Design considerations for large-current GTOs

The current crowding of a GTO during turn-off operation and the limits to operating without breakdown were investigated by a newly developed measurement method of current distribution and by computer simulation. Design considerations for large-current GTOs were clarified as follows: to increase the maximum turnoff current, current crowding is suppressed by a gate structure optimized for the distribution of a steady on-state current, and the maximum current flowing into a unit GTO is reduced in a safe operating area by optimizing the number of unit GTOs. The characteristics of a 4000-A GTO trial-fabricated under these design considerations are shown to confirm the validity of the design assumptions. >

[1]  S. Sakurada,et al.  Ultrahigh-voltage high-current gate turn-off thyristors , 1984, IEEE Transactions on Electron Devices.

[2]  Osamu Hashimoto,et al.  Turn-On and Turn-Off Characteristics of a 4.5-kV 3000-A Gate Turn-Off Thyristor , 1986, IEEE Transactions on Industry Applications.

[3]  T. Nagano,et al.  A snubber-less GTO , 1982, 1982 IEEE Power Electronics Specialists conference.

[4]  A. Nakagawa,et al.  A study on GTO turn-off failure mechanism—A time- and temperature-dependent 1-D model analysis , 1984, IEEE Transactions on Electron Devices.

[5]  A.A. Jaecklin,et al.  Gate turn-off thyristors with near perfect technology , 1986, 1986 International Electron Devices Meeting.

[6]  P. D. Taylor,et al.  High-voltage high-current GTO thyristors , 1985 .