Numerical investigation of the performance of a hybrid battery thermal management system at high discharge rates

[1]  M. Shoukath Ali,et al.  Thermal management of Li-ion battery by using active and passive cooling method , 2023, Journal of Energy Storage.

[2]  Canbing Li,et al.  Research on the high thermal conductivity composite phase change materials with graphite nanosheets for battery thermal safety , 2023, Journal of Energy Storage.

[3]  M. Kiani,et al.  Experimental investigation of the innovated indirect-cooling system for Li-ion battery packs under fast charging and discharging , 2023, Journal of Energy Storage.

[4]  Jinsheng Xiao,et al.  Numerical analysis and thermal management of lithium-ion batteries under high ambient temperature and rapid discharging using composite phase change materials and counterflow liquid cooling , 2022, Applied Thermal Engineering.

[5]  O. Younis,et al.  Investigation of the use of extended surfaces in paraffin wax phase change material in thermal management of a cylindrical lithium-ion battery: Applicable in the aerospace industry , 2022, Journal of Energy Storage.

[6]  G. Murali,et al.  A review on hybrid thermal management of battery packs and it's cooling performance by enhanced PCM , 2021 .

[7]  Huaqiang Liu,et al.  A parametric study of a hybrid battery thermal management system that couples PCM/copper foam composite with helical liquid channel cooling , 2021 .

[8]  M. A. Tankari,et al.  Hybrid cooling based battery thermal management using composite phase change materials and forced convection , 2021 .

[9]  Weixiong Wu,et al.  Design and optimization of a hybrid battery thermal management system for electric vehicle based on surrogate model , 2021 .

[10]  Zhengguo Zhang,et al.  Battery thermal management based on multiscale encapsulated inorganic phase change material of high stability , 2021, Applied Thermal Engineering.

[11]  Guoqing Zhang,et al.  Experimental study of a novel strategy to construct the battery thermal management module by using tubular phase change material units , 2021, Journal of Energy Storage.

[12]  Ruijin Fan,et al.  Evaluation of fin intensified phase change material systems for thermal management of Li-ion battery modules , 2021 .

[13]  Yu-Kuen Fang,et al.  Structural optimization of light-weight battery module based on hybrid liquid cooling with high latent heat PCM , 2020 .

[14]  S. Panchal,et al.  Numerical analysis of different fin structures in phase change material module for battery thermal management system and its optimization , 2020 .

[15]  Paolo Cicconi,et al.  A support approach for the modular design of Li-ion batteries: A test case with PCM , 2020 .

[16]  Ji-zhen Liu,et al.  An innovative battery thermal management with thermally induced flexible phase change material , 2020 .

[17]  Rohit Bhagat,et al.  Air and PCM cooling for battery thermal management considering battery cycle life , 2020, Applied Thermal Engineering.

[18]  M. Siavashi,et al.  Battery thermal management with thermal energy storage composites of PCM, metal foam, fin and nanoparticle , 2020 .

[19]  Guoqing Zhang,et al.  Optimization of the internal fin in a phase-change-material module for battery thermal management , 2020 .

[20]  Mojtaba Safdari,et al.  Numerical investigation on PCM encapsulation shape used in the passive-active battery thermal management , 2020 .

[21]  Mengyao Lu,et al.  Research progress on power battery cooling technology for electric vehicles , 2020 .

[22]  Ruijin Fan,et al.  Thermal management of the lithium-ion battery by the composite PCM-Fin structures , 2019 .

[23]  Hengyun Zhang,et al.  Thermal performance of a cylindrical battery module impregnated with PCM composite based on thermoelectric cooling , 2019 .

[24]  Guoqing Zhang,et al.  Thermal performance of PCM and branch-structured fins for cylindrical power battery in a high-temperature environment , 2019, Energy Conversion and Management.

[25]  Rui Huang,et al.  Experimental and numerical study of PCM thermophysical parameters on lithium-ion battery thermal management , 2019 .

[26]  Jingwen Weng,et al.  Optimization of the detailed factors in a phase-change-material module for battery thermal management , 2019, International Journal of Heat and Mass Transfer.

[27]  Hengyun Zhang,et al.  Experimental investigation of thermal performance of large-sized battery module using hybrid PCM and bottom liquid cooling configuration , 2019, Applied Thermal Engineering.

[28]  Chun Yang,et al.  Thermal analysis of conjugated cooling configurations using phase change material and liquid cooling techniques for a battery module , 2019, International Journal of Heat and Mass Transfer.

[29]  M. Shojaeefard,et al.  Improving the performance of a passive battery thermal management system based on PCM using lateral fins , 2019, Heat and Mass Transfer.

[30]  Guoming Chen,et al.  Investigation on thermal management performance of PCM-fin structure for Li-ion battery module in high-temperature environment , 2018, Energy Conversion and Management.

[31]  Guoqing Zhang,et al.  Experimental investigation of the thermal performance of heat pipe assisted phase change material for battery thermal management system , 2018, Applied Thermal Engineering.

[32]  Deqiu Zou,et al.  Thermal performance enhancement of composite phase change materials (PCM) using graphene and carbon nanotubes as additives for the potential application in lithium-ion power battery , 2018 .

[33]  Md. Murshadul Hoque,et al.  State-of-the-Art and Energy Management System of Lithium-Ion Batteries in Electric Vehicle Applications: Issues and Recommendations , 2018, IEEE Access.

[34]  Qingsong Wang,et al.  Experimental study on the application of phase change material in the dynamic cycling of battery pack system , 2016 .

[35]  Qingsong Wang,et al.  Numerical study on the thermal performance of a composite board in battery thermal management system , 2016 .

[36]  Jiuchun Jiang,et al.  Comparison of different cooling methods for lithium ion battery cells , 2016 .

[37]  Gholamreza Karimi,et al.  Thermal management analysis of a Li-ion battery cell using phase change material loaded with carbon fibers , 2016 .

[38]  Jiateng Zhao,et al.  Thermal management of cylindrical power battery module for extending the life of new energy electric vehicles , 2015 .

[39]  Zhengguo Zhang,et al.  Experimental and numerical investigation of the application of phase change materials in a simulative power batteries thermal management system , 2014 .

[40]  Arun S. Mujumdar,et al.  Thermal–electrochemical model for passive thermal management of a spiral-wound lithium-ion battery , 2012 .

[41]  Zhonghao Rao,et al.  Simulation and experiment of thermal energy management with phase change material for ageing LiFePO4 power battery , 2011 .

[42]  J. Selman,et al.  Active (air-cooled) vs. passive (phase change material) thermal management of high power lithium-ion packs: Limitation of temperature rise and uniformity of temperature distribution , 2008 .

[43]  J. Selman,et al.  A novel thermal management system for electric vehicle batteries using phase-change material , 2000 .

[44]  Rijing Zhao,et al.  Heat transfer characteristics and influencing factors of immersion coupled direct cooling for battery thermal management , 2023, Journal of Energy Storage.

[45]  A. Suryan,et al.  Analysis of battery thermal management system for electric vehicles using 1- Tetradecanol phase change material , 2022, Sustainable Energy Technologies and Assessments.