Parametric study and design of liquid cooling plates for high power density IGBT modules in wind power generation systems

[1]  Cong-Hui Wang,et al.  Numerical investigation on a lithium-ion battery thermal management system utilizing a double-layered I-shaped channel liquid cooling plate exchanger , 2023, International Journal of Thermal Sciences.

[2]  Xiaoli Yu,et al.  Synergistic improvement of melting rate and heat storage capacity by a rotation-based method for shell-and-tube latent thermal energy storage , 2023, Applied Thermal Engineering.

[3]  Zhi Li,et al.  Scenario analysis, management, and optimization of a new Vehicle-to-Micro-Grid (V2μG) network based on off-grid renewable building energy systems , 2022, Applied Energy.

[4]  C. Chao,et al.  Hybrid nanofluid spray cooling performance and its residue surface effects: Toward thermal management of high heat flux devices , 2022, Applied Thermal Engineering.

[5]  Yidong Fang,et al.  Numerical investigation on optimal design of battery cooling plate for uneven heat generation conditions in electric vehicles , 2022, Applied Thermal Engineering.

[6]  S. Khandekar,et al.  Copper Wick based Loop Heat Pipe for Thermal Management of a High-power LED Module , 2022, Applied Thermal Engineering.

[7]  P. Zhang,et al.  Effects of the outlet pressure on two-phase slug flow distribution uniformity in a multi-branch microchannel , 2022, Journal of Zhejiang University-SCIENCE A.

[8]  Hongming Xu,et al.  Transferable representation modelling for real-time energy management of the plug-in hybrid vehicle based on k-fold fuzzy learning and Gaussian process regression , 2022, Applied Energy.

[9]  Zhi Li,et al.  Techno-economic analysis and optimization of a novel hybrid solar-wind-bioethanol hydrogen production system via membrane reactor , 2022, Energy Conversion and Management.

[10]  Xin Ma,et al.  Impacts of the COVID-19 pandemic on the energy sector , 2021, Journal of Zhejiang University-SCIENCE A.

[11]  Fuqiang Wang,et al.  Numerical optimization of the cooling effect of the bionic spider-web channel cold plate on a pouch lithium-ion battery , 2021 .

[12]  Bin Shuai,et al.  Knowledge Implementation and Transfer With an Adaptive Learning Network for Real-Time Power Management of the Plug-in Hybrid Vehicle , 2021, IEEE Transactions on Neural Networks and Learning Systems.

[13]  Liang Tong,et al.  Experimental study on small power generation energy storage device based on pneumatic motor and compressed air , 2021 .

[14]  T. Amalesh,et al.  Introducing new designs of minichannel cold plates for the cooling of Lithium-ion batteries , 2020 .

[15]  A. Roskilly,et al.  Applications and technological challenges for heat recovery, storage and utilisation with latent thermal energy storage , 2020 .

[16]  Zhien Zhang,et al.  Thermal management and temperature uniformity enhancement of electronic devices by micro heat sinks: A review , 2020 .

[17]  Pan Mei,et al.  A novel approach for Lithium-ion battery thermal management with streamline shape mini channel cooling plates , 2019, Applied Thermal Engineering.

[18]  Yangang Wang,et al.  Investigation of heat transfer and thermal stresses of novel thermal management system integrated with vapour chamber for IGBT power module , 2019, Thermal Science and Engineering Progress.

[19]  Xiaobing Luo,et al.  A Bi-Layer compact thermal model for uniform chip temperature control with non-uniform heat sources by genetic-algorithm optimized microchannel cooling , 2019, International Journal of Thermal Sciences.

[20]  Ping-an Du,et al.  Heat transfer improvement in microchannel heat sink by topology design and optimization for high heat flux chip cooling , 2019, International Journal of Heat and Mass Transfer.

[21]  W. Zhou,et al.  Investigation of fluid flow and heat transfer characteristics of parallel flow double-layer microchannel heat exchanger , 2018, Applied Thermal Engineering.

[22]  J. Thome,et al.  Hydrodynamic and thermal analysis of a micro-pin fin evaporator for on-chip two-phase cooling of high density power micro-electronics , 2018 .

[23]  Tassos G. Karayiannis,et al.  Flow boiling in microchannels: Fundamentals and applications , 2017 .

[24]  Zhihua Chen,et al.  Influence of geometric parameters on flow and heat transfer performance of micro-channel heat sinks , 2016 .

[25]  Gongnan Xie,et al.  Efficient on-chip hotspot removal combined solution of thermoelectric cooler and mini-channel heat sink , 2016 .

[26]  Ritunesh Kumar,et al.  Twenty first century cooling solution: Microchannel heat sinks. , 2014 .

[27]  Rong Guo,et al.  Heat dissipation analysis and optimization of lithium-ion batteries with a novel parallel-spiral serpentine channel liquid cooling plate , 2022, International Journal of Heat and Mass Transfer.

[28]  S. Nada,et al.  Performance enhancement and comprehensive experimental comparative study of cold plate cooling of electronic servers using different configurations of mini-channels flow , 2021 .

[29]  Guoqing Zhang,et al.  A novel strategy to optimize the liquid cooling plates for battery thermal management by precisely tailoring the internal structure of the flow channels , 2022, International Journal of Thermal Sciences.