Latent heat thermal energy storage using cylindrical capsule: Numerical and experimental investigations

This paper is aimed at analyzing the melting behavior of paraffin wax as a phase change material (PCM) encapsulated in a cylindrical capsule, used in a latent heat thermal energy storage system with a solar water heating collector. The heat for melting of PCM in the capsule is provided by hot water surrounding it. Since it is observed experimentally that the phase change occurs in a range of temperature, the present analysis considers this range instead of constant phase change temperature and the deviation between the results of these two is presented. The numerical analysis has been carried out by using enthalpy method and the results are verified with the experimental data. The experiments have been done by visualization technique without disturbing the actual process of melting. Three distinct stages of melting process have been identified as revealed by visualization studies. Results indicate that the melting process is chiefly governed by the magnitude of the Stefan number, Ste, phase change temperature range and the capsule radius. The analysis shows that the agreement between analytical and experimental results is significantly improved when the results are obtained considering phase change temperature range and the natural convection in the liquid phase instead of considering the process to be conduction dominated only.

[1]  R. Viskanta,et al.  Solid-liquid phase-change heat transfer and interface motion in materials cooled or heated from above or below , 1980 .

[2]  A. Abhat Low temperature latent heat thermal energy storage: Heat storage materials , 1983 .

[3]  B. Zivkovic,et al.  An analysis of isothermal phase change of phase change material within rectangular and cylindrical containers , 2001 .

[4]  Hans Beer,et al.  Heat Transfer During Melting Inside a Horizontal Tube , 1983 .

[5]  M. Cross,et al.  Accurate solutions of moving boundary problems using the enthalpy method , 1981 .

[6]  J. W. Ramsey,et al.  Melting about a Horizontal Row of Heating Cylinders , 1979 .

[7]  Richard J Goldstein,et al.  An Experimental Study of Natural Convection Heat Transfer in Concentric and Eccentric Horizontal Cylindrical Annuli , 1978 .

[8]  T. Hirata,et al.  An analysis of heat transfer using equivalent thermal conductivity of liquid phase during melting inside an isothermally heated horizontal cylinder , 1989 .

[9]  H. Beer,et al.  Influence of natural convection on the melting process in a vertical cylindrical enclosure , 1980 .

[10]  R. Viskanta,et al.  Heat Transfer and Interface Motion During Melting and Solidification around a Finned Heat Source/Sink , 1981 .

[11]  L. S. Yao,et al.  Effects of Natural Convection in the Melted Region Around a Heated Horizontal Cylinder , 1980 .

[12]  M. Dimaano,et al.  Performance investigation of the capric and lauric acid mixture as latent heat energy storage for a cooling system , 2002 .

[13]  Richard J Goldstein,et al.  Correlating equations for natural convection heat transfer between horizontal circular cylinders , 1976 .

[14]  Hisham Ettouney,et al.  Heat Transfer in Vertically Aligned Phase Change Energy Storage Systems , 1999 .

[15]  Luisa F. Cabeza,et al.  Review on thermal energy storage with phase change: materials, heat transfer analysis and applications , 2003 .

[16]  A. Abhat Low Temperature Latent Heat Thermal Energy Storage , 1982 .

[17]  G. Faninger Thermal Energy Storage , 2005 .

[18]  Ephraim M Sparrow,et al.  Photographic study of melting about an embedded horizontal heating cylinder , 1979 .

[19]  T. Saitoh,et al.  High Rayleigh Number Solutions to Problems of Latent Heat Thermal Energy Storage in a Horizontal Cylinder Capsule , 1982 .

[20]  Richard J Goldstein,et al.  An experimental and theoretical study of natural convection in the annulus between horizontal concentric cylinders , 1976, Journal of Fluid Mechanics.

[21]  M. Lacroix,et al.  Melting of a PCM inside a vertical cylindrical capsule , 1995 .

[22]  W. Leidenfrost,et al.  An experimental investigation of natural convection in the melted region around a heated horizontal cylinder , 1979, Journal of Fluid Mechanics.

[23]  Fredrik Setterwall,et al.  Phase transition temperature ranges and storage density of paraffin wax phase change materials , 2004 .

[24]  R. Viskanta,et al.  Latent Heat-of-Fusion Energy Storage: Experiments on Heat Transfer from Cylinders During Melting , 1979 .

[25]  Ephraim M Sparrow,et al.  Inward Melting in a Vertical Tube Which Allows Free Expansion of the Phase-Change Medium , 1982 .

[26]  R. Velraj,et al.  Heat transfer enhancement in a latent heat storage system , 1999 .

[27]  H. Beer,et al.  An analytical solution of the heat transfer process during melting of an unfixed solid phase change material inside a horizontal tube , 1984 .

[28]  R. Viskanta,et al.  Photographic observation of the solid-liquid interface motion during melting of a solid heated from an isothermal vertical wall , 1978 .

[29]  The Melting Process of Ice Inside a Horizontal Cylinder: Effects of Density Anomaly , 1986 .

[30]  Ephraim M Sparrow,et al.  ANALYSIS OF MULTIDIMENSIONAL CONDUCTION PHASE CHANGE VIA THE ENTHALPY MODEL. , 1975 .

[31]  S. M. Hasnain Review on sustainable thermal energy storage technologies, Part I: heat storage materials and techniques , 1998 .