High-power lithium ion batteries based on flexible and light-weight cathode of LiNi0.5Mn1.5O4/carbon nanotube film

Abstract We report the integration of high voltage cathode material LiNi 0.5 Mn 1.5 O 4 and multiwall carbon nanotube network for the first time, which has led to charge/discharge rate as high as 20C and has also been demonstrated to work as cathode for flexible batteries. The LiNi 0.5 Mn 1.5 O 4 / multiwall carbon nanotube network is flexible and light-weight since the use of binder, conductive additive and metal current collector is eliminated. Due to the high voltage provided by LiNi 0.5 Mn 1.5 O 4 particles, the total energy of the battery is significantly enhanced. In addition, with the high conductivity from multiwall carbon nanotube network, the LiNi 0.5 Mn 1.5 O 4 /multiwall carbon nanotube network electrodes can deliver 80% of the 1C capacity even when the charge/discharge current density increased to 20C (1C=140 mA/g). During the high current rate cycling test, no obvious capacity decay is observed after 100 cycles at 10C. Calculation of the polarization resistance R p reveals that the R p of the LiNi 0.5 Mn 1.5 O 4 /multiwall carbon nanotube electrodes is less than 25% of that of the conventional electrodes fabricated through slurry-casting on metal current collector. In addition, the power density calculated from LiNi 0.5 Mn 1.5 O 4 /multiwall carbon nanotube electrodes is over two times larger than that provided by the conventional electrodes. The combined effect from high voltage, high current rate performance and reduced weight has led our LiNi 0.5 Mn 1.5 O 4 /multiwall carbon nanotube electrodes to be a promising candidate for high-power lithium ion batteries. Moreover, the features of flexibility and light-weight also demonstrate the potential of applying the LiNi 0.5 Mn 1.5 O 4 / multiwall carbon nanotube electrodes in new-generation flexible or ultrathin/ultralight electronic devices in the future.

[1]  Qiang Zhang,et al.  Direct growth of flexible LiMn2O4/CNT lithium-ion cathodes. , 2011, Chemical communications.

[2]  John B. Goodenough,et al.  Challenges for rechargeable batteries , 2011 .

[3]  R. Holze,et al.  Cathode materials for lithium ion batteries prepared by sol-gel methods , 2004 .

[4]  Keon Jae Lee,et al.  Bendable inorganic thin-film battery for fully flexible electronic systems. , 2012, Nano letters.

[5]  M. Armand,et al.  Building better batteries , 2008, Nature.

[6]  J. Dahn,et al.  Synthesis and Electrochemistry of LiNi x Mn2 − x O 4 , 1997 .

[7]  Chusheng Chen,et al.  Electrochemical properties of nano- and micro-sized LiNi0.5Mn1.5O4 synthesized via thermal decomposition of a ternary eutectic Li–Ni–Mn acetate , 2010 .

[8]  Qian Cheng,et al.  Folding paper-based lithium-ion batteries for higher areal energy densities. , 2013, Nano letters.

[9]  M. Armand,et al.  Issues and challenges facing rechargeable lithium batteries , 2001, Nature.

[10]  Jiaqi Huang,et al.  Mass production of aligned carbon nanotube arrays by fluidized bed catalytic chemical vapor deposition , 2010 .

[11]  C. Chen,et al.  Effects of Al substitution for Ni and Mn on the electrochemical properties of LiNi0.5Mn1.5O4 , 2011 .

[12]  K. Jiang,et al.  Sulfur nanocrystals confined in carbon nanotube network as a binder-free electrode for high-performance lithium sulfur batteries. , 2014, Nano letters.

[13]  Soojin Park,et al.  Flexible high-energy Li-ion batteries with fast-charging capability. , 2014, Nano letters.

[14]  A. Manthiram,et al.  Understanding the Improvement in the Electrochemical Properties of Surface Modified 5 V Limn1.42Ni0.42Co0.16O4 Spinel Cathodes in Lithium-ion Cells , 2009 .

[15]  Yi Cui,et al.  Highly conductive paper for energy-storage devices , 2009, Proceedings of the National Academy of Sciences.

[16]  Seung M. Oh,et al.  Failure mechanisms of LiNi0.5Mn1.5O4 electrode at elevated temperature , 2012 .

[17]  Shoushan Fan,et al.  Binder‐Free LiCoO2/Carbon Nanotube Cathodes for High‐Performance Lithium Ion Batteries , 2012, Advanced materials.

[18]  Guangmin Zhou,et al.  Progress in flexible lithium batteries and future prospects , 2014 .

[19]  Qiang Zhang,et al.  High-performance flexible lithium-ion electrodes based on robust network architecture , 2012 .

[20]  Chongwu Zhou,et al.  Hierarchical three-dimensional ZnCo₂O₄ nanowire arrays/carbon cloth anodes for a novel class of high-performance flexible lithium-ion batteries. , 2012, Nano letters.

[21]  Zheng Jia,et al.  Tin anode for sodium-ion batteries using natural wood fiber as a mechanical buffer and electrolyte reservoir. , 2013, Nano letters.

[22]  Fei Zhao,et al.  Super‐Aligned Carbon Nanotube Films as Current Collectors for Lightweight and Flexible Lithium Ion Batteries , 2013 .

[23]  Jung-Yong Lee,et al.  Wearable textile battery rechargeable by solar energy. , 2013, Nano letters.

[24]  Jim Benson,et al.  Ultra strong silicon-coated carbon nanotube nonwoven fabric as a multifunctional lithium-ion battery anode. , 2012, ACS nano.

[25]  Xiaogang Han,et al.  Depolarized and fully active cathode based on Li(Ni0.5Co0.2Mn0.3)O2 embedded in carbon nanotube network for advanced batteries. , 2014, Nano letters.

[26]  Yang‐Kook Sun,et al.  Molten salt synthesis of LiNi0.5Mn1.5O4 spinel for 5 V class cathode material of Li-ion secondary battery , 2004 .

[27]  Liangbing Hu,et al.  MWCNT/V2O5 core/shell sponge for high areal capacity and power density Li-ion cathodes. , 2012, ACS nano.

[28]  Karim Zaghib,et al.  Spinel materials for high-voltage cathodes in Li-ion batteries , 2014 .

[29]  Bin Liu,et al.  Hierarchical silicon nanowires-carbon textiles matrix as a binder-free anode for high-performance advanced lithium-ion batteries , 2013, Scientific Reports.

[30]  C. Yoon,et al.  Comparative Study of LiNi0.5Mn1.5O4-δ and LiNi0.5Mn1.5O4 Cathodes Having Two Crystallographic Structures: Fd3̄m and P4332 , 2004 .

[31]  Beibei Liu,et al.  Improvement of electrochemical properties of LiNi0.5Mn1.5O4 spinel prepared by radiated polymer gel method , 2006 .

[32]  Chun-hua Chen,et al.  Synthesis of LiNi0.5Mn1.5O4 by solid-state reaction with improved electrochemical performance , 2011 .

[33]  Chusheng Chen,et al.  Study of LiNi0.5Mn1.5O4 synthesized via a chloride-ammonia co-precipitation method: Electrochemical performance, diffusion coefficient and capacity loss mechanism , 2009 .

[34]  M. Ge,et al.  Free-standing LiNi0.5Mn1.5O4/carbon nanofiber network film as lightweight and high-power cathode for lithium ion batteries. , 2014, ACS nano.

[35]  Jean-Marie Tarascon,et al.  Toward Understanding of Electrical Limitations (Electronic, Ionic) in LiMPO4 (M = Fe , Mn) Electrode Materials , 2005 .