Advanced Flux-Switching Permanent Magnet Brushless Machines

This paper overviews the recent development and new topologies of flux-switching (FS) machines, with particularly emphasis on the permanent magnet (PM) type. Specific design issues, including winding configurations, combinations of stator and rotor pole numbers, rotor pole width, split ratio, etc., are investigated, while the torque capability of selected FSPM machines is also compared.

[1]  S. E. Rauch,et al.  Design Principles of Flux-Switch Alternators [includes discussion] , 1955, Transactions of the American Institute of Electrical Engineers. Part III: Power Apparatus and Systems.

[2]  C. Pollock,et al.  The flux switching motor, a DC motor without magnets or brushes , 1999, Conference Record of the 1999 IEEE Industry Applications Conference. Thirty-Forth IAS Annual Meeting (Cat. No.99CH36370).

[3]  Bernard Multon,et al.  Influence of magnetic losses on maximum power limits of synchronous permanent magnet drives in flux-weakening mode , 2000, Conference Record of the 2000 IEEE Industry Applications Conference. Thirty-Fifth IAS Annual Meeting and World Conference on Industrial Applications of Electrical Energy (Cat. No.00CH37129).

[4]  C. Pollock,et al.  Comparison of the acoustic noise of a flux switching and a switched reluctance drive , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[5]  C. Pollock,et al.  Low cost, high power density, flux switching machines and drives for power tools , 2003, 38th IAS Annual Meeting on Conference Record of the Industry Applications Conference, 2003..

[6]  D. Howe,et al.  Analysis of electromagnetic performance of flux-switching permanent-magnet Machines by nonlinear adaptive lumped parameter magnetic circuit model , 2005, IEEE Transactions on Magnetics.

[7]  W. Hua,et al.  Comparison of flux-switching and doubly-salient permanent magnet brushless machines , 2005, 2005 International Conference on Electrical Machines and Systems.

[8]  C. Pollock,et al.  A permanent magnet flux switching motor for low energy axial fans , 2005, Fourtieth IAS Annual Meeting. Conference Record of the 2005 Industry Applications Conference, 2005..

[9]  Mohamed Gabsi,et al.  Design and comparison of different flux‐switch synchronous machines for an aircraft oil breather application , 2005 .

[10]  J.X. Shen,et al.  Novel Permanent Magnet Switching Flux Motors , 2006, Proceedings of the 41st International Universities Power Engineering Conference.

[11]  D. Howe,et al.  Investigation of end effect in permanent magnet brushless machines having magnets on the stator , 2006 .

[12]  D. Howe,et al.  Eddy Current Loss in the Frame of a Flux-Switching Permanent Magnet Machine , 2006, IEEE Transactions on Magnetics.

[13]  D. Howe,et al.  Starting Torque of Single-Phase Flux-Switching Permanent Magnet Motors , 2006, INTERMAG 2006 - IEEE International Magnetics Conference.

[14]  J.X. Shen,et al.  Comparative Study and Optimal Design of PM Switching Flux Motors , 2006, Proceedings of the 41st International Universities Power Engineering Conference.

[15]  C. Pollock,et al.  Flux-Switching Motors for Automotive Applications , 2003, IEEE Transactions on Industry Applications.

[16]  D. Howe,et al.  Comparative study of flux-switching and interior permanent magnet machines , 2007, 2007 International Conference on Electrical Machines and Systems (ICEMS).

[17]  E. Hoang,et al.  A new structure of a switching flux synchronous polyphased machine with hybrid excitation , 2007, 2007 European Conference on Power Electronics and Applications.

[18]  D. Howe,et al.  Analysis of a Novel Multi-Tooth Flux-Switching PM Brushless AC Machine for High Torque Direct-Drive Applications , 2008, IEEE Transactions on Magnetics.

[19]  Geraint W. Jewell,et al.  Fault-Tolerant Flux-Switching Permanent Magnet Brushless AC Machines , 2008, 2008 IEEE Industry Applications Society Annual Meeting.

[20]  Zhe Chen,et al.  Investigation of a new stator interior permanent magnet machine , 2008 .

[21]  D. Howe,et al.  Investigation of iron loss in flux-switching PM machines , 2008 .

