]  Maarten M. J. Smulders,et al.  The effect of polarity on the molecular exchange dynamics in imine-based covalent adaptable networks , 2021, Polymer Chemistry.

[14]  L. Ceseracciu,et al.  Biobased, Biodegradable, Self-Healing Boronic Ester Vitrimers from Epoxidized Soybean Oil Acrylate , 2020, ACS Applied Polymer Materials.

[15]  Ren Liu,et al.  Synthesis of Vanillin-Based Polyimine Vitrimers with Excellent Reprocessability, Fast Chemical Degradability, and Adhesion , 2020 .

[16]  K. A. Stewart,et al.  Pyridine-functionalized linear and network step-growth fluoropolymers , 2020 .

[17]  B. Harvey,et al.  Synthesis and Characterization of High-Performance, Bio-Based Epoxy–Amine Networks Derived from Resveratrol , 2020 .

[18]  William R. Dichtel,et al.  Reprocessable Cross-Linked Polymer Networks: Are Associative Exchange Mechanisms Desirable? , 2020, ACS central science.

[19]  Yinghua Jin,et al.  Robust, high-barrier, and fully recyclable cellulose-based plastic replacement enabled by a dynamic imine polymer , 2020 .

[20]  Xinli Jing,et al.  Recyclable, Self-healable, and Highly Malleable Poly(urethane-urea)s with improved Thermal and Mechanical Performances. , 2020, ACS applied materials & interfaces.

[21]  Yangju Lin,et al.  Renewable castor oil and DL-limonene derived fully bio-based vinylogous urethane vitrimers , 2020 .

[22]  Q. Fang,et al.  Sustainable alternative to bisphenol A epoxy resin: high-performance recyclable epoxy vitrimers derived from protocatechuic acid , 2020 .

[23]  B. Sumerlin,et al.  Polystyrene-Based Vitrimers: Inexpensive and Recyclable Thermosets , 2020 .

[24]  R. Lambeth,et al.  Exploiting the Site Selectivity of Perfluoropyridine for Facile Access to Densified Polyarylene Networks for Carbon-Rich Materials. , 2020, ACS macro letters.

[25]  K. A. Stewart,et al.  Perfluoropyridine as a Scaffold for Semifluorinated Thiol‐ene Networks with Readily Tunable Thermal Properties , 2020, Macromolecular Chemistry and Physics.

[26]  Hao‐Bin Zhang,et al.  Fully Biobased Vitrimers from Glycyrrhizic Acid and Soybean Oil for Self-Healing, Shape Memory, Weldable, and Recyclable Materials , 2020 .

[27]  William R. Dichtel,et al.  Incorporating Functionalized Cellulose to Increase the Toughness of Covalent Adaptable Networks. , 2020, ACS applied materials & interfaces.

[28]  C. M. Bates,et al.  Dynamic Bottlebrush Polymer Networks: Self-Healing in Super-Soft Materials. , 2020, Journal of the American Chemical Society.

[29]  Q. Fang,et al.  Gel–Sol Transition of Vanillin-Based Polyimine Vitrimers: Imparting Vitrimers with Extra Welding and Self-Healing Abilities , 2020 .

[30]  U. Ojha,et al.  Catalyst-Free Partially Bio-Based Polyester Vitrimers , 2020 .

[31]  Xinxin Yang,et al.  A fully bio-based epoxy vitrimer: Self-healing, triple-shape memory and reprocessing triggered by dynamic covalent bond exchange , 2020 .

[32]  Y. Qiu,et al.  Vanillin-Based Epoxy Vitrimer with High Performance and Closed-Loop Recyclability , 2020 .

[33]  Thomas H. Epps,et al.  Block Copolymer Vitrimers. , 2019, Journal of the American Chemical Society.

[34]  L. Leibler,et al.  Dynamic covalent chemistry in polymer networks: a mechanistic perspective , 2019, Polymer Chemistry.

[35]  B. Sumerlin,et al.  Adaptable Crosslinks in Polymeric Materials: Resolving the Intersection of Thermoplastics and Thermosets. , 2019, Journal of the American Chemical Society.

[36]  Y. Ni,et al.  Vitrimer-Cellulose Paper Composites: A New Class of Strong, Smart, Green and Sustainable Materials. , 2019, ACS applied materials & interfaces.

[37]  Yinghua Jin,et al.  Rapid Fabrication of Malleable Fiber Reinforced Composites with Vitrimer Powder , 2019, ACS Applied Polymer Materials.

[38]  L. Avérous,et al.  A fully bio-based polyimine vitrimer derived from fructose , 2019, Green Chemistry.

[39]  Shusen You,et al.  Facile in situ preparation of high-performance epoxy vitrimer from renewable resources and its application in nondestructive recyclable carbon fiber composite , 2019, Green Chemistry.

[40]  B. Sumerlin,et al.  Catalyst-Free Vitrimers from Vinyl Polymers , 2019, Macromolecules.

[41]  Weilin Xu,et al.  Vanillin-Based Polyschiff Vitrimers: Reprocessability and Chemical Recyclability , 2018, ACS Sustainable Chemistry & Engineering.

[42]  J. Kalow,et al.  Vitrimeric Silicone Elastomers Enabled by Dynamic Meldrum's Acid-Derived Cross-Links. , 2018, ACS macro letters.

[43]  Tuan Liu,et al.  Eugenol-Derived Biobased Epoxy: Shape Memory, Repairing, and Recyclability , 2017 .

[44]  Yinghua Jin,et al.  Tuning the physical properties of malleable and recyclable polyimine thermosets: the effect of solvent and monomer concentration , 2017 .

[45]  A. Chauhan,et al.  Modular and rapid access to amphiphilic homopolymers via successive chemoselective post-polymerization modification , 2017 .

[46]  S. Rowan,et al.  Effect of Sterics and Degree of Cross-Linking on the Mechanical Properties of Dynamic Poly(alkylurea–urethane) Networks , 2017 .

[47]  J. Kenny,et al.  Science and technology of polymeric ablative materials for thermal protection systems and propulsion devices: A review , 2016 .

[48]  B. Sumerlin,et al.  Multifunctional Homopolymers: Postpolymerization Modification via Sequential Nucleophilic Aromatic Substitution , 2016 .

[49]  B. Sumerlin,et al.  Efficient and Chemoselective Synthesis of ω,ω-Heterodifunctional Polymers. , 2015, ACS macro letters.

[50]  Ludwik Leibler,et al.  Chemically crosslinked yet reprocessable epoxidized natural rubber via thermo-activated disulfide rearrangements , 2015 .

[51]  Wei Zhang,et al.  Heat‐ or Water‐Driven Malleability in a Highly Recyclable Covalent Network Polymer , 2014, Advanced materials.

[52]  S. Mohanty,et al.  Recent developments in elastomeric heat shielding materials for solid rocket motor casing application for future perspective , 2018 .

[53]  Z. Guan,et al.  Olefin metathesis for effective polymer healing via dynamic exchange of strong carbon-carbon double bonds. , 2012, Journal of the American Chemical Society.

[54]  J. Kenny,et al.  Ablative properties of carbon black and MWNT/phenolic composites: A comparative study , 2012 .