Fluid-resistive bending sensor having perfect compatibility with flexible pneumatic balloon actuator

This paper proposes a novel bending sensor for flexible micro structures, especially Pneumatic Balloon Actuator (PBA) made of PDMS (polydi- methylsiloxan). Proposed sensor detects fluid resistance change depending on bending of fluidic structure. Structure of PBA with pneumatic channel is diverted to the fluid-resistive bending sensor without adding extra structure for sensor. Consequently, the proposed sensor has a perfect compatibility with PBA. A stiffness sensor is also designed by combining PBA and proposed bending sensor. 5 mm times 10 mm times 300 mum PDMS cantilever type stiffness sensor integrated with PBA and bending sensor could perform successfully. This paper describes the fluid-resistive bending sensor for flexible PBA and its application for stiffness sensor toward medical application.

[1]  I. Shimoyama,et al.  Fabrication of the Flexible Sensor Using SOI Wafer by Removing the Thick Silicon Layer , 2006, 19th IEEE International Conference on Micro Electro Mechanical Systems.

[2]  N. Chen,et al.  Flexible Skin with Two-Axis Bending Capability Made Using Weaving-By-Lithography Fabrication Method , 2006, 19th IEEE International Conference on Micro Electro Mechanical Systems.

[3]  Koichi Suzumori,et al.  New pneumatic rubber actuators to assist colonoscope insertion , 2006, Proceedings 2006 IEEE International Conference on Robotics and Automation, 2006. ICRA 2006..

[4]  E. Hwang,et al.  A Polymer-Based Flexible Tactile Sensor for Normal and Shear Load Detection , 2006, 19th IEEE International Conference on Micro Electro Mechanical Systems.

[5]  S. Konishi,et al.  All PDMS pneumatic microfinger with bidirectional motion and its application , 2006, Journal of Microelectromechanical Systems.

[6]  Satoshi Konishi,et al.  SMALL, SOFT AND SAFE ACTUATOR BY USING MEMS-BASED PNEUMATIC BALLOON ACTUATOR , 2006 .

[7]  Chang-Jin Kim,et al.  Micro-finger articulation by pneumatic parylene balloons , 2003, TRANSDUCERS '03. 12th International Conference on Solid-State Sensors, Actuators and Microsystems. Digest of Technical Papers (Cat. No.03TH8664).

[8]  S. Konishi,et al.  All PDMS pneumatic balloon actuators for bidirectional motion of micro finger , 2005, 18th IEEE International Conference on Micro Electro Mechanical Systems, 2005. MEMS 2005..

[9]  S. Konishi,et al.  Thin flexible end-effector using pneumatic balloon actuator , 2000, Proceedings IEEE Thirteenth Annual International Conference on Micro Electro Mechanical Systems (Cat. No.00CH36308).

[10]  Satoshi Konishi,et al.  Pneumatic micro hand and miniaturized parallel link robot for micro manipulation robot system , 2006, Proceedings 2006 IEEE International Conference on Robotics and Automation, 2006. ICRA 2006..

[11]  S. Konishi,et al.  Thin flexible end-effector using pneumatic balloon actuator , 2000 .