A versatile bioink for three-dimensional printing of cellular scaffolds based on thermally and photo-triggered tandem gelation.

Layer-by-layer bioprinting is a logical choice for the fabrication of stratified tissues like articular cartilage. Printing of viable organ replacements, however, is dependent on bioinks with appropriate rheological and cytocompatible properties. In cartilage engineering, photocrosslinkable glycosaminoglycan-based hydrogels are chondrogenic, but alone have generally poor printing properties. By blending the thermoresponsive polymer poly(N-isopropylacrylamide) grafted hyaluronan (HA-pNIPAAM) with methacrylated hyaluronan (HAMA), high-resolution scaffolds with good viability were printed. HA-pNIPAAM provided fast gelation and immediate post-printing structural fidelity, while HAMA ensured long-term mechanical stability upon photocrosslinking. The bioink was evaluated for rheological properties, swelling behavior, printability and biocompatibility of encapsulated bovine chondrocytes. Elution of HA-pNIPAAM from the scaffold was necessary to obtain good viability. HA-pNIPAAM can therefore be used to support extrusion of a range of biopolymers which undergo tandem gelation, thereby facilitating the printing of cell-laden, stratified cartilage constructs with zonally varying composition and stiffness.

[1]  R. Tuan,et al.  Technology Insight: adult stem cells in cartilage regeneration and tissue engineering , 2006, Nature Clinical Practice Rheumatology.

[2]  Shyni Varghese,et al.  Multifunctional chondroitin sulphate for cartilage tissue-biomaterial integration. , 2007, Nature materials.

[3]  Franz Hofmeister,et al.  Zur Lehre von der Wirkung der Salze , 1891, Archiv für experimentelle Pathologie und Pharmakologie.

[4]  I. Berkes,et al.  Clinical Experiences With Autologous Osteochondral Mosaicplasty in an Athletic Population , 2010, The American journal of sports medicine.

[5]  Guangdong Zhou,et al.  A novel method for the direct fabrication of growth factor-loaded microspheres within porous nondegradable hydrogels: controlled release for cartilage tissue engineering. , 2012, Journal of controlled release : official journal of the Controlled Release Society.

[6]  Marcy Zenobi-Wong,et al.  Printing thermoresponsive reverse molds for the creation of patterned two-component hydrogels for 3D cell culture. , 2013, Journal of visualized experiments : JoVE.

[7]  E. Hunziker,et al.  Development of mechanically stable alginate/chondrocyte constructs: effects of guluronic acid content and matrix synthesis , 2001, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[8]  S. Rodeo,et al.  Activity levels are higher after osteochondral autograft transfer mosaicplasty than after microfracture for articular cartilage defects of the knee: a retrospective comparative study. , 2012, The Journal of bone and joint surgery. American volume.

[9]  Jason A Burdick,et al.  Hydrogel design for cartilage tissue engineering: a case study with hyaluronic acid. , 2011, Biomaterials.

[10]  C. V. van Blitterswijk,et al.  Evaluation of photocrosslinked Lutrol hydrogel for tissue printing applications. , 2009, Biomacromolecules.

[11]  Wei Sun,et al.  Bioprinting endothelial cells with alginate for 3D tissue constructs. , 2009, Journal of biomechanical engineering.

[12]  T. Boland,et al.  Inkjet printing of viable mammalian cells. , 2005, Biomaterials.

[13]  M. Alini,et al.  Tailoring thermoreversible hyaluronan hydrogels by "click" chemistry and RAFT polymerization for cell and drug therapy. , 2010, Biomacromolecules.

[14]  S. Thibeault,et al.  The effect of mesenchymal stromal cell-hyaluronic acid hydrogel constructs on immunophenotype of macrophages. , 2011, Tissue engineering. Part A.

[15]  Dietmar W. Hutmacher,et al.  Long-term effects of hydrogel properties on human chondrocyte behavior , 2010 .

[16]  F. Miyawaki,et al.  Biological Evaluation of Tissue-Engineered Cartilage Using Thermoresponsive Poly(N-isopropylacrylamide)-Grafted Hyaluronan , 2012 .

[17]  M. Alini,et al.  Injectable thermoreversible hyaluronan-based hydrogels for nucleus pulposus cell encapsulation , 2012, European Spine Journal.

[18]  Ralph Müller,et al.  Tunable hydrogel composite with two-step processing in combination with innovative hardware upgrade for cell-based three-dimensional bioprinting. , 2014, Acta biomaterialia.

[19]  P. R. van Weeren,et al.  Gelatin-methacrylamide hydrogels as potential biomaterials for fabrication of tissue-engineered cartilage constructs. , 2013, Macromolecular bioscience.

[20]  M. Alini,et al.  Single step synthesis and characterization of thermoresponsive hyaluronan hydrogels. , 2012, Carbohydrate polymers.

[21]  Kristi S Anseth,et al.  Photoinitiated polymerization of PEG-diacrylate with lithium phenyl-2,4,6-trimethylbenzoylphosphinate: polymerization rate and cytocompatibility. , 2009, Biomaterials.

[22]  H. Rahier,et al.  Influence of additives on the thermoresponsive behavior of polymers in aqueous solution , 2005 .

