Modelling of Ag3Sn coarsening and its effect on creep of Sn-Ag eutectics

Abstract A new constitutive model, which can account for the solder's microstructure and its evolution, is proposed to describe the creep behaviour of the Sn–Ag eutectic phase. In this model, the threshold stress, being a function of the particle size, volume fraction and distribution of Ag 3 Sn intermetallic compound (IMC), is introduced to build the relationship between the creep behaviour of the Sn–Ag solder and its microstructure. Evolution of the eutectic phase's microstructure is accounted for in terms of the coarsening model. Both the creep strain rate and hydrostatic stress's influence are taken into account in the IMC coarsening model. The proposed model is implemented into the commercial finite element code ABAQUS. The creep deformation due to the applied stress and IMC coarsening are discussed in the case of a flip chip solder joint. The obtained results show that the shape of the solder joint influences the particle distribution caused by heterogeneous coarsening. The solder joint is softened due to microstructure evolution over a long range of time.

[1]  Thomas R. Bieler,et al.  Characterization of microstructure and crystal orientation of the tin phase in single shear lap Sn-3.5Ag solder joint specimens , 2005 .

[2]  Mgd Marc Geers,et al.  Fatigue damage modeling in solder interconnects using a cohesive zone approach , 2005 .

[3]  H. Conrad,et al.  Microstructure coarsening during static annealing of 60Sn40Pb solder joints: III intermetallic compound growth kientics , 2001 .

[4]  M. Abtew,et al.  Lead-free Solders in Microelectronics , 2000 .

[5]  Hans Conrad,et al.  Microstructure coarsening during static annealing of 60Sn40Pb solder joints: I stereology , 2001 .

[6]  B. Reppich.  On the attractive particle–dislocation interaction in dispersion-strengthened material , 1998 .

[7]  E. Arzt,et al.  The kinetics of dislocation climb over hard particles—I. Climb without attractive particle-dislocation interaction , 1988 .

[8]  Paul T. Vianco,et al.  Coarsening of the Sn-Pb solder microstructure in constitutive model-based predictions of solder joint thermal mechanical fatigue , 1999 .

[9]  Chi‐Man Lawrence Wu,et al.  Properties of lead-free solder alloys with rare earth element additions , 2004 .

[10]  R. Vinci,et al.  Microstructural evolution in lead-free solder alloys: Part I. Cast Sn–Ag–Cu eutectic , 2004 .

[11]  E. Arzt,et al.  TEM investigations of the superdislocations and their interaction with particles in dispersion strengthened intermetallics , 1999 .

[12]  I. Dutta,et al.  Impression creep characterization of rapidly cooled Sn–3.5Ag solders , 2004 .

[13]  Nikhilesh Chawla,et al.  Effects of cooling rate on creep behavior of a Sn-3.5Ag alloy , 2004 .

[14]  I. Lifshitz,et al.  The kinetics of precipitation from supersaturated solid solutions , 1961 .

[15]  H. E. Fang,et al.  Failure Analysis of Miniature Solder Specimen , 2001, Packaging, Reliability and Manufacturing Issues Associated With Electronic and Photonic Products.

[16]  N. Chawla,et al.  Creep deformation behavior of Sn–3.5Ag solder/Cu couple at small length scales , 2004 .

[17]  Y. Mutoh,et al.  Effect of temperature on isothermal low cycle fatigue properties of Sn-Ag eutectic solder , 2004 .

[18]  H. Conrad,et al.  Microstructure coarsening during static annealing of 60Sn40Pb solder joints: II eutectic coarsening kinetics , 2001 .

[19]  Nikhilesh Chawla,et al.  Effects of cooling rate on the microstructure and tensile behavior of a Sn-3.5wt.%Ag solder , 2003 .

[20]  M. A Clark,et al.  Deformation enhanced grain growth in a superplastic Sn-1% Bi alloy , 1973 .

[21]  John H. L. Pang,et al.  Thermal cycling aging effects on Sn–Ag–Cu solder joint microstructure, IMC and strength , 2004 .

[22]  S. Choi,et al.  Orientation imaging studies of Sn-based electronic solder joints , 2002 .

[23]  I. Dutta.  A constitutive model for creep of lead-free solders undergoing strain-enhanced microstructural coarsening: A first report , 2003 .

[24]  Y. Mutoh,et al.  Temperature effect on low cycle fatigue behavior of Sn–Pb eutectic solder , 2004 .

[25]  Qingda Yang,et al.  A cohesive zone model for low cycle fatigue life prediction of solder joints , 2004 .