Impact of Morphological and Functional Features on Hospitals’ Energy Consumption: A Comparative Analysis of Six Case Studies

Due to their 24/7 operation and having to meet strict mandatory requirements for indoor air quality and sterility [1-3], hospitals are among the most energy-intensive facilities [4], thus significantly contributing to greenhouse gas emissions [5]. Even more alarming, however, is that while the steady evolution in healthcare delivery requires the continuous remodelling of the spaces in operative structures, involving both architecturaldistributive aspects and building plant systems – and therefore underlining the need of forecasting the changing hospital energy needs - energy analyses are still rarely based on departmental level, thus hospital energy consumption by space type remains largely unexplained. The objective of the work is the development and experimental validation of a numerical model for the annual energy consumption assessment of six hospitals located in the province of Bologna (Italy), in relation to the morphological features of the buildings and the characteristics of the envelope, the different medical functions, the typology, operating conditions and hours of the plant systems, the comfort needs of patient and healthcare staff, etc. Aimed at addressing the weaknesses of the studies available in literature, the methodological framework represents the main aspect of the work. The model was based on the identification of the energy needs and consumptions from micro (single spaces) to macro scale (macro-area) and was then tested for each healthcare facility through the exclusive use of measurement data. The numerical model enables to forecast the energy consumption variations and, what is the most important, the saving potential related to the renovation or layout modification of existing healthcare facilities, this analysing the impact of architectural and functional features, together with energy goals. Besides functional and morphological evaluations about the six case studies examined, this paper outlines the preliminary results of the work and reports in a parametric form the findings regarding the distribution of the conditioned floor area and of the external surface in relation to the type of spaces.

[1]  S. Pless,et al.  Technical Support Document: Development of the Advanced Energy Design Guide for Large Hospitals - 50% Energy Savings , 2013 .

[2]  Janusz Bujak,et al.  Heat consumption for preparing domestic hot water in hospitals , 2010 .

[3]  Alfredo Gimelli,et al.  Optimization criteria for cogeneration systems: Multi-objective approach and application in an hospital facility , 2013 .

[4]  Francesco Calise,et al.  Dynamic energy performance analysis: Case study for energy efficiency retrofits of hospital buildings , 2014 .

[5]  Tarald Rohde,et al.  Equipment and Energy Usage in a Large Teaching Hospital in Norway. , 2015, Journal of healthcare engineering.

[6]  Sophie Papst.  Advanced Building Simulation , 2016 .

[7]  William Tschudi,et al.  High Performance Healthcare Buildings: A Roadmap to Improved Energy Efficiency , 2010 .

[8]  Ahmet Teke,et al.  Assessing the energy efficiency improvement potentials of HVAC systems considering economic and environmental aspects at the hospitals , 2014 .

[9]  C A Short,et al.  Building resilience to overheating into 1960's UK hospital buildings within the constraint of the national carbon reduction target: Adaptive strategies , 2012 .

[10]  P. Torcellini,et al.  Technical Support Document: Development of the Advanced Energy Design Guide for Small Hospitals and Healthcare Facilities--30% Guide , 2010 .

[11]  Martin Kaltschmitt,et al.  Electrical energy consumption and utilization time analysis of hospital departments and large scale medical equipment , 2016 .

[12]  Pieter de Wilde,et al.  The gap between predicted and measured energy performance of buildings: A framework for investigation , 2014 .

[13]  Constantinos A. Balaras,et al.  HVAC and indoor thermal conditions in hospital operating rooms , 2007 .

[14]  Umberto Montanaro,et al.  Dynamic building energy performance analysis: A new adaptive control strategy for stringent thermohygrometric indoor air requirements , 2016 .

[15]  G. K. Alexis,et al.  A case study of a cogeneration system for a hospital in Greece. Economic and environmental impacts , 2013 .

[16]  Elias B. Kosmatopoulos,et al.  A roadmap towards intelligent net zero- and positive-energy buildings , 2011 .

[17]  Kevin J. Lomas,et al.  Resilience of naturally ventilated buildings to climate change: advanced natural ventilation and hospital wards , 2009 .

[18]  Denilson Boschiero do Espirito Santo,et al.  An energy and exergy analysis of a high-efficiency engine trigeneration system for a hospital: A case study methodology based on annual energy demand profiles , 2014 .

[19]  Martin Kaltschmitt,et al.  Electricity consumption of medical plug loads in hospital laboratories: Identification, evaluation, prediction and verification , 2015 .

[20]  Ruchi Choudhary,et al.  Energy analysis of the non-domestic building stock of Greater London , 2012 .

[21]  Giuseppe Peter Vanoli,et al.  Rehabilitation of the building envelope of hospitals: Achievable energy savings and microclimatic control on varying the HVAC systems in Mediterranean climates , 2013 .

[22]  Theocharis Tsoutsos,et al.  Design of a solar absorption cooling system in a Greek hospital , 2010 .

[23]  Tsuyoshi Murata,et al.  {m , 1934, ACML.

[24]  P. Torcellini,et al.  Large Hospital 50% Energy Savings: Technical Support Document , 2010 .

[25]  Sara Rainieri,et al.  Hospital CHCP system optimization assisted by TRNSYS building energy simulation tool , 2012 .

[26]  Gerardo Maria Mauro,et al.  Multi-stage and multi-objective optimization for energy retrofitting a developed hospital reference building: A new approach to assess cost-optimality , 2016 .

[27]  Christopher R. Iddon,et al.  The influence of hospital ward design on resilience to heat waves: An exploration using distributed lag models , 2015 .

[28]  Andrew D.F. Price,et al.  Performance evaluation of natural ventilation strategies for hospital wards A case study of Great Ormond Street Hospital , 2012 .

[29]  A. Wright,et al.  Benchmarking acute hospitals: Composite electricity targets based on departmental consumption intensities? , 2016 .

[30]  Bjarne W. Olesen,et al.  Sustainable Heating, Cooling and Ventilation of a Plus-Energy House via Photovoltaic/Thermal Panels , 2014 .

[31]  Velimir Čongradac,et al.  Methods for assessing energy savings in hospitals using various control techniques , 2014 .

[32]  J. Sherman,et al.  Environmental Impacts of the U.S. Health Care System and Effects on Public Health , 2016, PloS one.

[33]  Federico Silvestro,et al.  Electrical consumption forecasting in hospital facilities: An application case , 2015 .

[34]  Velimir Čongradac,et al.  Assessing the energy consumption for heating and cooling in hospitals , 2012 .

[35]  Dino Bouchlaghem,et al.  Predicted vs. actual energy performance of non-domestic buildings: Using post-occupancy evaluation data to reduce the performance gap , 2012 .

[36]  Kevin J. Lomas,et al.  Thermal comfort standards, measured internal temperatures and thermal resilience to climate change of free-running buildings: A case-study of hospital wards , 2012 .

[37]  Oscar Duque-Perez,et al.  A statistical modeling approach to detect anomalies in energetic efficiency of buildings , 2016 .

[38]  G. G. Stokes.  "J." , 1890, The New Yale Book of Quotations.

[39]  Yat Huang Yau,et al.  The application of heat pipe heat exchangers to improve the air quality and reduce the energy consumption of the air conditioning system in a hospital ward—A full year model simulation , 2011 .

[40]  Pedro J. Mago,et al.  Combined cooling, heating and power: A review of performance improvement and optimization , 2014 .