Transient pressure measurements at part load operating condition of a high head model Francis turbine

Hydraulic turbines are operating at part load conditions depending on availability of hydraulic energy or to meet the grid requirements. The turbine experiences more fatigue during the part load operating conditions due to flow phenomena such as vortex breakdown in the draft tube and flow instability in the runner. The present paper focuses on the investigation of a high head model Francis turbine operating at 50% load. Pressure measurements have been carried out experimentally on a model Francis turbine. Total six pressure sensors were mounted inside the turbine and other two pressure sensors were mounted at the turbine inlet pipe. It is observed that the turbine experiences significant pressure fluctuations at the vaneless space and the runner. Moreover, a standing wave is observed between the pressure tank outlet and the turbine inlet. Analysis of the data acquired by the pressure sensors mounted in the draft tube showed the presence of vortex breakdown co-rotating with the runner. The detailed analysis showed the rotating and plunging components of the vortex breakdown. The influence of the rotating component was observed in the entire hydraulic circuit including distributor and turbine inlet but not the plunging one.

[1]  F. Avellan,et al.  Experimental Study and Numerical Simulation of the Flindt Draft Tube Rotating Vortex , 2007 .

[2]  Christophe Nicolet,et al.  Hydroacoustic modelling and numerical simulation of unsteady operation of hydroelectric systems , 2007 .

[3]  Mohamed Farhat,et al.  Pump-Turbine Rotor-Stator Interactions in Generating Mode: Pressure Fluctuation in Distributor Channel , 2006 .

[4]  C Deschênes,et al.  Experimental and Numerical Analysis of the Cavitating Part Load Vortex Dynamics of Low-Head Hydraulic Turbines , 2011 .

[5]  Wang Zhengwei,et al.  Experimental and numerical analysis of blade channel vortices in a Francis turbine runner , 2011 .

[6]  François Avellan,et al.  Experimental Evidence of Rotating Stall in a Pump-Turbine at Off-Design Conditions in Generating Mode , 2011 .

[7]  Mirjam Sick,et al.  Thirty years of numerical flow simulation in hydraulic turbomachines , 2008 .

[8]  Meng Joo Er,et al.  New Trends in Technologies: Devices, Computer, Communication and Industrial Systems , 2010 .

[9]  Ole Gunnar Dahlhaug,et al.  Experimental and Numerical Studies for a High Head Francis Turbine at Several Operating Points , 2013 .

[10]  Consultant,et al.  IEC 60041 - 1991, "FIELD ACCEPTANCE TESTS TO DETERMINE THE HYDRAULIC PERFORMANCE OF HYDRAULIC TURBINES, STORAGE PUMPS AND PUMP-TURBINES". CLAUSE 14 "THERMODYNAMIC METHOD FOR MEASURING EFFICIENCY" COMMENTS , 2010 .

[11]  M J Cervantes,et al.  Turbine-99 unsteady simulations - Validation , 2010 .

[12]  Alin Bosioc,et al.  Unsteady Pressure Analysis of a Swirling Flow With Vortex Rope and Axial Water Injection in a Discharge Cone , 2012 .

[13]  Øyvind Antonsen,et al.  Unsteady flow in wicket gate and runner with focus on static and dynamic load on runner , 2007 .

[14]  F. Avellan,et al.  Experimental Evidence of Hydroacoustic Pressure Waves in a Francis Turbine Elbow Draft Tube for Low Discharge Conditions , 2009 .

[15]  Christophe Nicolet,et al.  Methodology for Risk Assessment of Part Load Resonance in Francis Turbine Power Plant , 2006 .

[16]  Thomas Staubli,et al.  Instability of Pump-Turbines during Start-up in Turbine Mode , 2008 .