Building envelope-combined phase change material and thermal insulation for energy-effective buildings during harsh summer: Simulation-based analysis

[1]  M. Alim,et al.  Combined use of phase change material and thermal insulation to improve energy efficiency of residential buildings , 2022, Journal of Energy Storage.

[2]  Yassine Kharbouch.  Effectiveness of phase change material in improving the summer thermal performance of an office building under future climate conditions: An investigation study for the Moroccan Mediterranean climate zone , 2022, Journal of Energy Storage.

[3]  K. Baba,et al.  Energy, environmental, and economic analysis of different buildings envelope integrated with phase change materials in different climates , 2022, Solar Energy.

[4]  D. Ting,et al.  Energy consumption of a building with phase change material walls – The effect of phase change material properties , 2022, Journal of Energy Storage.

[5]  M. Afrand,et al.  Which one is more effective to add to building envelope: Phase change material, thermal insulation, or their combination to meet zero-carbon-ready buildings? , 2022, Journal of Cleaner Production.

[6]  M. Arıcı,et al.  PCM-enhanced sunspace for energy efficiency and CO2 mitigation in a house in mediterranean climate , 2022, Journal of Building Engineering.

[7]  Qudama Al-Yasiri,et al.  Phase change material coupled building envelope for thermal comfort and energy-saving: Effect of natural night ventilation under hot climate , 2022, Journal of Cleaner Production.

[8]  Qudama Al-Yasiri,et al.  Energetic and thermal comfort assessment of phase change material passively incorporated building envelope in severe hot Climate: An experimental study , 2022, Applied Energy.

[9]  Z. A. Al-Absi,et al.  Experimental study on the thermal performance of PCM-based panels developed for exterior finishes of building walls , 2022, Journal of Building Engineering.

[10]  M. Sharaf,et al.  Year-round energy and exergy performance investigation of a photovoltaic panel coupled with metal foam/phase change material composite , 2022, Renewable Energy.

[11]  Hao Li,et al.  Integrated Building Envelope Performance Evaluation Method Towards Nearly Zero Energy Buildings Based on Operation Data , 2022, SSRN Electronic Journal.

[12]  Velraj Ramalingam,et al.  A pathway towards healthy and naturally ventilated indoor built environment through phase change material and insulation techniques for office buildings in India , 2021, Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy.

[13]  A. Al-Mudhafar,et al.  Potential of integrating PCMs in residential building envelope to reduce cooling energy consumption , 2021 .

[14]  M. Stefanidou,et al.  Defensive behaviour of building envelopes in terms of mechanical and thermal responsiveness by incorporating PCMs in cement mortar layers , 2021 .

[15]  Qudama Al-Yasiri,et al.  Thermal performance of concrete bricks based phase change material encapsulated by various aluminium containers: An experimental study under Iraqi hot climate conditions , 2021 .

[16]  Abdulwahab A. Alnaqi,et al.  Energy-saving of building envelope using passive PCM technique: A case study of Kuwait City climate conditions , 2021 .

[17]  Aakash C. Rai,et al.  Energy performance of phase change materials integrated into brick masonry walls for cooling load management in residential buildings , 2021, Building and Environment.

[18]  Qudama Al-Yasiri,et al.  Experimental evaluation of the optimal position of a macroencapsulated phase change material incorporated composite roof under hot climate conditions , 2021 .

[19]  Daniel Levacher,et al.  Impact of phase change materials on lightened earth hygroscopic, thermal and mechanical properties , 2021 .

[20]  Yanna Gao,et al.  Thermal behavior improvement of hollow sintered bricks integrated with both thermal insulation material (TIM) and Phase-Change Material (PCM) , 2021 .

[21]  Qudama Al-Yasiri,et al.  Case study on the optimal thickness of phase change material incorporated composite roof under hot climate conditions , 2021 .

[22]  Yuming Guo,et al.  Ambient Temperature and Years of Life Lost: A National Study in China , 2020, Innovation.

[23]  François Maréchal,et al.  Analysis of Energy Requirements versus Comfort Levels for the Integration of Phase Change Materials in Buildings , 2015, Thermal Energy Storage with Phase Change Materials.

