Light mobile robot’s weight design and research

Light mobile robotpsilas weight design is a important problem which decides function and ability of mobile robot. In this paper, a total design method is advanced. There are many factors to consider, include mechanical part, electrical part, and task part. Each parts of robot must be carefully calculated and designed. There are many experiences in it. A light mobile robot is carefully analyzed as an example. The method can help mobile robot designers on how to design a robotpsilas weight quickly and not waste time and money.

[1]  Daniel E. Koditschek,et al.  A leg configuration measurement system for full-body pose estimates in a hexapod robot , 2005, IEEE Transactions on Robotics.

[2]  Miomir Vukobratovic,et al.  Contribution to the integrated control synthesis of road vehicles , 1999, IEEE Trans. Control. Syst. Technol..

[3]  Gianluca Antonelli,et al.  Kinematic Control of Platoons of Autonomous Vehicles , 2006, IEEE Transactions on Robotics.

[4]  Christian Laugier,et al.  Sensor-based control architecture for a car-like vehicle , 1998, Proceedings. 1998 IEEE/RSJ International Conference on Intelligent Robots and Systems. Innovations in Theory, Practice and Applications (Cat. No.98CH36190).

[5]  Rafael Murrieta-Cid,et al.  Optimal Paths for Landmark-Based Navigation by Differential-Drive Vehicles With Field-of-View Constraints , 2007, IEEE Transactions on Robotics.

[6]  Gautam Biswas,et al.  Distributed Diagnosis in Formations of Mobile Robots , 2007, IEEE Transactions on Robotics.

[7]  Giuseppe Oriolo,et al.  Image-Based Visual Servoing for Nonholonomic Mobile Robots Using Epipolar Geometry , 2007, IEEE Transactions on Robotics.

[8]  John Hallam,et al.  IEEE International Joint Conference on Neural Networks , 2005 .

[9]  M. Ji,et al.  Supervisory Fault Adaptive Control of a Mobile Robot and Its Application in Sensor-Fault Accommodation , 2007, IEEE Transactions on Robotics.