A phantom node formulation with mixed mode cohesive law for splitting in laminates
暂无分享,去创建一个
[1] Ted Belytschko,et al. A finite element method for crack growth without remeshing , 1999 .
[2] Ted Belytschko,et al. Elastic crack growth in finite elements with minimal remeshing , 1999 .
[3] Stephen W. Tsai,et al. A General Theory of Strength for Anisotropic Materials , 1971 .
[4] M. A. Gutiérrez. Energy release control for numerical simulations of failure in quasi‐brittle solids , 2004 .
[5] D. Mollenhauer,et al. Examination of ply cracking in composite laminates with open holes: A moiré interferometric and numerical study , 2006 .
[6] Pedro P. Camanho,et al. Failure Criteria for FRP Laminates , 2005 .
[7] Ted Belytschko,et al. A method for dynamic crack and shear band propagation with phantom nodes , 2006 .
[8] J.-F. Maire,et al. A multiscale progressive failure approach for composite laminates based on thermodynamical viscoelastic and damage models , 2007 .
[9] Pedro P. Camanho,et al. A continuum damage model for composite laminates: Part I - Constitutive model , 2007 .
[10] L. Sluys,et al. Continuum Models for the Analysis of Progressive Failure in Composite Laminates , 2009 .
[11] John H. Crews,et al. The mixed-mode bending method for delamination testing , 1989 .
[12] H. Schürmann,et al. FAILURE ANALYSIS OF FRP LAMINATES BY MEANS OF PHYSICALLY BASED PHENOMENOLOGICAL MODELS , 1998 .
[13] F. Chang,et al. Modelling of splitting and delamination in notched cross-ply laminates , 2000 .
[14] W. Paepegem,et al. Modelling the nonlinear shear stress-strain response of glass fibre- reinforced composites. Part I: Experimental results , 2006 .
[15] John W. Gillespie,et al. On the Analysis and Design of the End Notched Flexure (ENF) Specimen for Mode II Testing , 1986 .
[16] Michael R Wisnom,et al. A concise interface constitutive law for analysis of delamination and splitting in composite materials and its application to scaled notched tensile specimens , 2007 .
[17] Qingda Yang,et al. Cohesive models for damage evolution in laminated composites , 2005 .
[18] Timon Rabczuk,et al. A new crack tip element for the phantom‐node method with arbitrary cohesive cracks , 2008 .
[19] P. Camanho,et al. Numerical Simulation of Mixed-Mode Progressive Delamination in Composite Materials , 2003 .
[20] Michael R Wisnom,et al. An experimental investigation into the tensile strength scaling of notched composites , 2007 .
[21] Lorenzo Iannucci,et al. Physically-based failure models and criteria for laminated fibre-reinforced composites with emphasis on fibre kinking: Part I: Development , 2006 .
[22] J. Oliver. On the discrete constitutive models induced by strong discontinuity kinematics and continuum constitutive equations , 2000 .
[23] Stephen R. Hallett,et al. Numerical Investigation of Progressive Damage and the Effect of Layup in Notched Tensile Tests , 2006 .
[24] P. Hansbo,et al. A finite element method for the simulation of strong and weak discontinuities in solid mechanics , 2004 .
[25] James M. Whitney,et al. A Double Cantilever Beam Test for Characterizing Mode I Delamination of Composite Materials , 1982 .
[26] L. J. Sluys,et al. A new method for modelling cohesive cracks using finite elements , 2001 .
[27] L. J. Sluys,et al. A continuous–discontinuous approach to simulate fracture processes in quasi-brittle materials , 2008 .
[28] P. Steinmann,et al. A finite element method for the computational modelling of cohesive cracks , 2005 .
[29] T. Belytschko,et al. Extended finite element method for cohesive crack growth , 2002 .
[30] Cv Clemens Verhoosel,et al. A dissipation‐based arc‐length method for robust simulation of brittle and ductile failure , 2009 .
[31] M. Wisnom,et al. Size effects in unnotched tensile strength of unidirectional and quasi-isotropic carbon/epoxy composites , 2008 .
[32] Ireneusz Lapczyk,et al. Progressive damage modeling in fiber-reinforced materials , 2007 .
[33] W. Paepegem,et al. Modelling the nonlinear shear stress–strain response of glass fibre-reinforced composites. Part II: Model development and finite element simulations , 2006 .
[34] Robert L. Taylor,et al. A constitutive model for anisotropic damage in fiber-composites , 1995 .
[35] Endel V. Iarve,et al. Mesh independent modelling of cracks by using higher order shape functions , 2003 .
[36] Pedro P. Camanho,et al. A damage model for the simulation of delamination in advanced composites under variable-mode loading , 2006 .
[37] M. Benzeggagh,et al. Measurement of mixed-mode delamination fracture toughness of unidirectional glass/epoxy composites with mixed-mode bending apparatus , 1996 .
[38] C. C. Chamis,et al. Ten-deg off-axis test for shear properties in fiber composites , 1977 .
[39] Z. Hashin. Failure Criteria for Unidirectional Fiber Composites , 1980 .
[40] Jr. J. Crews,et al. Mixed-Mode Bending Method for Delamination Testing , 1990 .
[41] M. F. Kanninen,et al. An augmented double cantilever beam model for studying crack propagation and arrest , 1973, International Journal of Fracture.