Application of Virtual Surgical Planning with Computer Assisted Design and Manufacturing Technology to Cranio-Maxillofacial Surgery

Computer aided design and manufacturing (CAD/CAM) technology today is the standard in manufacturing industry. The application of the CAD/CAM technology, together with the emerging 3D medical images based virtual surgical planning (VSP) technology, to craniomaxillofacial reconstruction has been gaining increasing attention to reconstructive surgeons. This article illustrates the components, system and clinical management of the VSP and CAD/CAM technology including: data acquisition, virtual surgical and treatment planning, individual implant design and fabrication, and outcome assessment. It focuses primarily on the technical aspects of the VSP and CAD/CAM system to improve the predictability of the planning and outcome.

[1]  R. Kikinis,et al.  Computer‐Assisted Three‐Dimensional Planning in Craniofacial Surgery , 1993, Plastic and reconstructive surgery.

[2]  Christopher Lane,et al.  Completing the 3-dimensional picture. , 2008, American journal of orthodontics and dentofacial orthopedics : official publication of the American Association of Orthodontists, its constituent societies, and the American Board of Orthodontics.

[3]  Beat Hammer,et al.  Manufacturing splints for orthognathic surgery using a three-dimensional printer. , 2008, Oral surgery, oral medicine, oral pathology, oral radiology, and endodontics.

[4]  M W Vannier,et al.  Quantitative analysis of spiral computed tomography for craniofacial clinical applications. , 1998, Dento maxillo facial radiology.

[5]  Simon Wildermuth,et al.  A survey of interactive mesh-cutting techniques and a new method for implementing generalized interactive mesh cutting using virtual tools , 2002, Comput. Animat. Virtual Worlds.

[6]  J. Ambrose,et al.  Computerized transverse axial scanning (tomography): Part 2. Clinical application* , 1973 .

[7]  J. Ambrose,et al.  Computerized transverse axial scanning (tomography). 2. Clinical application. , 1973, The British journal of radiology.

[8]  I. Churchill-Davidson,et al.  Oxygenation in radiotherapy. II. Clinical application. , 1957, The British journal of radiology.

[9]  M W Vannier,et al.  Three-dimensional measurement accuracy of skull surface landmarks. , 1988, American journal of physical anthropology.

[10]  A. Johal,et al.  Orthodontic measurements on digital study models compared with plaster models: a systematic review. , 2011, Orthodontics & craniofacial research.

[11]  Stefan Zachow,et al.  Three-Dimensional Osteotomy Planning in Maxillofacial Surgery Including Soft Tissue Prediction , 2005, The Journal of craniofacial surgery.

[12]  R. W. Günther,et al.  Pediatric craniofacial surgery: Comparison of milling and stereolithography for 3D model manufacturing , 2005, Pediatric Radiology.

[13]  A D Linney,et al.  Computer-generated titanium cranioplasty: report of a new technique for repairing skull defects. , 1992, British journal of neurosurgery.

[14]  W. Binder,et al.  Reconstruction of Posttraumatic and Congenital Facial Deformities with Three‐Dimensional Computer‐Assisted Custom‐Designed Implants , 1994, Plastic and reconstructive surgery.

[15]  H. Imhof,et al.  Precision of three-dimensional CT-assisted model production in the maxillofacial area , 1992, European Radiology.

[16]  G. Hounsfield Computerized transverse axial scanning (tomography): Part I. Description of system. 1973. , 1973, The British journal of radiology.

[17]  J. Antunes,et al.  3-D volume rendering maxillofacial analysis of angular measurements by multislice CT. , 2008, Oral surgery, oral medicine, oral pathology, oral radiology, and endodontics.

[18]  M W Vannier,et al.  Craniofacial measurements based on 3D-CT volume rendering: implications for clinical applications. , 2004, Dento maxillo facial radiology.

