Root cause analysis of stress corrosion at tube-to-tubesheet joints of a waste heat boiler

[1]  Shugen Xu,et al.  Using FEM to determine the thermo-mechanical stress in tube to tube–sheet joint for the SCC failure analysis , 2013 .

[2]  Weiqiang Wang,et al.  Numerical investigation on weld residual stresses in tube to tube sheet joint of a heat exchanger , 2013 .

[3]  Hu Hai-jun.  Numerical Study on the Crevice Corrosion of 304 Stainless Steel , 2012 .

[4]  Vivekanand Kain,et al.  Role of residual stresses induced by industrial fabrication on stress corrosion cracking susceptibility of austenitic stainless steel , 2011 .

[5]  T. Ahmed,et al.  Failure analysis of 316L stainless steel tubing of the high-pressure still condenser , 2009 .

[6]  Chen Shi-jia,et al.  Reason Analysis and Countermeasures for Leakage of Middle-pressure Waste Heat Boiler , 2009 .

[7]  G. E. O. Widera,et al.  Connection strength and tightness of hydraulically expanded tube-to-tubesheet joints , 2007 .

[8]  Nesar Merah,et al.  Finite element evaluation of clearance effect on tube-to-tubesheet joint strength , 2003 .

[9]  A. Bazergui,et al.  Estimation of residual stresses in hydraulically expanded tube-to-tubesheet joints , 1998 .

[10]  S. Yokell,et al.  Expanded, and Welded-and-Expanded Tube-to-Tubesheet Joints , 1992 .

[11]  J. Galvele.  Transport processes in passivity breakdown—II. Full hydrolysis of the metal ions , 1981 .

[12]  J. Galvele,et al.  Transport Processes and the Mechanism of Pitting of Metals , 1976 .

[13]  M. Marek,et al.  Stress Corrosion Cracking of Austenitic Stainless Steel , 1970 .