UV epoxy bonding for enhanced SAW transmission and microscale acoustofluidic integration.

Surface acoustic waves (SAWs) are appealing as a means to manipulate fluids within lab-on-a-chip systems. However, current acoustofluidic devices almost universally rely on elastomeric materials, especially PDMS, that are inherently ill-suited for conveyance of elastic energy due to their strong attenuation properties. Here, we explore the use of a low-viscosity UV epoxy resin for room temperature bonding of lithium niobate (LiNbO(3)), the most widely used anisotropic piezoelectric substrate used in the generation of SAWs, to standard micromachined superstrates such as Pyrex® and silicon. The bonding methodology is straightforward and allows for reliable production of sub-micron bonds that are capable of enduring the high surface strains and accelerations needed for conveyance of SAWs. Devices prepared with this approach display as much as two orders of magnitude, or 20 dB, improvement in SAW transmission compared to those fabricated using the standard PDMS elastomer. This enhancement enables a broad range of applications in acoustofluidics that are consistent with the low power requirements of portable battery-driven circuits and the development of genuinely portable lab-on-a-chip devices. The method is exemplified in the fabrication of a closed-loop bidirectional SAW pumping concept with applications in micro-scale flow control, and represents the first demonstration of closed channel SAW pumping in a bonded glass/LiNbO(3) device.

[1]  Ryutaro Maeda,et al.  Room-temperature wafer bonding of Si to LiNbO3, LiTaO3 and Gd3Ga5O12 by Ar-beam surface activation , 2001 .

[2]  Colin Campbell,et al.  Surface Acoustic Wave Devices for Mobile and Wireless Communications , 1998 .

[3]  Julien Reboud,et al.  Tuneable surface acoustic waves for fluid and particle manipulations on disposable chips. , 2010, Lab on a chip.

[4]  G. Whitesides,et al.  Rapid Prototyping of Microfluidic Systems in Poly(dimethylsiloxane). , 1998, Analytical chemistry.

[5]  P. Günter,et al.  Optical and electro-optical properties of submicrometer lithium niobate slab waveguides prepared by crystal ion slicing and wafer bonding , 2004 .

[6]  I-Kao Chiang,et al.  Three-dimensional continuous particle focusing in a microfluidic channel via standing surface acoustic waves (SSAW). , 2011, Lab on a chip.

[7]  James Friend,et al.  Template-free synthesis and encapsulation technique for layer-by-layer polymer nanocarrier fabrication. , 2011, ACS nano.

[8]  D A Weitz,et al.  Surface acoustic wave actuated cell sorting (SAWACS). , 2010, Lab on a chip.

[9]  James Friend,et al.  Rotational microfluidic motor for on-chip microcentrifugation , 2011 .

[10]  James Friend,et al.  Double aperture focusing transducer for controlling microparticle motions in trapezoidal microchannels with surface acoustic waves , 2009 .

[11]  Carl Eckart,et al.  Vortices and Streams Caused by Sound Waves , 1948 .

[12]  Fabio Beltram,et al.  Polydimethylsiloxane-LiNbO3 surface acoustic wave micropump devices for fluid control into microchannels. , 2008, Lab on a chip.

[13]  James Friend,et al.  Particle concentration and mixing in microdrops driven by focused surface acoustic waves , 2008 .

[14]  Leslie Y Yeo,et al.  Ultrafast microfluidics using surface acoustic waves. , 2009, Biomicrofluidics.

[15]  James Friend,et al.  Quantification of surface acoustic wave induced chaotic mixing-flows in microfluidic wells , 2011 .

[16]  Leslie Y Yeo,et al.  Surface vibration induced spatial ordering of periodic polymer patterns on a substrate. , 2008, Langmuir : the ACS journal of surfaces and colloids.

[17]  T. Huang,et al.  Continuous particle separation in a microfluidic channel via standing surface acoustic waves (SSAW). , 2009, Lab on a chip.

[18]  Leslie Y Yeo,et al.  Miniature inhalation therapy platform using surface acoustic wave microfluidic atomization. , 2009, Lab on a chip.

[19]  Rerngchai Arayanarakool,et al.  Low-temperature, simple and fast integration technique of microfluidic chips by using a UV-curable adhesive. , 2010, Lab on a chip.

[20]  James Friend,et al.  Unique flow transitions and particle collection switching phenomena in a microchannel induced by surface acoustic waves , 2010 .

[21]  S. Quake,et al.  Microfluidics: Fluid physics at the nanoliter scale , 2005 .

[22]  Tadatomo Suga,et al.  Room temperature bonding of silicon and lithium niobate , 2006 .

[23]  James Friend,et al.  Transmitting high power rf acoustic radiation via fluid couplants into superstrates for microfluidics , 2009 .

[24]  J. Friend,et al.  Microscale acoustofluidics: Microfluidics driven via acoustics and ultrasonics , 2011 .

[25]  Stephen J. Martin,et al.  Dynamics and Response of Polymer-Coated Surface Acoustic Wave Devices: Effect of Viscoelastic Properties and Film Resonance , 1994 .

[26]  Jiang Zhe,et al.  Recent advances in particle and droplet manipulation for lab-on-a-chip devices based on surface acoustic waves. , 2011, Lab on a chip.

[27]  Yi Zhang,et al.  Integrated immunoassay using tuneable surface acoustic waves and lensfree detection. , 2011, Lab on a chip.

[28]  Fabio Beltram,et al.  Surface-acoustic-wave counterflow micropumps for on-chip liquid motion control in two-dimensional microchannel arrays. , 2010, Lab on a chip.

[29]  James Friend,et al.  Rapid fluid flow and mixing induced in microchannels using surface acoustic waves , 2009 .

[30]  A. Wixforth,et al.  Planar chip device for PCR and hybridization with surface acoustic wave pump. , 2005, Lab on a chip.

[31]  J. Friend,et al.  Fabrication of microfluidic devices using polydimethylsiloxane. , 2010, Biomicrofluidics.

[32]  Feng Guo,et al.  Milliseconds mixing in microfluidic channel using focused surface acoustic wave , 2011 .