Design and stress analysis of wheeled compactor construction

The article deals with the design of compactor for a backhoe loader for middle size excavators. Construction of compactor clamp was designed from heavy gauge sheets which will be welded. For expansion of penetrating into thickening soil there were segments designed on drum. From the point of fatigue during comparison of reached maximal tensions and comparison of these values for several loaded alternatives from Wohler curve was defined static safety factor. This work was supported by the Slovak Research and Development Agency under the contract No. APVV-14-0096 and by grant KEGA 015ŽU-4/2017 - Digital technologies for machine building study programs as a part of strategy "Internet of Things".

[1]  Jiří Podešva,et al.  Mechanics of Herbert Pendulum Hardness Tester and its Application , 2017 .

[2]  Marian Dudziak,et al.  Contact Problems between the Hub and the Shaft with a Four-Angular Shape of Cross-Section for Different Angular Positions , 2015 .

[3]  Gabriel Fedorko,et al.  Optimization of noisiness of mechanical system by using a pneumatic tuner during a failure of piston machine , 2017 .

[4]  Petra Kováčiková,et al.  Comparison of Numerical Analysis of Stress-Strain States of Cast Iron with Vermicular Graphite Shape and Globular Graphite Shape☆ , 2016 .

[5]  Alžbeta Sapietová,et al.  Dynamic Analysis of Rotating Machines in MSC.ADAMS , 2016 .

[6]  Pavol Božek,et al.  NUMERICAL ANALYSIS OF THE STRESS-STRAIN STATE OF A ROPE STRAND WITH LINEAR CONTACT UNDER TENSION AND TORSION LOADING CONDITIONS , 2017 .

[7]  P. Krawiec,et al.  Numerical Analysis of Geometrical Characteristics of Machine Elements Obtained with CMM Scanning , 2010 .

[8]  J. Johanson.  A Rolling Theory for Granular Solids , 1965 .

[9]  Gabriel Fedorko,et al.  Failure analysis of driveshaft of truck body caused by vibrations , 2017 .

[10]  Pavol Bozek,et al.  RELIABILITY DETERMINATION AND DIAGNOSTICS OF A MECHATRONIC SYSTEM , 2018, Advances in Science and Technology Research Journal.

[11]  Wiesława Piekarska,et al.  Issues in Numerical Modeling of Phase Transformations in Welded Joint , 2017 .

[12]  Jaroslav Homišin,et al.  Analysis of the impact of flexible couplings on gearbox vibrations , 2016 .

[13]  K. Bathe.  Finite Element Procedures , 1995 .

[14]  Józef Flizikowski,et al.  IMPLEMENTATION OF GENETIC ALGORITHMS INTO DEVELOPMENT OF MECHATRONIC MULTI-EDGE'S GRINDER DESIGN , 2011 .

[15]  Grzegorz Domek,et al.  The application of the optical system ATOS II for rapid prototyping methods of non-classical models of cogbelt pulleys , 2018 .