[19]  Jaime Gateno,et al.  Three-dimensional computer-aided surgical simulation for maxillofacial surgery. , 2005, Atlas of the oral and maxillofacial surgery clinics of North America.

[20]  T. Ohmura,et al.  Reconstruction of a cranial bone defect with hydroxyapatite and free flap transfer. , 1997, The Journal of craniofacial surgery.

[21]  L Heuser,et al.  Prefabricated prostheses for the reconstruction of skull defects. , 1995, International journal of oral and maxillofacial surgery.

[22]  J. Bradrick,et al.  Craniofacial computer-assisted surgical planning and simulation , 1995 .

[23]  Evgeny Gladilin,et al.  Draw and cut: intuitive 3D osteotomy planning on polygonal bone models , 2003, CARS.

[24]  H. Wong,et al.  Quantitative measurement on three-dimensional computed tomography: an experimental validation using phantom objects. , 2000, Chang Gung medical journal.

[25]  M. Vannier,et al.  Craniofacial computer-assisted surgical planning and simulation. , 1994, Clinics in plastic surgery.

[26]  P Dev,et al.  Three-dimensional imaging of bone from computerized tomography. , 1986, Clinical orthopaedics and related research.

[27]  Chee Kai Chua,et al.  An integrated experimental approach to link a laser digitiser, a CAD/CAM system and a rapid prototyping system for biomedical applications , 1998 .

[28]  W Lill,et al.  Reproducibility of three-dimensional CT-assisted model production in the maxillofacial area. , 1992, The British journal of oral & maxillofacial surgery.

[29]  L. Will,et al.  Accuracy and reliability of linear cephalometric measurements from cone-beam computed tomography scans of a dry human skull. , 2009, American journal of orthodontics and dentofacial orthopedics : official publication of the American Association of Orthodontists, its constituent societies, and the American Board of Orthodontics.

[30]  G. Hounsfield Computerized transverse axial scanning (tomography). 1. Description of system. , 1973, The British journal of radiology.

[31]  C. N. McEwan,et al.  Three-dimensional imaging in craniofacial surgery: a review of the role of mirror image production , 1990, European Journal of Plastic Surgery.

[32]  M W Vannier,et al.  Validation study of skull three-dimensional computerized tomography measurements. , 1990, American journal of physical anthropology.

[33]  A. Harders,et al.  Reconstruction of craniofacial bone defects with individual alloplastic implants based on CAD/CAM-manipulated CT-data. , 1995, Journal of cranio-maxillo-facial surgery : official publication of the European Association for Cranio-Maxillo-Facial Surgery.

[34]  Richard A. Robb,et al.  Biomedical Imaging, Visualization, and Analysis , 1999 .

[35]  A. Amis,et al.  Rapid prototyping techniques for anatomical modelling in medicine. , 1997, Annals of the Royal College of Surgeons of England.

[36]  H F Sailer,et al.  The value of stereolithographic models for preoperative diagnosis of craniofacial deformities and planning of surgical corrections. , 1998, International journal of oral and maxillofacial surgery.

[37]  M W Vannier,et al.  Three dimensional CT reconstruction images for craniofacial surgical planning and evaluation. , 1984, Radiology.

[38]  H Eufinger,et al.  CAD by processing of computed tomography data and CAM of individually designed prostheses. , 1995, International journal of oral and maxillofacial surgery.

[39]  G. Santler,et al.  Indications and limitations of three-dimensional models in cranio-maxillofacial surgery. , 1998, Journal of cranio-maxillo-facial surgery : official publication of the European Association for Cranio-Maxillo-Facial Surgery.

[40]  B. Toth,et al.  Computer‐Designed Prostheses for Orbitocranial Reconstruction , 1988, Plastic and reconstructive surgery.

[41]  M. Sales,et al.  Assessment of linear and angular measurements on three-dimensional cone-beam computed tomographic images. , 2009, Oral surgery, oral medicine, oral pathology, oral radiology, and endodontics.