[24]  Xiaojian Gao,et al.  Thermal and mechanical properties of ultra-high performance concrete incorporated with microencapsulated phase change material , 2020 .

[25]  Rouhollah Ahmadi,et al.  Utilising Latent Thermal Energy Storage in Building Envelopes to Minimise Thermal Loads and Enhance Comfort , 2020 .

[26]  J. Vidal,et al.  Enhancing building energy performance by effectively using phase change material and dynamic insulation in walls , 2020 .

[27]  K. M. Mini,et al.  Study on thermal insulating properties of PCM incorporated wall panels , 2020 .

[28]  Uma Maheswararao Gaddala,et al.  Investigation on compatibility and thermal reliability of phase change materials for low-temperature thermal energy storage , 2020, Materials for Renewable and Sustainable Energy.

[29]  J. R. Snape,et al.  Investigations towards lower cooling load in a typical residential building in Kurdistan (Iraq) , 2020 .

[30]  Tao Wen,et al.  Passive and active phase change materials integrated building energy systems with advanced machine-learning based climate-adaptive designs, intelligent operations, uncertainty-based analysis and optimisations: A state-of-the-art review , 2020 .

[31]  Pushpendra Kumar Singh Rathore,et al.  Yearly analysis of peak temperature, thermal amplitude, time lag and decrement factor of a building envelope in tropical climate , 2020 .

[32]  D. Li,et al.  Enhancement of PCM melting rate via internal fin and nanoparticles , 2020 .

[33]  Nima Amani,et al.  Developing a two-criteria framework to rank thermal insulation materials in nearly zero energy buildings using multi-objective optimization approach , 2020 .

[34]  L. Cabeza,et al.  Palm oil-based bio-PCM for energy efficient building applications: Multipurpose thermal investigation and life cycle assessment , 2020, Journal of Energy Storage.

[35]  Wenjie Gang,et al.  Study on thermal insulation characteristics and optimized design of pipe-embedded ventilation roof with outer-layer shape-stabilized PCM in different climate zones , 2020 .

[36]  Aakash C. Rai,et al.  Performance assessment of residential building envelopes enhanced with phase change materials , 2020, Energy and Buildings.

[37]  S. Memon,et al.  Quantitative evaluation of thermal performance and energy saving potential of the building integrated with PCM in a subarctic climate , 2020 .

[38]  M. Arıcı,et al.  PCM integrated to external building walls: An optimization study on maximum activation of latent heat , 2020 .

[39]  M. Arıcı,et al.  Seasonal and annual performance analysis of PCM-integrated building brick under the climatic conditions of Marmara region , 2020, Journal of Thermal Analysis and Calorimetry.

[40]  Xiangfei Kong,et al.  Experimental study on a novel hybrid system of active composite PCM wall and solar thermal system for clean heating supply in winter , 2020 .

[41]  Naouel Daouas,et al.  Energy and cost efficiency of phase change materials integrated in building envelopes under Tunisia Mediterranean climate , 2019, Energy.

[42]  Ebrahim Solgi,et al.  A parametric study of phase change material characteristics when coupled with thermal insulation for different Australian climatic zones , 2019, Building and Environment.

[43]  Uroš Stritih,et al.  Improved thermal energy storage for nearly zero energy buildings with PCM integration , 2019, Solar Energy.

[44]  Merih Aydinalp Koksal,et al.  Techno-economical analysis of building envelope and renewable energy technology retrofits to single family homes , 2018, Energy for Sustainable Development.

[45]  Francesco Goia,et al.  Phase Change Materials in Transparent Building Envelopes: A Strengths, Weakness, Opportunities and Threats (SWOT) Analysis , 2018 .

[46]  Hussein J. Akeiber,et al.  A newly composed paraffin encapsulated prototype roof structure for efficient thermal management in hot climate , 2016 .

[47]  Marcus Bianchi,et al.  Verification and validation of EnergyPlus phase change material model for opaque wall assemblies , 2012 .

[48]  P. Hurtado,et al.  Simple one-dimensional model of heat conduction which obeys Fourier's law. , 2001, Physical review letters.

[49]  Standard Ashrae.  Thermal Environmental Conditions for Human Occupancy , 1992 .