Fuel Cells Catalyst for Start-Up and Shutdown Conditions: Electrochemical, XPS, and STEM Evaluation of Sputter-Deposited Ru, Ir, and Ti on Pt-Coated Nanostructured Thin Film Supports

[1]  Toshihiko Yoshida,et al.  Membrane and Catalyst Performance Targets for Automotive Fuel Cells by FCCJ Membrane, Catalyst, MEA WG , 2011 .

[2]  Hartmut Fuess,et al.  Dissolution and Migration of Platinum in PEMFCs Investigated for Start/Stop Cycling and High Potential Degradation , 2011 .

[3]  K. Neyerlin,et al.  Bimetallic Ru Electrocatalysts for the OER and Electrolytic Water Splitting in Acidic Media , 2010 .

[4]  Robyn D. Warner,et al.  XPS, AES, and Electrochemical Study of Iridium Oxide Coating Materials for Cardiovascular Stent Application , 2009 .

[5]  Jürgen Garche,et al.  Encyclopedia of electrochemical power sources , 2009 .

[6]  U. Schnakenberg,et al.  Performance of laboratory polymer electrolyte membrane hydrogen generator with sputtered iridium oxide anode , 2008 .

[7]  S. Bliznakov,et al.  Sputtered iridium oxide films as electrocatalysts for water splitting via PEM electrolysis , 2007 .

[8]  Deposition of sputtered iridium oxide—Influence of oxygen flow in the reactor on the film properties , 2006 .

[9]  Mark K. Debe,et al.  High voltage stability of nanostructured thin film catalysts for PEM fuel cells , 2006 .

[10]  R. Borup,et al.  Identifying Contributing Degradation Phenomena in PEM Fuel Cell Membrane Electride Assemblies Via Electron Microscopy , 2006 .

[11]  Mark K. Debe,et al.  Durability Aspects of Nanostructured Thin Film Catalysts for PEM Fuel Cells , 2006 .

[12]  L. J. Bregoli,et al.  A Reverse-Current Decay Mechanism for Fuel Cells , 2005 .

[13]  Hubert A. Gasteiger,et al.  Handbook of fuel cells : fundamentals technology and applications , 2003 .

[14]  S. Trasatti.  Physical electrochemistry of ceramic oxides , 2010 .

[15]  W. O'grady,et al.  Single crystal RuO2/Ti and RuO2/TiO2 interface: LEED, Auger and XPS study , 1990 .

[16]  S. Trasatti,et al.  XPS and AES study of mixed layers of RuO2 and IrO2 , 1990 .

[17]  C. Angelinetta,et al.  Effect of preparation on the surface and electrocatalytic properties of RuO2 + IrO2 mixed oxide electrodes , 1989 .

[18]  W. O'grady,et al.  The surface structure of RuO2: A leed, auger and XPS study of the (110) and (100) faces , 1988 .

[19]  H. Meyer,et al.  Semiconductor/polyimide interface formation: An x-ray photoelectron spectroscopy study of germanium chemical bonding , 1988 .

[20]  H. Meyer,et al.  Aluminum/polyimide interface formation: An x‐ray photoelectron spectroscopy study of selective chemical bonding , 1987 .

[21]  C. Angelinetta,et al.  Surface properties of RuO2 + IrO2 mixed oxide electrodes , 1986 .