A Nonfullerene Acceptor with Alkylthio‐ and Dimethoxy‐Thiophene‐Groups Yielding High‐Performance Ternary Organic Solar Cells

[1]  Monika Gupta,et al.  14%-efficiency fullerene-free ternary solar cell enabled by designing a short side-chain substituted small-molecule acceptor , 2019, Nano Energy.

[2]  Jacek Ulanski,et al.  Single-Junction Organic Solar Cell with over 15% Efficiency Using Fused-Ring Acceptor with Electron-Deficient Core , 2019, Joule.

[3]  S. Beaupré,et al.  Fused Benzothiadiazole: A Building Block for n‐Type Organic Acceptor to Achieve High‐Performance Organic Solar Cells , 2019, Advanced materials.

[4]  Tao Zhang,et al.  Achieving Over 15% Efficiency in Organic Photovoltaic Cells via Copolymer Design , 2019, Advanced materials.

[5]  Rui Wang,et al.  Enabling low voltage losses and high photocurrent in fullerene-free organic photovoltaics , 2019, Nature Communications.

[6]  A. Jen,et al.  Ternary non-fullerene polymer solar cells with 13.51% efficiency and a record-high fill factor of 78.13% , 2018 .

[7]  H. Ade,et al.  The Critical Impact of Material and Process Compatibility on the Active Layer Morphology and Performance of Organic Ternary Solar Cells , 2018, Advanced Energy Materials.

[8]  Yongfang Li,et al.  Use of two structurally similar small molecular acceptors enabling ternary organic solar cells with high efficiencies and fill factors , 2018 .

[9]  Fei Huang,et al.  Fine-tuning of the chemical structure of photoactive materials for highly efficient organic photovoltaics , 2018, Nature Energy.

[10]  W. Ma,et al.  Achieving Balanced Crystallinity of Donor and Acceptor by Combining Blade‐Coating and Ternary Strategies in Organic Solar Cells , 2018, Advanced materials.

[11]  Feng Liu,et al.  High-efficiency small-molecule ternary solar cells with a hierarchical morphology enabled by synergizing fullerene and non-fullerene acceptors , 2018, Nature Energy.

[12]  T. Russell,et al.  High-efficiency quaternary polymer solar cells enabled with binary fullerene additives to reduce nonfullerene acceptor optical band gap and improve carriers transport , 2018, Science China Chemistry.

[13]  Fan Yang,et al.  Morphology Control Enables Efficient Ternary Organic Solar Cells , 2018, Advanced materials.

[14]  H. Ade,et al.  Modulation of End Groups for Low‐Bandgap Nonfullerene Acceptors Enabling High‐Performance Organic Solar Cells , 2018, Advanced Energy Materials.

[15]  Yongsheng Chen,et al.  A chlorinated low-bandgap small-molecule acceptor for organic solar cells with 14.1% efficiency and low energy loss , 2018, Science China Chemistry.

[16]  H. Ade,et al.  A Highly Crystalline Fused‐Ring n‐Type Small Molecule for Non‐Fullerene Acceptor Based Organic Solar Cells and Field‐Effect Transistors , 2018, Advanced Functional Materials.

[17]  Zeyuan Li,et al.  Effect of Core Size on Performance of Fused-Ring Electron Acceptors , 2018, Chemistry of Materials.

[18]  Yang Yang,et al.  Unique Energy Alignments of a Ternary Material System toward High‐Performance Organic Photovoltaics , 2018, Advanced materials.

[19]  Yen‐Ju Cheng,et al.  Angular-Shaped 4,9-Dialkylnaphthodithiophene-Based Octacyclic Ladder-Type Non-Fullerene Acceptors for High Efficiency Ternary-Blend Organic Photovoltaics , 2018, Chemistry of Materials.

[20]  Thuc‐Quyen Nguyen,et al.  Bandgap Narrowing in Non‐Fullerene Acceptors: Single Atom Substitution Leads to High Optoelectronic Response Beyond 1000 nm , 2018, Advanced Energy Materials.

[21]  Yun Zhang,et al.  Fluorination vs. chlorination: a case study on high performance organic photovoltaic materials , 2018, Science China Chemistry.

[22]  F. Liu,et al.  Enhancing the Performance of Organic Solar Cells by Hierarchically Supramolecular Self-Assembly of Fused-Ring Electron Acceptors , 2018, Chemistry of Materials.

[23]  C. Zhong,et al.  Asymmetrical Ladder‐Type Donor‐Induced Polar Small Molecule Acceptor to Promote Fill Factors Approaching 77% for High‐Performance Nonfullerene Polymer Solar Cells , 2018, Advanced materials.

[24]  Hongbin Wu,et al.  Nonfullerene Polymer Solar Cells Based on a Main-Chain Twisted Low-Bandgap Acceptor with Power Conversion Efficiency of 13.2% , 2018, ACS Energy Letters.

[25]  Yongsheng Chen,et al.  Ternary Organic Solar Cells With 12.8% Efficiency Using Two Nonfullerene Acceptors With Complementary Absorptions , 2018, Advanced Energy Materials.

