Development of automatic system for monitoring fishing effort in conger-eel tube fishery using radio frequency identification and global positioning system

In this study, we developed a new automatic system, comprised of a radio frequency identification (RFID) system and global positioning system (GPS), for monitoring fishing effort, and effectiveness of effort, in fisheries using many pieces of fishing gear, such as hooks of longlines. The outline of this system is as follows. A single RFID tag with an identification (ID) number is attached to each piece of fishing gear. The RFID tag on the fishing gear passes the antenna of the RFID reader before being shot into the sea and after being hauled up from the sea. Data on the time and geographic location are measured by the GPS and recorded along with the ID number in a personal computer (PC). When a fish is caught, it is brought close to the fish-sorting table. Then, the second antenna of the RFID reader set at the side checks for a catch in the gear. The advantage of this system is that the fishing operation data can be collected without interfering with the fishermen’s usual work. The prototype of the system was tested at a conger-eel tube fishery in Tokyo Bay and was able to record data on the time, the location and the catch of individual conger-eel tubes successfully.