An improved stopband and sharp roll off microstrip low pass filter with defected ground structures

In this paper a novel low pass filter (LPF) design procedure is proposed for electromagnetic bandgap based microstrip filters without using classical filter design approach. LPF is designed for ultra-wide stopband and sharp roll-off rate via proposed design procedure. It has been shown that finite periodic fan-shaped defected ground structures (FSDGSs) and double radial stubs (DRSs) yield broad stopband and very sharp transition band. The proposed LPF has −3 dB passband from dc to 1.49 GHz, and −20 dB broad stopband from 1.65 GHz up to 7.41 GHz. Full wave electromagnetic (EM) simulation of the proposed filter is achieved with ANSYS's High Frequency Structure Simulator (HFSS) and equivalent circuit (EC) model of the filter is proposed and verified via Applied Wave Research (AWR) software. To verify the simulations, filter is realized on ARLON AD1000 substrate, and measured with Agilent 5245A PNA-X Vector Network Analyzer. Measurement results of fabricated filter are in good agreement with EM and EC simulations.

[1]  Noyan Kinayman,et al.  Modern Microwave Circuits , 2005 .

[2]  Yeong-Her Wang,et al.  A novel cross-shape DGS applied to design ultra-wide stopband low-pass filters , 2006 .

[3]  Agah Oktay Ertay,et al.  A compact low pass filter design with a fan-shaped defected ground structure for broad stopband , 2013, 2013 8th International Conference on Electrical and Electronics Engineering (ELECO).

[4]  Jae-Bong Lim,et al.  A novel 1-D periodic defected ground structure for planar circuits , 2000 .

[5]  M. Kufa Comparison of Planar Fractal Filters on Defected Ground Substrate , 2012 .

[6]  Ahmed Boutejdar,et al.  Method for widening the reject-band in low-pass/band-pass filters by employing coupled C-shaped defected ground structure , 2008 .

[7]  T. Itoh,et al.  A Novel Wideband Common-Mode Suppression Filter for Gigahertz Differential Signals Using Coupled Patterned Ground Structure , 2009, IEEE Transactions on Microwave Theory and Techniques.

[8]  K. Srivastava,et al.  A via-free left-handed Transmission Line with Radial Stubs , 2009, 2009 Asia Pacific Microwave Conference.

[9]  Wen-Hua Tu,et al.  Compact microstrip low-pass filter with sharp rejection , 2005, IEEE Microwave and Wireless Components Letters.

[10]  Jia-Sheng Hong,et al.  Microstrip filters for RF/microwave applications , 2001 .

[11]  Mau-Phon Houng,et al.  A novel cross-shape DGS applied to design ultra-wide stopband low-pass filters , 2006, IEEE Microwave and Wireless Components Letters.

[12]  Kartikeyan V. Machavaram,et al.  Microstrip filter with defected ground structure: a close perspective , 2013, International Journal of Microwave and Wireless Technologies.

[13]  Tatsuo Itoh,et al.  A uniplanar compact photonic-bandgap (UC-PBG) structure and its applications for microwave circuit , 1999 .

[14]  Sangwook Nam,et al.  Design of a Novel Harmonic-Suppressed Microstrip Low-Pass Filter , 2007, IEEE Microwave and Wireless Components Letters.

[15]  R. Kaul,et al.  Microwave engineering , 1989, IEEE Potentials.

[16]  Jordi Bonache,et al.  Compact lowpass filters with very sharp transition bands based on open complementary split ring resonators , 2009 .

[17]  Y. Qian,et al.  A design of the low-pass filter using the novel microstrip defected ground structure , 2001 .

[18]  Jiasheng Hong Microstrip Filters for RF/Microwave Applications: Hong/Microstrip Filters 2E , 2011 .

[19]  A. Abdel-Rahman,et al.  Control of bandstop response of Hi-Lo microstrip low-pass filter using slot in ground plane , 2004, IEEE Transactions on Microwave Theory and Techniques.

[20]  Qing Wang,et al.  An Improved Parameters Extraction Method for Dumbbell-Shaped Defected Ground Structure , 2010 .

[21]  A. Boutejdar,et al.  A Compact Microstrip Multi-Layer Lowpass Filter Using Triangle Slots Etched in the Ground Plane , 2006, 2006 European Microwave Conference.

[22]  Xiaowei Sun,et al.  Compact lowpass filter using spiral compact microstrip resonant cells , 2005 .