Finite-Element and Residual Stress Analysis of Self-Pierce Riveting in Dissimilar Metal Sheets

[1]  J. Ni,et al.  Thermal Mechanical Modeling of the Plunge Stage During Friction-Stir Welding of Dissimilar Al 6061 to TRIP 780 Steel , 2015 .

[2]  Robert Cacko.  Review of different material separation criteria in numerical modeling of the self-piercing riveting process – SPR , 2008 .

[3]  Douglas J. Bammann,et al.  Modeling Temperature and Strain Rate Dependent Large Deformations of Metals , 1990 .

[4]  D. Sediako,et al.  Analysis of Residual Stress Profiles in the Cylinder Web Region of an As-Cast V6 Al Engine Block with Cast-In Fe Liners Using Neutron Diffraction , 2011 .

[5]  Zhou Yang,et al.  Effect of Rivet Hardness and Geometrical Features on Friction Self-Piercing Riveted Joint Quality , 2015 .

[6]  P. Dawson,et al.  Quantifying Three-Dimensional Residual Stress Distributions Using Spatially-Resolved Diffraction Measurements and Finite Element Based Data Reduction , 2013 .

[7]  X. Su,et al.  Finite Element Modeling of Dissimilar Metal Self-Piercing Riveting Process , 2014 .

[8]  Durul Ulutan,et al.  Effect of Thermal Assistance on the Joint Quality of Al6063-T5A During Flow Drill Screwdriving , 2015 .

[9]  C. Qiu,et al.  Strength and Phase Identification of Autogenous Laser Brazed Dissimilar Metal Microjoints , 2015 .

[10]  M. Langseth,et al.  Self-piercing riveting process: An experimental and numerical investigation , 2006 .

[11]  D. Bammann,et al.  Finite Element Analysis of Self-Pierce Riveting in Magnesium Alloys Sheets , 2015 .

[12]  J. H. Hollomon,et al.  Effect of Strain Rate Upon Plastic Flow of Steel , 1944 .

[13]  Kiran Solanki,et al.  Quantifying residual stresses in resistance spot welding of 6061-T6 aluminum alloy sheets via neutron diffraction measurements , 2012 .

[14]  Stuart Edmund Blacket,et al.  Laser assisted self-pierce riveting of AZ31 magnesium alloy strips , 2010 .

[15]  G. R. Johnson,et al.  Evaluation of cylinder‐impact test data for constitutive model constants , 1988 .

[16]  M. Langseth,et al.  Self-piercing riveting connections using aluminium rivets , 2010 .

[17]  M. F. Ashby,et al.  On creep fracture by void growth , 1982 .

[18]  Jwo Pan,et al.  Residual Stresses Due to Rigid Cylinder Indentation and Rolling at a Very High Rolling Load , 2015 .

[19]  Andrzej Skorupa,et al.  Riveted Lap Joints in Aircraft Fuselage , 2012 .

[20]  M. Horstemeyer,et al.  Application of the Bammann inelasticity internal state variable constitutive model to geological materials , 2011 .

[21]  Pei-Chung Wang,et al.  Self-Piercing Riveting of Wrought Magnesium AZ31 Sheets , 2011 .

[22]  J. Min,et al.  Friction Stir Blind Riveting for Joining Dissimilar Cast Mg AM60 and Al Alloy Sheets , 2015 .

[23]  A. Levers,et al.  Numerical and Experimental Investigation of Aircraft Panel Deformation During Riveting Process , 2015 .

[24]  John H. Beynon,et al.  Feasibility of measuring residual stress profile in different self-pierce riveted joints , 2012 .

[25]  D. Matlock,et al.  Assessment of the Strain-Rate Dependent Tensile Properties of Automotive Sheet Steels , 2004 .

[26]  Philip J. Withers,et al.  Recent advances in residual stress measurement , 2008 .

[27]  K. Chandrashekhara,et al.  Stresses in a thick plate with a circular hole under axisymmetric loading , 1977 .

[28]  Elias C. Aifantis,et al.  A damage model for ductile metals , 1989 .

[29]  G. Casalino,et al.  On the numerical modelling of the multiphysics self piercing riveting process based on the finite element technique , 2008, Adv. Eng. Softw..