Fabrication of scalable and structured tissue engineering scaffolds using water dissolvable sacrificial 3D printed moulds.
暂无分享,去创建一个
Layla Bashir Larsen | Jenny Emnéus | Peter Szabo | Anders Wolff | Chiara Canali | Soumyaranjan Mohanty | Jon Trifol | Harsha Vardhan Reddy Burri | Marin Dufva | A. Wolff | J. Emnéus | Soumyaranjan Mohanty | J. Trifol | P. Szabó | H. R. Burri | M. Dufva | C. Canali | L. Larsen
[1] J. Lewis,et al. Chaotic mixing in three-dimensional microvascular networks fabricated by direct-write assembly , 2003, Nature materials.
[2] Rui L Reis,et al. Three-dimensional plotted scaffolds with controlled pore size gradients: Effect of scaffold geometry on mechanical performance and cell seeding efficiency. , 2011, Acta biomaterialia.
[3] V. Dixit,et al. The bioartificial liver: state-of-the-art. , 2003, The European journal of surgery. Supplement. : = Acta chirurgica. Supplement.
[4] J. Lewis,et al. Fugitive Inks for Direct‐Write Assembly of Three‐Dimensional Microvascular Networks , 2005 .
[5] Henrique A Almeida,et al. Design of tissue engineering scaffolds based on hyperbolic surfaces: structural numerical evaluation. , 2014, Medical engineering & physics.
[6] Michael Sorkin,et al. Strategies for organ level tissue engineering , 2010, Organogenesis.
[7] Maryam Tabrizian,et al. Sensing surfaces : Challenges in studying the cell adhesion process and the cell adhesion forces on biomaterials , 2008 .
[8] S. Hollister. Porous scaffold design for tissue engineering , 2005, Nature materials.
[9] David Beebe,et al. Engineers are from PDMS-land, Biologists are from Polystyrenia. , 2012, Lab on a chip.
[10] Ali Khademhosseini,et al. Progress in tissue engineering. , 2009, Scientific American.
[11] Ali Khademhosseini,et al. Fabrication and characterization of tough elastomeric fibrous scaffolds for tissue engineering applications , 2010, 2010 Annual International Conference of the IEEE Engineering in Medicine and Biology.
[12] GeunHyung Kim,et al. Cell-laden poly(ɛ-caprolactone)/alginate hybrid scaffolds fabricated by an aerosol cross-linking process for obtaining homogeneous cell distribution: fabrication, seeding efficiency, and cell proliferation and distribution. , 2013, Tissue engineering. Part C, Methods.
[13] Nupura S. Bhise,et al. Direct-write bioprinting of cell-laden methacrylated gelatin hydrogels , 2014, Biofabrication.
[14] F. Guilak,et al. Advanced Material Strategies for Tissue Engineering Scaffolds , 2009, Advanced materials.
[15] Yuhui Li,et al. Techniques for fabrication and construction of three-dimensional scaffolds for tissue engineering , 2013, International journal of nanomedicine.
[16] Hyoungshin Park,et al. Combined technologies for microfabricating elastomeric cardiac tissue engineering scaffolds. , 2010, Macromolecular bioscience.
[17] Joe Tien,et al. Fabrication of microfluidic hydrogels using molded gelatin as a sacrificial element. , 2007, Lab on a chip.
[18] A. Khademhosseini,et al. Microscale technologies for tissue engineering and biology. , 2006, Proceedings of the National Academy of Sciences of the United States of America.
[19] C J Murphy,et al. Effects of synthetic micro- and nano-structured surfaces on cell behavior. , 1999, Biomaterials.
[20] Ali Khademhosseini,et al. Micro- and Nanoengineering Approaches to Control Stem Cell-Biomaterial Interactions , 2011, Journal of functional biomaterials.
[21] Brendon M. Baker,et al. Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues , 2012 .
[22] Ali Khademhosseini,et al. Microfabrication of complex porous tissue engineering scaffolds using 3D projection stereolithography. , 2012, Biomaterials.