[23]  Robert Langer,et al.  Controlled degradation and mechanical behavior of photopolymerized hyaluronic acid networks. , 2005, Biomacromolecules.

[24]  Adrian Neagu,et al.  Organ printing: fiction or science. , 2004, Biorheology.

[25]  T. Hirth,et al.  Chemical tailoring of gelatin to adjust its chemical and physical properties for functional bioprinting. , 2013, Journal of materials chemistry. B.

[26]  L. Trudeau,et al.  Chondroitin sulfate inhibits the nuclear translocation of nuclear factor-κB in interleukin-1β-stimulated chondrocytes , 2007 .

[27]  M. Zenobi‐Wong,et al.  Chondrocyte culture in three dimensional alginate sulfate hydrogels promotes proliferation while maintaining expression of chondrogenic markers. , 2014, Tissue engineering. Part A.

[28]  R. Larson.  The Structure and Rheology of Complex Fluids , 1998 .

[29]  E. Roos,et al.  Joint injury causes knee osteoarthritis in young adults , 2005, Current opinion in rheumatology.

[30]  Johnson H. Y. Chung,et al.  Bio-ink properties and printability for extrusion printing living cells. , 2013, Biomaterials science.

[31]  J. Burdick,et al.  Influence of three-dimensional hyaluronic acid microenvironments on mesenchymal stem cell chondrogenesis. , 2009, Tissue engineering. Part A.

[32]  Dietmar W. Hutmacher,et al.  A biomimetic extracellular matrix for cartilage tissue engineering centered on photocurable gelatin, hyaluronic acid and chondroitin sulfate. , 2014, Acta biomaterialia.

[33]  Rui L Reis,et al.  Macro/microporous silk fibroin scaffolds with potential for articular cartilage and meniscus tissue engineering applications. , 2012, Acta biomaterialia.

[34]  K. Donnelly,et al.  Construction of 3D biological matrices using rapid prototyping technology , 2009 .

[35]  J. Hubbell,et al.  Materials for Cell Encapsulation via a New Tandem Approach Combining Reverse Thermal Gelation and Covalent Crosslinking. , 2002 .

[36]  J. Buckwalter,et al.  Articular Cartilage and Osteoarthritis , 1954 .

[37]  M. Müller,et al.  GFOGER-modified MMP-sensitive polyethylene glycol hydrogels induce chondrogenic differentiation of human mesenchymal stem cells. , 2014, Tissue engineering. Part A.

[38]  M. Alini,et al.  Thermoreversible hyaluronan-based hydrogel supports in vitro and ex vivo disc-like differentiation of human mesenchymal stem cells. , 2013, The spine journal : official journal of the North American Spine Society.

[39]  T. Okinaga,et al.  Mechanisms involved in suppression of ADAMTS4 expression in synoviocytes by high molecular weight hyaluronic acid. , 2013, Biochemical and biophysical research communications.

[40]  C. Chillemi,et al.  Autologous chondrocyte implantation: cells phenotype and proliferation analysis , 2001, Knee Surgery, Sports Traumatology, Arthroscopy.

[41]  Yongnian Yan,et al.  Gradient Hydrogel Construct Based on an Improved Cell Assembling System , 2009 .

[42]  F. Ronca,et al.  Anti-inflammatory activity of chondroitin sulfate. , 1998, Osteoarthritis and cartilage.

[43]  J. Gorman,et al.  Influence of injectable hyaluronic acid hydrogel degradation behavior on infarction-induced ventricular remodeling. , 2011, Biomacromolecules.

[44]  P. Cremer,et al.  Specific ion effects on the water solubility of macromolecules: PNIPAM and the Hofmeister series. , 2005, Journal of the American Chemical Society.

[45]  Thomas Braschler,et al.  Microdrop Printing of Hydrogel Bioinks into 3D Tissue‐Like Geometries , 2012, Advanced materials.

[46]  E. Thonar,et al.  Phenotypic stability of bovine articular chondrocytes after long-term culture in alginate beads. , 1994, Journal of cell science.

[47]  P. du Souich,et al.  Anti-inflammatory activity of chondroitin sulfate. , 2008, Osteoarthritis and cartilage.

[48]  H. Yoo.  Photo-cross-linkable and thermo-responsive hydrogels containing chitosan and Pluronic for sustained release of human growth hormone (hGH) , 2007, Journal of biomaterials science. Polymer edition.

[49]  Wim E Hennink,et al.  In situ forming IPN hydrogels of calcium alginate and dextran-HEMA for biomedical applications. , 2011, Acta biomaterialia.

[50]  P. Dubruel,et al.  The 3D printing of gelatin methacrylamide cell-laden tissue-engineered constructs with high cell viability. , 2014, Biomaterials.

[51]  Oscar Chiantore,et al.  Solution properties of poly(N‐isopropylacrylamide) , 1979 .

[52]  Wim E Hennink,et al.  25th Anniversary Article: Engineering Hydrogels for Biofabrication , 2013, Advanced materials.

[53]  A. Rey-Rico,et al.  Transforming growth factor Beta-releasing scaffolds for cartilage tissue engineering. , 2014, Tissue engineering. Part B, Reviews.