An efficient and locking‐free material point method for three‐dimensional analysis with simplex elements

[1]  William M. Coombs,et al.  An implicit high-order material point method. , 2017 .

[2]  M. Ortiz,et al.  Formulation of implicit finite element methods for multiplicative finite deformation plasticity , 1990 .

[3]  William M. Coombs,et al.  Overcoming volumetric locking in material point methods , 2018 .

[4]  James P. Ferry,et al.  An efficient and robust particle-localization algorithm for unstructured grids , 2007, J. Comput. Phys..

[5]  Francisco Armero,et al.  On the formulation of enhanced strain finite elements in finite deformations , 1997 .

[6]  Pedro Arduino,et al.  Mitigating kinematic locking in the material point method , 2012, J. Comput. Phys..

[7]  Q. Tran,et al.  Temporal and null‐space filter for the material point method , 2019, International Journal for Numerical Methods in Engineering.

[8]  Martin Berzins,et al.  Improving accuracy in the MPM method using a null space filter , 2017, CPM 2017.

[9]  Martin Berzins,et al.  Computational simulation of penetrating trauma in biological soft tissues using the material point method. , 2005, Studies in health technology and informatics.

[10]  S. Cescotto,et al.  A finite element approach for large strains of nearly incompressible rubber-like materials , 1979 .

[11]  Peter Wriggers,et al.  A note on enhanced strain methods for large deformations , 1996 .

[12]  D. Owen,et al.  Design of simple low order finite elements for large strain analysis of nearly incompressible solids , 1996 .

[13]  William M. Coombs,et al.  Modelling Screwpile Installation Using the MPM , 2017 .

[14]  D. Sulsky,et al.  A particle method for history-dependent materials , 1993 .

[15]  Jin-qian Yu.  Symmetric gaussian quadrature formulae for tetrahedronal regions , 1984 .

[16]  Xia Ma,et al.  Material point method enhanced by modified gradient of shape function , 2011, J. Comput. Phys..

[17]  Martin Berzins,et al.  Simulation of soft tissue failure using the material point method. , 2006, Journal of biomechanical engineering.

[18]  E. A. S. Neto,et al.  F‐bar‐based linear triangles and tetrahedra for finite strain analysis of nearly incompressible solids. Part I: formulation and benchmarking , 2005 .

[19]  Lars Vabbersgaard Andersen,et al.  Modelling of landslides with the material-point method , 2008 .

[20]  R. Hauptmann,et al.  On volumetric locking of low‐order solid and solid‐shell elements for finite elastoviscoplastic deformations and selective reduced integration , 2000 .

[21]  XinMing Qiu,et al.  v-p material point method for weakly compressible problems , 2018, Computers & Fluids.

[22]  Michael A. Hicks,et al.  Development of an implicit material point method for geotechnical applications , 2016 .

[23]  A. Sadeghirad,et al.  A convected particle domain interpolation technique to extend applicability of the material point method for problems involving massive deformations , 2011 .

[24]  William M. Coombs,et al.  iGIMP: An implicit generalised interpolation material point method for large deformations , 2017 .

[25]  William M. Coombs,et al.  AMPLE: A Material Point Learning Environment , 2020, Adv. Eng. Softw..

[26]  Yanping Lian,et al.  Simulation of high explosive explosion using adaptive material point method , 2009 .

[27]  M. V. Kreveld.  Computational Geometry , 2000, Springer Berlin Heidelberg.

[28]  William M. Coombs,et al.  Imposition of essential boundary conditions in the material point method , 2018 .

[29]  En-Jui Lee.  Elastic-Plastic Deformation at Finite Strains , 1969 .

[30]  J. C. Simo,et al.  Geometrically non‐linear enhanced strain mixed methods and the method of incompatible modes , 1992 .

[31]  J. Brackbill,et al.  FLIP: A method for adaptively zoned, particle-in-cell calculations of fluid flows in two dimensions , 1986 .

[32]  Matthias Möller,et al.  A High Order Material Point Method , 2017 .

[33]  Xiong Zhang,et al.  Material Point Method for Impact and Explosion Problems , 2007 .

[34]  William M. Coombs,et al.  On the use of domain-based material point methods for problems involving large distortion , 2019, Computer Methods in Applied Mechanics and Engineering.

[35]  Pieter A. Vermeer,et al.  Two-phase Material Point Method applied to the study of cone penetration , 2016 .

[36]  P. A. Cundall,et al.  Mixed discretization procedure for accurate modelling of plastic collapse , 1982 .

[37]  Peter Wriggers,et al.  Consistent gradient formulation for a stable enhanced strain method for large deformations , 1996 .

[38]  Song Lin,et al.  Numerical simulation of explosive welding using the material point method , 2011 .

[39]  P. Keast.  Moderate-degree tetrahedral quadrature formulas , 1986 .

[40]  Alexey Stomakhin,et al.  A material point method for snow simulation , 2013, ACM Trans. Graph..

[41]  Vinh Phu Nguyen,et al.  On a family of convected particle domain interpolations in the material point method , 2017 .

[42]  J. C. Rice,et al.  On numerically accurate finite element solutions in the fully plastic range , 1990 .

[43]  Pieter A. Vermeer,et al.  Two‐phase dynamic analysis by material point method , 2013 .

[44]  Gordon G. D. Zhou,et al.  Three-dimensional material point method modeling of runout behavior of the Hongshiyan landslide , 2019, Canadian Geotechnical Journal.

[45]  Rebecca M. Brannon,et al.  Second‐order convected particle domain interpolation (CPDI2) with enrichment for weak discontinuities at material interfaces , 2013 .

[46]  S. Bardenhagen,et al.  The Generalized Interpolation Material Point Method , 2004 .

[47]  William M. Coombs,et al.  On Lagrangian mechanics and the implicit material point method for large deformation elasto-plasticity , 2020, Computer Methods in Applied Mechanics and Engineering.

[48]  D. Sulsky.  Erratum: Application of a particle-in-cell method to solid mechanics , 1995 .

[49]  William M. Coombs,et al.  B-spline based boundary conditions in the material point method , 2019, Computers & Structures.

[50]  Ming Gong,et al.  Improving the Material Point Method , 2016 .