[23] K. Leong,et al. Fabrication of controlled release biodegradable foams by phase separation. , 1995, Tissue engineering.
[24] Ravi Dhurjati,et al. Influence of substratum surface chemistry/energy and topography on the human fetal osteoblastic cell line hFOB 1.19: Phenotypic and genotypic responses observed in vitro. , 2007, Biomaterials.
[25] L. Griffith,et al. Capturing complex 3D tissue physiology in vitro , 2006, Nature Reviews Molecular Cell Biology.
[26] Zhongmin Jin,et al. Layer-by-layer micromolding of natural biopolymer scaffolds with intrinsic microfluidic networks , 2013, Biofabrication.
[27] Brian Derby,et al. Printing and Prototyping of Tissues and Scaffolds , 2012, Science.
[28] Martin Dufva,et al. Poly(Dimethylsiloxane) (PDMS) Affects Gene Expression in PC12 Cells Differentiating into Neuronal-Like Cells , 2013, PloS one.
[29] Robert Langer,et al. Perspectives and Challenges in Tissue Engineering and Regenerative Medicine , 2009, Advanced materials.
[30] Hyoungshin Park,et al. The significance of pore microarchitecture in a multi-layered elastomeric scaffold for contractile cardiac muscle constructs. , 2011, Biomaterials.
[31] S. Hollister. Scaffold Design and Manufacturing: From Concept to Clinic , 2009, Advanced materials.
[32] Margam Chandrasekaran,et al. Rapid prototyping in tissue engineering: challenges and potential. , 2004, Trends in biotechnology.
[33] P. Janmey,et al. Effects of substrate stiffness on cell morphology, cytoskeletal structure, and adhesion. , 2005, Cell motility and the cytoskeleton.
[34] Yan Zhou,et al. Fabrication of three-dimensional poly(ε-caprolactone) scaffolds with hierarchical pore structures for tissue engineering. , 2013, Materials science & engineering. C, Materials for biological applications.
[35] R Langer,et al. Novel approach to fabricate porous sponges of poly(D,L-lactic-co-glycolic acid) without the use of organic solvents. , 1996, Biomaterials.
[36] Peter Dubruel,et al. The role of scaffold architecture and composition on the bone formation by adipose-derived stem cells. , 2014, Tissue engineering. Part A.
[37] J. Vacanti,et al. Tissue Engineering and Organ Structure: A Vascularized Approach to Liver and Lung , 2008, Pediatric Research.
[38] K. Fischer,et al. Scalable Units for Building Cardiac Tissue , 2014, Advanced materials.
[39] L. Gibson,et al. The effect of pore size on cell adhesion in collagen-GAG scaffolds. , 2005, Biomaterials.
[40] Sang Ho Cho,et al. Fabrication and characterization of hydrophilic poly(lactic-co-glycolic acid)/poly(vinyl alcohol) blend cell scaffolds by melt-molding particulate-leaching method. , 2003, Biomaterials.
[41] D. G. T. Strange,et al. Extracellular-matrix tethering regulates stem-cell fate. , 2012, Nature materials.
[42] Jin Gao,et al. Macroporous elastomeric scaffolds with extensive micropores for soft tissue engineering. , 2006, Tissue engineering.
[43] Antonios G Mikos,et al. Fabrication of nonwoven coaxial fiber meshes by electrospinning. , 2009, Tissue engineering. Part C, Methods.
[44] Liping Tang,et al. Method to analyze three-dimensional cell distribution and infiltration in degradable scaffolds. , 2008, Tissue engineering. Part C, Methods.
[45] Hyoungshin Park,et al. 3D Structural Patterns in Scalable, Elastomeric Scaffolds Guide Engineered Tissue Architecture , 2013, Advanced materials.
[46] Scott J Hollister,et al. Mechanical and biochemical assessments of three-dimensional poly(1,8-octanediol-co-citrate) scaffold pore shape and permeability effects on in vitro chondrogenesis using primary chondrocytes. , 2010, Tissue engineering. Part A.