[26]  H. Ade,et al.  A Wide Band Gap Polymer with a Deep Highest Occupied Molecular Orbital Level Enables 14.2% Efficiency in Polymer Solar Cells. , 2018, Journal of the American Chemical Society.

[27]  Fujun Zhang,et al.  Efficient ternary non-fullerene polymer solar cells with PCE of 11.92% and FF of 76.5% , 2018 .

[28]  Zeyuan Li,et al.  Enhancing the Performance of Polymer Solar Cells via Core Engineering of NIR‐Absorbing Electron Acceptors , 2018, Advanced materials.

[29]  Fujun Zhang,et al.  Dithieno[3,2‐b:2′,3′‐d]pyrrol Fused Nonfullerene Acceptors Enabling Over 13% Efficiency for Organic Solar Cells , 2018, Advanced materials.

[30]  Frédéric Laquai,et al.  Impact of Nonfullerene Acceptor Core Structure on the Photophysics and Efficiency of Polymer Solar Cells , 2018 .

[31]  C. McNeill,et al.  An Alkylated Indacenodithieno[3,2‐b]thiophene‐Based Nonfullerene Acceptor with High Crystallinity Exhibiting Single Junction Solar Cell Efficiencies Greater than 13% with Low Voltage Losses , 2018, Advanced materials.

[32]  Ke Gao,et al.  Dithienopicenocarbazole-Based Acceptors for Efficient Organic Solar Cells with Optoelectronic Response Over 1000 nm and an Extremely Low Energy Loss. , 2018, Journal of the American Chemical Society.

[33]  W. Choy,et al.  Highly Efficient Ternary‐Blend Polymer Solar Cells Enabled by a Nonfullerene Acceptor and Two Polymer Donors with a Broad Composition Tolerance , 2017, Advanced materials.

[34]  Wei Zhang,et al.  9.0% power conversion efficiency from ternary all-polymer solar cells , 2017 .

[35]  H. Yao,et al.  Two Well‐Miscible Acceptors Work as One for Efficient Fullerene‐Free Organic Solar Cells , 2017, Advanced materials.

[36]  Yun Zhang,et al.  Molecular Optimization Enables over 13% Efficiency in Organic Solar Cells. , 2017, Journal of the American Chemical Society.

[37]  Runnan Yu,et al.  Design, Synthesis, and Photovoltaic Characterization of a Small Molecular Acceptor with an Ultra-Narrow Band Gap. , 2017, Angewandte Chemie.

[38]  C. J. M. Emmott,et al.  Reducing the efficiency-stability-cost gap of organic photovoltaics with highly efficient and stable small molecule acceptor ternary solar cells. , 2017, Nature materials.

[39]  F. Liu,et al.  Achieving High‐Performance Ternary Organic Solar Cells through Tuning Acceptor Alloy , 2017, Advanced materials.

[40]  J. Yao,et al.  High-Performance Solution-Processed Single-Junction Polymer Solar Cell Achievable by Post-Treatment of PEDOT:PSS Layer with Water-Containing Methanol. , 2017, ACS applied materials & interfaces.

[41]  Feng Gao,et al.  Fullerene‐Free Polymer Solar Cells with over 11% Efficiency and Excellent Thermal Stability , 2016, Advanced materials.

[42]  H. Ade,et al.  A Large‐Bandgap Conjugated Polymer for Versatile Photovoltaic Applications with High Performance , 2015, Advanced materials.

[43]  J. Yao,et al.  Comparative Study of Effects of Terminal Non‐Alkyl Aromatic and Alkyl Groups on Small‐Molecule Solar Cell Performance , 2015 .

[44]  J. Yao,et al.  Origin of effects of additive solvent on film-morphology in solution-processed nonfullerene solar cells. , 2015, ACS applied materials & interfaces.

[45]  Daoben Zhu,et al.  High-performance fullerene-free polymer solar cells with 6.31% efficiency , 2015 .

[46]  Daoben Zhu,et al.  An Electron Acceptor Challenging Fullerenes for Efficient Polymer Solar Cells , 2015, Advanced materials.

[47]  Qian Zhang,et al.  Solution-processed organic solar cells based on dialkylthiol-substituted benzodithiophene unit with efficiency near 10%. , 2014, Journal of the American Chemical Society.

[48]  Long Ye,et al.  Highly Efficient 2D-Conjugated Benzodithiophene-Based Photovoltaic Polymer with Linear Alkylthio Side Chain , 2014 .

[49]  Liang Yan,et al.  Tuning Fluorinated Benzotriazole Polymers through Alkylthio Substitution and Selenophene Incorporation for Bulk Heterojunction Solar Cells , 2014 .

[50]  Christoph J. Brabec,et al.  Organic Ternary Solar Cells: A Review , 2013, Advanced materials.

[51]  Jianhui Hou,et al.  Design, Application, and Morphology Study of a New Photovoltaic Polymer with Strong Aggregation in Solution State , 2012 .

[52]  Yongfang Li,et al.  High‐Performance Inverted Polymer Solar Cells with Solution‐Processed Titanium Chelate as Electron‐Collecting Layer on ITO Electrode , 2012, Advanced materials.

[53]  Christoph J. Brabec,et al.  Recombination and loss analysis in polythiophene based bulk heterojunction photodetectors , 2002 .