Application of the sol-gel technique to develop synthetic calcium-based sorbents with excellent carbon dioxide capture characteristics.

An option for reducing the release of greenhouse gases into the atmosphere is the implementation of CO(2) capture and storage (CCS) technologies. However, the costs associated with capturing CO(2) by using the currently available technology of amine scrubbing are very high. An emerging second-generation CO(2) capture technology is the use of calcium-based sorbents, which exploit the carbonation and calcination reactions of CaO, namely, CaO+CO(2) ↔CaCO(3). Naturally occurring Ca-based sorbents are inexpensive, but show a very rapid decay of CO(2) uptake capacity with cycle number. Here, we report the development of synthetic Ca-based CO(2) sorbents using a sol-gel technique. Using this technique, we are able to synthesize a nanostructured material that possesses a high surface area and pore volume and shows excellent CO(2) capture characteristics over many cycles. Furthermore, we are able to establish a clear relationship between the structure of the sorbent and its performance. After 30 cycles of calcination and carbonation, the best material possessed a CO(2) uptake capacity of 0.51 g of CO(2) per gram of sorbent; a value that is about 250 % higher than that for naturally occurring Havelock limestone.

[1]  P. Fennell,et al.  Reactivation of a CaO-based sorbent for CO2 capture from stationary sources , 2011 .

[2]  H. Herzog.  Peer Reviewed: What Future for Carbon Capture and Sequestration? , 2001 .

[3]  Vasilije Manovic,et al.  Thermal activation of CaO-based sorbent and self-reactivation during CO2 capture looping cycles. , 2008, Environmental science & technology.

[4]  Vasilije Manovic,et al.  Steam reactivation of spent CaO-based sorbent for multiple CO2 capture cycles. , 2007, Environmental science & technology.

[5]  Roberta Pacciani,et al.  Investigation of the Enhanced Water Gas Shift Reaction Using Natural and Synthetic Sorbents for the Capture of CO2 , 2009 .

[6]  C. Müller,et al.  Synthetic Ca‐based solid sorbents suitable for capturing CO2 in a fluidized bed , 2008 .

[7]  E. Barrett,et al.  (CONTRIBUTION FROM THE MULTIPLE FELLOWSHIP OF BAUGH AND SONS COMPANY, MELLOX INSTITUTE) The Determination of Pore Volume and Area Distributions in Porous Substances. I. Computations from Nitrogen Isotherms , 1951 .

[8]  J. Carlos Abanades,et al.  CO2 Capture Capacity of CaO in Long Series of Carbonation/Calcination Cycles , 2006 .

[9]  M. Vallet‐Regí,et al.  Synthesis Routes for Bioactive Sol−Gel Glasses: Alkoxides versus Nitrates , 2002 .

[10]  M. Broda,et al.  Highly efficient CO2 sorbents: development of synthetic, calcium-rich dolomites. , 2012, Environmental science & technology.

[11]  Zimin Nie,et al.  Magnesia-stabilized calcium oxide absorbents with improved durability for high temperature CO{sub 2} capture , 2009 .

[12]  C. Müller,et al.  How does the concentration of CO2 affect its uptake by a synthetic Ca‐based solid sorbent? , 2008 .

[13]  John F. Davidson,et al.  The Effects of Repeated Cycles of Calcination and Carbonation on a Variety of Different Limestones, as Measured in a Hot Fluidized Bed of Sand , 2007 .

[14]  Pen-Chi Chiang,et al.  Development of high-temperature CO2 sorbents made of CaO-based mesoporous silica , 2010 .

[15]  E. Teller,et al.  ADSORPTION OF GASES IN MULTIMOLECULAR LAYERS , 1938 .

[16]  Xiaoping Chen,et al.  Cyclic CO2 capture behavior of KMnO4-doped CaO-based sorbent , 2010 .

[17]  Vasilije Manovic,et al.  CO2 Carrying Behavior of Calcium Aluminate Pellets under High-Temperature/ High-CO2 Concentration Calcination Conditions , 2010 .

[18]  C. Zheng,et al.  SGCS-made ultrafine CaO/Al2O3 sorbent for cyclic CO2 capture , 2011 .

[19]  Choong-Gon Lee,et al.  CO2 sorption and desorption efficiency of Ca2SiO4 , 2008 .

[20]  Vasilije Manovic,et al.  Reactivation and remaking of calcium aluminate pellets for CO2 capture , 2011 .

[21]  C. Müller,et al.  Capture of CO2 Using Sorbents of Calcium Magnesium Acetate (CMA) , 2010 .

[22]  Juan Carlos Abanades,et al.  Economics of CO2 Capture Using the Calcium Cycle with a Pressurized Fluidized Bed Combustor , 2007 .

[23]  Single-stage production of highly concentrated hydrogen from biomass-derived syngas. , 2010, ChemSusChem.

[24]  Christopher W. Jones,et al.  Adsorbent materials for carbon dioxide capture from large anthropogenic point sources. , 2009, ChemSusChem.

[25]  Yu-yu Huang,et al.  Effect of Preparation Temperature on Cyclic CO2 Capture and Multiple Carbonation−Calcination Cycles for a New Ca-Based CO2 Sorbent , 2006 .

[26]  Andrew T. Harris,et al.  Reactivity of CaO derived from nano-sized CaCO3 particles through multiple CO2 capture-and-release cycles , 2009 .

[27]  John R. Grace,et al.  Long-Term Calcination/Carbonation Cycling and Thermal Pretreatment for CO2 Capture by Limestone and Dolomite , 2009 .

[28]  P. Smirniotis,et al.  High-Temperature Sorbents for CO2 Made of Alkali Metals Doped on CaO Supports , 2004 .

[29]  J. Khinast,et al.  Reaction of Ca(OH)2 with SO2 at Low Temperature , 1997 .

[30]  Ningsheng Cai,et al.  Synthesis, experimental studies, and analysis of a new calcium-based carbon dioxide absorbent , 2005 .

[31]  Shin-Min Shih,et al.  Calcium hydroxide/fly ash sorbents for sulfur dioxide removal , 1992 .

[32]  Yan Liu,et al.  The effect of trivalent cations on the performance of Mg-M-CO(3) layered double hydroxides for high-temperature CO(2) capture. , 2010, ChemSusChem.

[33]  Paul S. Fennell,et al.  The calcium looping cycle for large-scale CO2 capture , 2010 .