Neutronic analysis of candidate accident-tolerant cladding concepts in pressurized water reactors

A study analyzed the neutronics of alternate cladding materials in a pressurized water reactor (PWR) environment. Austenitic type 310 (310SS) and 304 stainless steels, ferritic Fe-20Cr-5Al (FeCrAl) and APMT™ alloys, and silicon carbide (SiC)-based materials were considered and compared with Zircaloy-4. SCALE 6.1 was used to analyze the associated neutronics penalty/advantage, changes in reactivity coefficients, and spectral variations once a transition in the cladding was made. In the cases examined, materials containing higher absorbing isotopes invoked a reduction in reactivity due to an increase in neutron absorption in the cladding. Higher absorbing materials produced a harder neutron spectrum in the fuel pellet, leading to a slight increase in plutonium production. A parametric study determined the geometric conditions required to match cycle length requirements for each alternate cladding material in a PWR. A method for estimating the end of cycle reactivity was implemented to compare each model to that of standard Zircaloy-4 cladding. By using a thinner cladding of 350 μm and keeping a constant outer diameter, austenitic stainless steels require an increase of no more than 0.5 wt% enriched 235U to match fuel cycle requirements, while the required increase for FeCrAl was about 0.1%. When modeling SiC (with slightly lowermore » thermal absorption properties than that of Zircaloy), a standard cladding thickness could be implemented with marginally less enriched uranium (~0.1%). Moderator temperature and void coefficients were calculated throughout the depletion cycle. Nearly identical reactivity responses were found when coolant temperature and void properties were perturbed for each cladding material. By splitting the pellet into 10 equal areal sections, relative fission power as a function of radius was found to be similar for each cladding material. FeCrAl and 310SS cladding have a slightly higher fission power near the pellet’s periphery due to the harder neutron spectrum in the system, causing more 239Pu breeding. An economic assessment calculated the change in fuel pellet production costs for use of each cladding. Furthermore, implementing FeCrAl alloys would increase fuel pellet production costs about 15% because of increased 235U enrichment and the additional UO2 pellet volume enabled by using thinner cladding.« less

[1]  Kurt A. Terrani,et al.  Silicon Carbide Oxidation in Steam up to 2 MPa , 2014 .

[2]  Steven J. Zinkle,et al.  Accident tolerant fuels for LWRs: A perspective , 2014 .

[3]  Martin Steinbrück,et al.  Synopsis and outcome of the QUENCH experimental program , 2010 .

[4]  Ivan Maldonado,et al.  Neutronics Studies of Uranium-Bearing Fully Ceramic Microencapsulated Fuel for Pressurized Water Reactors , 2014 .

[5]  Philip R. Page,et al.  ENDF/B-VII.0: Next Generation Evaluated Nuclear Data Library for Nuclear Science and Technology , 2006 .

[6]  M. McLinden,et al.  NIST Standard Reference Database 23: Reference Fluid Thermodynamic and Transport Properties-REFPROP, Version 8.0 , 2007 .

[7]  Kurt A. Terrani,et al.  High temperature oxidation of fuel cladding candidate materials in steam–hydrogen environments , 2013 .

[8]  Stephen M. Bowman,et al.  SCALE 6: Comprehensive Nuclear Safety Analysis Code System , 2011 .

[9]  K. Terrani,et al.  Silicon carbide composite for light water reactor fuel assembly applications , 2014 .

[10]  Y. Katoh,et al.  Handbook of SiC properties for fuel performance modeling , 2007 .

[11]  D. Carpenter.  An assessment of silicon carbide as a cladding material for light water reactors , 2010 .

[12]  Kevin T. Clarno,et al.  Coupled thermochemical, isotopic evolution and heat transfer simulations in highly irradiated UO2 nuclear fuel , 2013 .

[13]  Reactor physics assessment of thick silicon carbide clad PWR fuels , 2013 .

[14]  R. Adamson.  Effects of Neutron Irradiation on Microstructure and Properties of Zircaloy , 2000 .

[15]  Philippe Thevenin,et al.  DISCUSSION ABOUT HBS TRANSFORMATION IN HIGH BURN-UP FUELS , 2009 .

[16]  Akira Hasegawa,et al.  Continuous SiC fiber, CVI SiC matrix composites for nuclear applications: Properties and irradiation effects , 2014 .

[17]  Stephen M. Bowman,et al.  Reactor Physics Methods and Analysis Capabilities in SCALE , 2011 .

[18]  Kurt A. Terrani,et al.  Thermo-mechanical analysis of LWR SiC/SiC composite cladding , 2014 .

[19]  Steven J. Zinkle,et al.  Advanced Oxidation Resistant Iron-Based Alloys for LWR Fuel Cladding , 2014 .

[20]  P Hofmann,et al.  Current knowledge on core degradation phenomena, a review , 1999 .

[21]  M. Driscoll,et al.  The Linear Reactivity Model for Nuclear Fuel Management , 1991 .

[22]  Nathan M George,et al.  Neutronic analysis of candidate accident-tolerant iron alloy cladding concepts , 2013 .