Hardened raceway calculation analysis of a three-row roller slewing bearing

Abstract Three-row roller slewing bearings are large and often exposed to quite complex loads. The raceway surface is hardened to improve its carrying capacity. An inadequate hardened raceway depth can cause the raceway to be crushed. In contrast, an excessively large hardened raceway depth can increase the overall vibration, processing difficulty, and cost. Thus, it is critical to determine the optimal hardening depth. We propose a quick method to analyze this depth. The use of non-linear springs instead of a solid roller provides the maximum contact load between the roller and raceway according to the actual load conditions. A finite element model for the local roller and raceway contact is established. The depth thickness under the raceway is divided into a hardened layer, a transition layer, and a core layer. Each layer has distinct elastic–plastic material parameters. The results of a roller and raceway compression experiment validate the roller and raceway finite element model. The accuracy of the raceway as described by the model with different layers is verified by an indentation test of heat-treated 42CrMo. The results show the following: 1) both the value and depth position of the maximum stress increase under normal loads, and 2) the choice of algorithm has a strong influence on the calculated value of the fatigue life.

[1]  A. Palmgren,et al.  Dynamic capacity of rolling bearings , 1947 .

[2]  Srečko Glodež,et al.  Numerical Analysis of 3D Subsurface Crack Propagation in Large Slewing Bearing , 2013, CP 2013.

[3]  Eugeniusz Rusiński,et al.  Superelement-based modeling of load distribution in large-size slewing bearings , 2007 .

[4]  Srečko Glodež,et al.  Computational model for calculation of static capacity and lifetime of large slewing bearing's raceway , 2012 .

[5]  Marek Krynke,et al.  A catalogue capacity of slewing bearings , 2012 .

[6]  P. K. Pearson,et al.  Fatigue and Fracture Mechanisms in Large Rolling Element Bearings , 2001 .

[7]  Alberto Serna,et al.  Design of Four Contact-Point Slewing Bearing With a New Load Distribution Procedure to Account for Structural Stiffness , 2010 .

[8]  S. Zupan,et al.  Carrying angle and carrying capacity of a large single row ball bearing as a function of geometry parameters of the rolling contact and the supporting structure stiffness , 2001 .

[9]  Srečko Glodež,et al.  Computational assessment of the allowable static contact loading of a roller-slewing bearing׳s case-hardened raceway , 2015 .

[10]  Josu Aguirrebeitia,et al.  Theoretical calculation of general static load-carrying capacity for the design and selection of three row roller slewing bearings , 2012 .

[11]  Jonas W. Ringsberg,et al.  Assessment of conditions for initiation of cracks in the heads of railway rails due to rolling contact fatigue , 1999 .

[12]  Ruben Lostado,et al.  Optimization of operating conditions for a double-row tapered roller bearing , 2016 .

[13]  W. H. Williams,et al.  Probability Theory and Mathematical Statistics , 1964 .

[14]  Moo Young Huh,et al.  Development of the profile ring rolling process for large slewing rings of alloy steels , 2007 .

[15]  T. A. Harris,et al.  A New Fatigue Life Model for Rolling Bearings , 1985 .

[16]  L. Kania,et al.  Modelling of rollers in calculation of slewing bearing with the use of finite elements , 2006 .

[17]  Herbert S. Cheng,et al.  Micromechanics Modeling of Crack Initiation Under Contact Fatigue , 1994 .

[18]  Srečko Glodež,et al.  Fatigue analysis of large slewing bearing using strain-life approach , 2013 .

[19]  C. P. Butterfield,et al.  Wind Turbine Design Guideline DG03: Yaw and Pitch Rolling Bearing Life , 2009 .

[20]  Sanjay H Upadhyay,et al.  Theoretical model to predict the effect of localized defect on dynamic behavior of cylindrical roller bearing at inner race and outer race , 2014 .

[21]  R. Fougères,et al.  Role of inclusions, surface roughness and operating conditions on rolling contact fatigue , 1999 .

[22]  Michael L. Bauccio,et al.  ASM Metals Reference Book , 1993 .

[23]  Roberto Fernandez Martinez,et al.  Determination of the contact stresses in double-row tapered roller bearings using the finite element method, experimental analysis and analytical models , 2015 .

[24]  Ivan Prebil,et al.  Verification of numerical determination of carrying capacity of large rolling bearings with hardened raceway , 2007 .

[25]  Guanci Chen,et al.  Effects of size and raceway hardness on the fatigue life of large rolling bearing , 2015 .

[26]  E Ioannides,et al.  An Analytical Formulation for the Life of Rolling Bearings. , 1999 .

[27]  F. J. Martinez-de-Pison,et al.  Combining regression trees and the finite element method to define stress models of highly non-linear mechanical systems , 2009 .

[28]  H. Muro,et al.  Initiation and propagation of surface cracks in rolling fatigue of high hardness steel , 1975 .

[29]  T. Tallián.  An engineering model of spalling fatigue failure in rolling contact: III. Engineering discussion and illustrative examples , 1971 .

[30]  Srečko Glodež,et al.  Load capacity of a three-row roller slewing bearing raceway , 2011 .

[31]  Rubén Lostado-Lorza,et al.  Using the finite element method and data mining techniques as an alternative method to determine the maximum load capacity in tapered roller bearings , 2017, J. Appl. Log..

[32]  H. O. Fuchs,et al.  Metal fatigue in engineering , 2001 .

[33]  Srečko Glodež,et al.  Computational model for determination of static load capacity of three-row roller slewing bearings with arbitrary clearances and predefined raceway deformations , 2013 .

[34]  N. G. Popinceanu,et al.  Critical stresses in rolling contact fatigue , 1981 .