Thermal 3D model for Direct Solar Steam Generation under superheated conditions

Parabolic-trough collectors (PTC) solar systems are one of the most promising of a wide range of the available solar technologies. Continuous breakthroughs are being achieved. Mainly due to the considerable amount of solar PTC plants that are being under operation in different countries. Within this continuous improvement effort, Direct Steam Generation (DSG) has been under development. DSG will lead to cheaper systems, not only for electricity generation but for heat process requirements. Working with superheated steam as thermal fluid, implies thicker pipe walls. Current numerical models neglect the radial dimension. In this context, simulating DSG absorbers implies considering radial domain discretization. A single phase model has been developed in order to work the 3D temperature field out on the solid parts, including the glass cover. Vacuum annulus has been assumed between stainless steel absorber and the glass envelope. The thermal radiative interaction between those parts has been considered without constant temperature assumption over the glass envelope. Finally, unidimensional approximation has been applied to the fluid domain. The whole code has been developed from the elemental (PDEs) governing equations and has been implemented in Matlab®. The numerical model has been validated from experimental results. These results have been gathered from an experimental DSG test facility with parabolic-troughs.

[1]  Emilio Baglietto,et al.  Modeling the dynamics of the multiphase fluid in the parabolic-trough solar steam generating systems , 2014 .

[2]  Yang Xu,et al.  Comparative and sensitive analysis for parabolic trough solar collectors with a detailed Monte Carlo ray-tracing optical model , 2014 .

[3]  María José Montes,et al.  Performance analysis of an Integrated Solar Combined Cycle using Direct Steam Generation in parabolic trough collectors , 2011 .

[4]  R. Forristall,et al.  Heat Transfer Analysis and Modeling of a Parabolic Trough Solar Receiver Implemented in Engineering Equation Solver , 2003 .

[5]  Eduardo Zarza,et al.  Uncertainty and global sensitivity analysis in the design of parabolic-trough direct steam generation plants for process heat applications , 2014 .

[6]  E. Zarza,et al.  INDITEP: The first pre-commercial DSG solar power plant , 2006 .

[7]  M. Eickhoff,et al.  Applied research concerning the direct steam generation in parabolic troughs , 2003 .

[8]  Chang Xu,et al.  Numerical study of heat transfer enhancement in the receiver tube of direct steam generation with parabolic trough by inserting metal foams , 2013 .

[9]  R. Almanza,et al.  Direct steam generation in parabolic trough concentrators with bimetallic receivers , 2004 .

[10]  W. Swinbank.  Long‐wave radiation from clear skies , 1963 .

[11]  Ahmed Amine Hachicha,et al.  Heat transfer analysis and numerical simulation of a parabolic trough solar collector , 2013 .

[12]  M. M. Rahman,et al.  Heat transfer analysis of parabolic trough solar receiver , 2011 .

[13]  Yongping Yang,et al.  Thermodynamic analysis of a novel integrated solar combined cycle , 2014 .

[14]  Markus Eck,et al.  Direct steam generation in parabolic troughs: Final results and conclusions of the DISS project , 2004 .

[15]  S. Churchill,et al.  A Correlating Equation for Forced Convection From Gases and Liquids to a Circular Cylinder in Crossflow , 1977 .

[16]  Emilio Baglietto,et al.  Modeling direct steam generation in solar collectors with multiphase CFD , 2014 .

[17]  Ya-Ling He,et al.  A MCRT and FVM coupled simulation method for energy conversion process in parabolic trough solar collector , 2011 .

[18]  M. Modest.  Radiative heat transfer , 1993 .

[19]  S. Kandlikar,et al.  Characterization of surface roughness effects on pressure drop in single-phase flow in minichannels , 2005 .

[20]  Juan Xiao,et al.  Three-dimensional numerical study of heat transfer characteristics in the receiver tube of parabolic trough solar collector , 2010 .

[21]  Loreto Valenzuela,et al.  Impact of pressure losses in small-sized parabolic-trough collectors for direct steam generation , 2013 .

[22]  Scott A. Jones,et al.  REPRESENTATIVE TERRESTRIAL SOLAR BRIGHTNESS PROFILES , 2002 .

[23]  Eduardo Zarza,et al.  Thermal analysis of solar receiver pipes with superheated steam , 2013 .

[24]  A. C. Ratzel,et al.  Techniques for reducing thermal conduction and natural convection heat losses in annular receiver geometries , 1979 .

[25]  B. S. Petukhov.  Heat Transfer and Friction in Turbulent Pipe Flow with Variable Physical Properties , 1970 .

[26]  John C. Dixon,et al.  The shock absorber handbook , 2007 .

[27]  Ya-Ling He,et al.  Numerical study on coupled fluid flow and heat transfer process in parabolic trough solar collector tube , 2010 .

[28]  Mahmood Yaghoubi,et al.  Analysis of Heat Losses of Absorber Tubes of Parabolic through Collector of Shiraz (Iran) Solar Power Plant , 2013 .

[29]  J. Nikuradse.  Laws of Flow in Rough Pipes , 1950 .

[30]  Ya-Ling He,et al.  Numerical simulation of a parabolic trough solar collector with nonuniform solar flux conditions by coupling FVM and MCRT method , 2012 .

[31]  D. Kearney,et al.  Test results: SEGS LS-2 solar collector , 1994 .