[22]  Jiabin Wang,et al.  Design Considerations for Tubular Flux-Switching Permanent Magnet Machines , 2008, IEEE Transactions on Magnetics.

[23]  Z.Q. Zhu,et al.  Analysis and Optimization of Back EMF Waveform of a Flux-Switching Permanent Magnet Motor , 2008, IEEE Transactions on Energy Conversion.

[24]  D. Howe,et al.  Influence of design parameters on output torque of flux-switching permanent magnet machines , 2008, 2008 IEEE Vehicle Power and Propulsion Conference.

[25]  D. Howe,et al.  Analysis and reduction of magnet eddy current loss in flux-switching permanent magnet machines , 2008 .

[26]  D. Howe,et al.  Three-Dimensional Lumped-Parameter Magnetic Circuit Analysis of Single-Phase Flux-Switching Permanent-Magnet Motor , 2008, IEEE Transactions on Industry Applications.

[27]  Wei Hua,et al.  Comparison of electromagnetic performance of brushless motors having magnets in stator and rotor , 2008 .

[28]  D. Howe,et al.  Stator and Rotor Pole Combinations for Multi-Tooth Flux-Switching Permanent-Magnet Brushless AC Machines , 2008, IEEE Transactions on Magnetics.

[29]  Z.Q. Zhu,et al.  Hybrid excited flux-switching permanent magnet machines , 2009, 2009 13th European Conference on Power Electronics and Applications.

[30]  R. Deodhar,et al.  Influence of PWM on the Proximity Loss in Permanent-Magnet Brushless AC Machines , 2009 .

[31]  Bing Xia,et al.  A Modular Permanent-Magnet Flux-Switching Linear Machine With Fault-Tolerant Capability , 2009, IEEE Transactions on Magnetics.

[32]  G. Jewell,et al.  Cogging Torque in Flux-Switching Permanent Magnet Machines , 2009, IEEE Transactions on Magnetics.

[33]  B. Mecrow,et al.  A wound-field three-phase flux-switching synchronous motor with all excitation sources on the stator , 2009, 2009 IEEE Energy Conversion Congress and Exposition.

[34]  Gan Zhang,et al.  A Novel Hybrid Excitation Flux-Switching Motor for Hybrid Vehicles , 2009, IEEE Transactions on Magnetics.

[35]  Heyun Lin,et al.  Magnetic field analysis of a novel flux switching transverse flux permanent magnet wind generator with 3-D FEM , 2009, 2009 International Conference on Power Electronics and Drive Systems (PEDS).

[36]  G. Jewell,et al.  Proximity Loss Study In High Speed Flux-Switching Permanent Magnet Machine , 2009, IEEE Transactions on Magnetics.

[37]  Jian-Xin Shen,et al.  A New Method for Reduction of Detent Force in Permanent Magnet Flux-Switching Linear Motors , 2009, IEEE Transactions on Magnetics.

[38]  D. Howe,et al.  Multiphase Flux-Switching Permanent-Magnet Brushless Machine for Aerospace Application , 2009 .

[39]  P.C.K. Luk,et al.  A novel outer-rotor permanent-magnet flux-switching machine for urban electric vehicle propulsion , 2009, 2009 3rd International Conference on Power Electronics Systems and Applications (PESA).

[40]  Z Q Zhu,et al.  Comparison of All- and Alternate-Poles-Wound Flux-Switching PM Machines Having Different Stator and Rotor Pole Numbers , 2009, IEEE Transactions on Industry Applications.

[41]  J. T. Chen,et al.  Influence of the Rotor Pole Number on Optimal Parameters in Flux-Switching PM Brushless AC Machines by the Lumped-Parameter Magnetic Circuit Model , 2009, IEEE Transactions on Industry Applications.

[42]  Z. Zhu,et al.  Hybrid-Excited Flux-Switching Permanent-Magnet Machines With Iron Flux Bridges , 2010, IEEE Transactions on Magnetics.

[43]  Z. Zhu,et al.  Winding Configurations and Optimal Stator and Rotor Pole Combination of Flux-Switching PM Brushless AC Machines , 2010, IEEE Transactions on Energy Conversion.

[44]  Z. Q. Zhu,et al.  Coil connections and winding factors in flux‐switching PM brushless AC machines , 2011 .