Quasi-static and dynamic strain sensing using carbon nanotube/epoxy nanocomposite thin films

Thin films are developed by dispersing carbon black nanoparticles and carbon nanotubes (CNTs) in an epoxy polymer. The films show a large variation in electrical resistance when subjected to quasi-static and dynamic mechanical loading. This phenomenon is attributed to the change in the band-gap of the CNTs due to the applied strain, and also to the change in the volume fraction of the constituent phases in the percolation network. Under quasi-static loading, the films show a nonlinear response. This nonlinearity in the response of the films is primarily attributed to the pre-yield softening of the epoxy polymer. The electrical resistance of the films is found to be strongly dependent on the magnitude and frequency of the applied dynamic strain, induced by a piezoelectric substrate. Interestingly, the resistance variation is found to be a linear function of frequency and dynamic strain. Samples with a small concentration of just 0.57% of CNT show a sensitivity as high as 2.5% MPa-1 for static mechanical loading. A mathematical model based on Bruggeman's effective medium theory is developed to better understand the experimental results. Dynamic mechanical loading experiments reveal a sensitivity as high as 0.007% Hz(-1) at a constant small-amplitude vibration and up to 0.13%/mu-strain at 0-500 Hz vibration. Potential applications of such thin films include highly sensitive strain sensors, accelerometers, artificial neural networks, artificial skin and polymer electronics.

[1]  Reshef Tenne,et al.  Stress-induced fragmentation of multiwall carbon nanotubes in a polymer matrix , 1998 .

[2]  Lou,et al.  Carbon atomic chains in strong electric fields. , 1996, Physical review. B, Condensed matter.

[3]  Chuck Zhang,et al.  Processing and modeling of conductive thermoplastic/carbon nanotube films for strain sensing , 2008 .

[4]  Q. Xue,et al.  The interface effect of the effective electrical conductivity of carbon nanotube composites , 2007 .

[5]  Y. Li,et al.  Ultra-high sensitivity of super carbon-nanotube-based mass and strain sensors. , 2008, Nanotechnology.

[6]  S. Paulson,et al.  In situ resistance measurements of strained carbon nanotubes , 1999, cond-mat/9905304.

[7]  David Hui,et al.  The revolutionary creation of new advanced materials - Carbon nanotube composites , 2002 .

[8]  M. Boyce,et al.  A constitutive model for the nonlinear viscoelastic viscoplastic behavior of glassy polymers , 1995 .

[9]  N. Kotov,et al.  Multifunctional layer-by-layer carbon nanotube–polyelectrolyte thin films for strain and corrosion sensing , 2007 .

[10]  Effective conductivity of composites containing spheroidal inclusions: Comparison of simulations with theory , 1993 .

[11]  Rolf Landauer,et al.  The Electrical Resistance of Binary Metallic Mixtures , 1952 .

[12]  Satish Nagarajaiah,et al.  Nanotube film based on single-wall carbon nanotubes for strain sensing , 2004 .

[13]  Fpt Frank Baaijens,et al.  Micromechanical modeling of the elasto-viscoplastic behavior of semi-crystalline polymers , 2003 .

[14]  Markus Brink,et al.  Tuning carbon nanotube band gaps with strain. , 2003, Physical review letters.

[15]  Moussa Nait-Abdelaziz,et al.  Elasto-viscoplastic constitutive equations for the description of glassy polymers behavior at constant strain rate , 2007 .

[16]  D. Stroud.  Generalized effective-medium approach to the conductivity of an inhomogeneous material , 1975 .

[17]  Mark J. Schulz,et al.  A carbon nanotube strain sensor for structural health monitoring , 2006 .

[18]  G. Shan,et al.  The effect of deformations on electronic structures and optical properties of carbon nanotubes , 2006 .

[19]  M. Boyce,et al.  Large inelastic deformation of glassy polymers. part I: rate dependent constitutive model , 1988 .

[20]  Rudolf Zeller,et al.  Elastic Constants of Polycrystals , 1973 .

[21]  Myounggu Park,et al.  Strain-dependent electrical resistance of multi-walled carbon nanotube/polymer composite films , 2008, Nanotechnology.

[22]  D. A. G. Bruggeman.  Berechnung verschiedener physikalischer Konstanten von heterogenen Substanzen. I. Dielektrizitätskonstanten und Leitfähigkeiten der Mischkörper aus isotropen Substanzen , 1935 .

[23]  Guili Yu,et al.  The effect of uniaxial and torsional deformations on quantum interference of carbon nanotubes , 2006 .

[24]  Rajinder Pal,et al.  New models for effective Young's modulus of particulate composites , 2005 .

[25]  M. P. Anantram,et al.  Band-gap change of carbon nanotubes: Effect of small uniaxial and torsional strain , 1999 .