Brazing TiAl intermetallics using TiNi-V eutectic brazing alloy

[1]  Pierre Villars,et al.  Handbook of Ternary Alloy Phase Diagrams , 1995 .

[2]  Shyi-Kaan Wu,et al.  Infrared joining of TiAl intermetallics using Ti15Cu15Ni foil—I. The microstructure morphologies of joint interfaces , 1998 .

[3]  B. Huneau,et al.  The ternary system Al-Ni-Ti Part I: Isothermal section at 900°C; Experimental investigation and thermodynamic calculation , 1999 .

[4]  H. Clemens,et al.  Diffusion bonding of ?-TiAl sheets , 1999 .

[5]  Edward A. Loria,et al.  Gamma titanium aluminides as prospective structural materials , 2000 .

[6]  Toshimitsu Tetsui,et al.  Development of a TiAl turbocharger for passenger vehicles , 2002 .

[7]  G. Chen,et al.  Deformation mechanism at large strains in a high-Nb-containing TiAL at room temperature , 2002 .

[8]  R. Shiue,et al.  Infrared brazing of TiAl using Al-based braze alloys , 2003 .

[9]  R. Shiue,et al.  Infrared brazing of TiAl intermetallic using BAg-8 braze alloy , 2003 .

[10]  P. Bowen,et al.  Thermal exposure induced α2 + γ → B2(ω) and α2 → B2(ω) phase transformations in a high Nb fully lamellar TiAl alloy , 2003 .

[11]  M. Bacos,et al.  Brazed joints in γ TiAl sheet: microstructure and properties , 2004 .

[12]  J. Wang,et al.  Microstructure refinement of cast TiAl alloys by β solidification , 2004 .

[13]  M. Yamaguchi,et al.  Effects of lamellar boundary structural change on lamellar size hardening in TiAl alloy , 2004 .

[14]  R. Shiue,et al.  Infrared brazing of TiAl intermetallic using pure silver , 2004 .

[15]  Satoru Kobayashi,et al.  Physical metallurgy for wrought gamma titanium aluminides: Microstructure control through phase transformations , 2005 .

[16]  Xinhua Wu.  Review of alloy and process development of TiAl alloys , 2006 .

[17]  Alain Lasalmonie,et al.  Intermetallics: Why is it so difficult to introduce them in gas turbine engines? , 2006 .

[18]  G. Q. Wu,et al.  Diffusion bonding of laser-surface-modified gamma titanium aluminide alloy to nickel-base casting alloy , 2007 .

[19]  J. Lin,et al.  Microsegregation in high Nb containing TiAl alloy ingots beyond laboratory scale , 2007 .

[20]  B. Tabernig,et al.  Development and evaluation of TiAl sheet structures for hypersonic applications , 2007 .

[21]  F. Kong,et al.  Microstructural refinement and mechanical properties of Y-bearing TiAl alloys , 2008 .

[22]  T. V. Melnichenko,et al.  Diffusion welding of γ-TiAl based alloys through nano-layered foil of Ti/Al system , 2008 .

[23]  Z. Hou,et al.  Microstructure and mechanical properties of as-cast Ti–43Al–9V–0.3Y alloy , 2009 .

[24]  F. Kong,et al.  Influence of yttrium on the high temperature deformability of TiAl alloys , 2009 .

[25]  Xiaoguo Song,et al.  Effect of Si3N4-particles addition in Ag–Cu–Ti filler alloy on Si3N4/TiAl brazed joint , 2011 .

[26]  Xiaoguo Song,et al.  Brazing high Nb containing TiAl alloy using TiNi–Nb eutectic braze alloy , 2012 .