A micro powder injection molding apparatus for high aspect ratio metal micro-structure production

A new variotherm molding apparatus is presented in this paper for the fabrication of high aspect ratio 316L stainless steel micro-structures using micro powder injection molding (μPIM) technology. The molding apparatus prototype includes an injection mold in which a silicon insert with an array of 24 × 24 (576) microcavities is mounted, a set of rapid tempering systems for the mold and a set of vacuum systems. The key advantage of this molding apparatus lies in the real-time monitoring and rapid adjustment of the mold cavity temperature during injection molding and part ejection, which makes molding and demolding of high aspect ratio green micro-structures possible. For example, incomplete filling occurs while injection molding micro-structures of 60 µm × height 191 µm with an aspect ratio of 3.2 using a conventional mold. In comparison, smaller micro-structures with higher aspect ratio are produced successfully in the case of the new molding apparatus, e.g. micro-structures of 40 µm × height 174 µm with an aspect ratio of 4.35 and 20 µm × height 160 µm with an aspect ratio of 8 were molded successfully.

[1]  V. Piotter,et al.  Injection molding and related techniques for fabrication of microstructures , 1997 .

[2]  K. Suzuki,et al.  High aspect ratio electrostatic micro actuators using LIGA process , 2000 .

[3]  S. Tor,et al.  Production of metal matrix composite part by powder injection molding , 2001 .

[4]  R. Divan,et al.  Microfabrication of freestanding metal structures released from graphite substrates , 2002, Technical Digest. MEMS 2002 IEEE International Conference. Fifteenth IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.02CH37266).

[5]  H. Manohara,et al.  Rapid replication of polymeric and metallic high aspect ratio microstructures using PDMS and LIGA technology , 2002 .

[6]  S. Tor,et al.  Micro-powder injection molding , 2002 .

[7]  Abu Samah Zuruzi,et al.  High-aspect-ratio bulk micromachining of titanium , 2004, Nature materials.

[8]  N. Kaji,et al.  Separation of long DNA molecules by quartz nanopillar chips under a direct current electric field. , 2004, Analytical chemistry.

[9]  S. H. Lee,et al.  Fabrication of nanostructures of polyethylene glycol for applications to protein adsorption and cell adhesion , 2005, Nanotechnology.

[10]  Hywel Morgan,et al.  Superhydrophobicity and superhydrophilicity of regular nanopatterns. , 2005, Nano letters.

[12]  V. Piotter,et al.  Microinjection Molding ‐ Principles and Challenges , 2005 .

[13]  Mark G. Allen,et al.  Hollow metal microneedles for insulin delivery to diabetic rats , 2005, IEEE Transactions on Biomedical Engineering.

[14]  C. L. Cheung,et al.  Fabrication of nanopillars by nanosphere lithography , 2006 .