Quantitative damage evaluation of composite materials with microwave thermographic technique: feasibility and new data analysis

In this work microwaves were used as heating source to quantitatively evaluate the extension of damaged areas in composite materials using the thermographic technique. In particular, microwave pulsed thermography was carried out on CFRP damaged specimens. A new procedure was developed to process thermographic data obtained by microwave thermography tests and a new algorithm was used to processing thermography data. The approach used to evaluate the damaged areas is based on the characteristic non-linear heating behaviour and an higher slope of heating and cooling curves respect to undamaged area. The results obtained with new procedure were compared with other NDT techniques such as X-ray and lock-in thermography. Numerical simulations were carried out in order to assess the potential sensitivity of the new procedure. The aim of this work is to develop a quick procedure and data analysis in order to allow the non destructive testing of composite large structures in automatic way with a reduced testing time.

[1]  Douglas C. Montgomery,et al.  Applied Statistics and Probability for Engineers, Third edition , 1994 .

[2]  Reza Zoughi,et al.  Microwave non-destructive testing and evaluation , 2000 .

[3]  Defer Didier,et al.  Comparison between Microwave Infrared Thermography and CO 2 Laser Infrared Thermography in Defect Detection in Applications with CFRP , 2013 .

[4]  Michel B. Lemistre,et al.  Mine detection using the EMIR ® method - Improved configuration using a mobile detection system , 2004 .

[5]  Xavier Maldague,et al.  Theory and Practice of Infrared Technology for Nondestructive Testing , 2001 .

[6]  T. S. Ramamurthy,et al.  Estimation of impact-induced damage in CFRP laminates through ultrasonic imaging , 1998 .

[7]  D. Szabra,et al.  Nondestructive evaluation of aircraft components by thermography using different heat sources , 2002 .

[8]  Branko Klarin,et al.  Thermal imaging and Thermoelastic Stress Analysis of impact damage of composite materials , 2011 .

[9]  M. Richardson,et al.  Review of low-velocity impact properties of composite materials , 1996 .

[10]  P. Venegas,et al.  Feature extraction and analysis for automatic characterization of impact damage in carbon fiber composites using active thermography , 2013 .

[11]  Carmine Pappalettere,et al.  Analisi Del Danneggiamento Su Componenti in Materiale Composito Con Tecnica Termoelastica , 2009 .

[12]  Manuel Almeida Valente,et al.  3D Electromagnetic Field Simulation in Microwave Ovens: a Tool to Control Thermal Runaway , 2010 .

[13]  Giovanni Maria Carlomagno,et al.  Impact damage in GFRP: New insights with infrared thermography , 2010 .

[14]  Sergio Oller,et al.  Impact damage identification in composite laminates using vibration testing , 2014 .

[15]  P. Stanley,et al.  Quantitative stress analysis by means of the thermoelastic effect , 1985 .

[16]  Phil E. Irving,et al.  Detection of impact damage in CFRP laminates by means of electrical potential techniques , 2007 .

[17]  Umberto Galietti,et al.  New data analysis to evaluate defects in composite materials using microwaves thermography , 2012 .

[18]  Antonino Squillace,et al.  Non-destructive control of industrial materials by means of lock-in thermography , 2002 .

[19]  C. Garnier,et al.  The detection of aeronautical defects in situ on composite structures using Non Destructive Testing , 2011 .

[20]  Darryl P Almond,et al.  A new technique to detect defect size and depth in composite structures using digital shearography and unconstrained optimization , 2012 .

[21]  P Stanley,et al.  Development and applications of thermoelastic stress analysis , 1998 .

[22]  Constantinos Soutis,et al.  Damage tolerance analysis of NCF composite sandwich panels , 2008 .