Black silicon: substrate for laser 3D micro/nano-polymerization.

We demonstrate that black silicon (b-Si) made by dry plasma etching is a promising substrate for laser three-dimensional (3D) micro/nano-polymerization. High aspect ratio Si-needles, working as sacrificial support structures, have flexibility required to relax interface stresses between substrate and the polymerized micro-/nano- objects. Surface of b-Si can be made electrically conductive by metal deposition and, at the same time, can preserve low optical reflectivity beneficial for polymerization by direct laser writing. 3D laser polymerization usually performed at the irradiation conditions close to the dielectric breakdown is possible on non-reflective and not metallic surfaces. Here we show that low reflectivity and high metallic conductivity are not counter- exclusive properties for laser polymerization. Electrical conductivity of substrate and its permeability in liquids are promising for bio- and electroplating applications.

[1]  V. King,et al.  Emissivity of microstructured silicon. , 2010, Applied optics.

[2]  Mangirdas Malinauskas,et al.  Femtosecond visible light induced two-photon photopolymerization for 3D micro/nanostructuring in photoresists and photopolymers , 2010 .

[3]  Saulius Juodkazis,et al.  Photoelectrolysis of water: Solar hydrogen--achievements and perspectives. , 2010, Optics express.

[4]  Saulius Juodkazis,et al.  Femtosecond laser interference technique with diffractive beam splitter for fabrication of three-dimensional photonic crystals , 2001 .

[5]  Mangirdas Malinauskas,et al.  Direct laser writing of 3D micro/nanostructures on opaque surfaces , 2012, Photonics Europe.

[6]  Che Ting Chan,et al.  Photonic band gaps in three dimensions: New layer-by-layer periodic structures , 1994 .

[7]  A. Miyawaki,et al.  Nano-aquarium for dynamic observation of living cells fabricated by femtosecond laser direct writing of photostructurable glass , 2008, Biomedical microdevices.

[8]  C. Fotakis,et al.  Diffusion-assisted high-resolution direct femtosecond laser writing. , 2012, ACS nano.

[9]  Daniel Day,et al.  A method for prolonged imaging of motile lymphocytes , 2009, Immunology and cell biology.

[10]  B. Chichkov,et al.  Laser-fabricated dielectric optical components for surface plasmon polaritons. , 2006, Optics letters.

[11]  Saulius Juodkazis,et al.  Reduction of capillary force for high-aspect ratio nanofabrication , 2005 .

[12]  J. Pezoldt,et al.  Black luminescent silicon , 2011 .

[13]  E. Mazur,et al.  MICROSTRUCTURING OF SILICON WITH FEMTOSECOND LASER PULSES , 1998 .

[14]  H. Jin,et al.  Fabrication and optical characterization of light trapping silicon nanopore and nanoscrew devices , 2012, Nanotechnology.

[15]  A. Miyawaki,et al.  3D microfluidic chips with integrated functional microelements fabricated by a femtosecond laser for studying the gliding mechanism of cyanobacteria. , 2011, Lab on a chip.

[16]  Saulius Juodkazis,et al.  Nanoparticle-enhanced photopolymerization , 2009 .

[17]  C. Fotakis,et al.  Tuning cell adhesion by controlling the roughness and wettability of 3D micro/nano silicon structures. , 2010, Acta biomaterialia.

[18]  Miko Elwenspoek,et al.  The black silicon method: a universal method for determining the parameter setting of a fluorine-based reactive ion etcher in deep silicon trench etching with profile control , 1995 .

[19]  Saulius Juodkazis,et al.  Mechanical properties and tuning of three-dimensional polymeric photonic crystals , 2007 .

[20]  Saulius Juodkazis,et al.  Fabrication and properties of metalo-dielectric photonic crystal structures for infrared spectral region. , 2007, Optics express.

[21]  C. Fotakis,et al.  Ultra-low shrinkage hybrid photosensitive material for two-photon polymerization microfabrication. , 2008, ACS nano.

[22]  Saulius Juodkazis,et al.  Mechanisms of three-dimensional structuring of photo-polymers by tightly focussed femtosecond laser pulses. , 2010, Optics express.

[23]  R. Gadonas,et al.  Femtosecond laser polymerization of hybrid/integrated micro-optical elements and their characterization , 2010 .

[24]  Nickolay V Lavrik,et al.  Surface enhanced Raman spectroscopy for microfluidic pillar arrayed separation chips. , 2012, The Analyst.