Optimized Strain Long-Period Fiber Grating (LPFG) Sensors Operating at the Dispersion Turning Point

Two phenomena for enhancing the sensitivity of long-period fiber gratings are combined toward an increase of the sensitivity to strain of this type of devices: the dispersion turning point (DTP) and the cladding diameter reduction by an etching process. The results prove that sensitivities up to 20 pm/μϵ can be attained, which is a ten-fold improvement compared to the previous works. The sensitivity in the grating region, which is subjected to etching, does not depend on the order of the cladding mode responsible for the attenuation bands generated in the transmission spectrum, but on the proximity to the DTP for each mode order. On the other hand, the sensitivity to strain of the global structure, including the region without etching, can be increased for lower order modes in a perceptible way if the length of the etched region is smaller compared to the fiber region under stress. The experimental results are supported with simulations based on coupled-mode theory and on FIMMWAVE, which allows understanding the phenomena involved during the sensing process.

[1]  J. Judkins,et al.  Long-period fiber gratings as band-rejection filters , 1995 .

[2]  D. O. Culverhouse,et al.  The acousto-optic effect in single-mode fiber tapers and couplers , 1996 .

[3]  A. Vengsarkar,et al.  Optical fiber long-period grating sensors. , 1996, Optics letters.

[4]  R. Claus,et al.  Temperature-insensitive and strain-insensitive long-period grating sensors for smart structures , 1997 .

[5]  V. Bhatia.  Applications of long-period gratings to single and multi-parameter sensing. , 1999, Optics express.

[6]  S. James,et al.  Optical fibre long-period grating sensors: characteristics and application , 2003 .

[7]  Thomas K. Gaylord,et al.  Transmission characteristics of long-period fiber gratings having arbitrary azimuthal/radial refractive index variations , 2003 .

[8]  Philippe Lalanne,et al.  Optimization of sensitivity in Long Period Fiber Gratings with overlay deposition. , 2005, Optics Express.

[9]  Ignacio Del Villar,et al.  Influence on cladding mode distribution of overlay deposition on long-period fiber gratings. , 2006, Journal of the Optical Society of America. A, Optics, image science, and vision.

[10]  S. Campopiano,et al.  Mode transition in high refractive index coated long period gratings. , 2006, Optics express.

[11]  Predrag Mikulic,et al.  Measurements of reactive ion etching process effect using long-period fiber gratings. , 2014, Optics express.

[12]  Ignacio Del Villar,et al.  Ultrahigh-sensitivity sensors based on thin-film coated long period gratings with reduced diameter, in transition mode and near the dispersion turning point , 2015 .

[13]  D. Leduc,et al.  Global overview of the sensitivity of long period gratings to strain , 2016 .

[14]  Ignacio Del Villar,et al.  Sensitivity optimization with cladding-etched long period fiber gratings at the dispersion turning point. , 2016, Optics express.

[15]  Predrag Mikulic,et al.  Towards refractive index sensitivity of long-period gratings at level of tens of µm per refractive index unit: fiber cladding etching and nano-coating deposition. , 2016, Optics express.

[16]  Stephen W. James,et al.  Sensitivity Enhancement in Low Cutoff Wavelength Long-Period Fiber Gratings by Cladding Diameter Reduction , 2017, Sensors.

[17]  Francesco Baldini,et al.  Towards a Uniform Metrological Assessment of Grating-Based Optical Fiber Sensors: From Refractometers to Biosensors , 2017, Biosensors.