Tool path smoothing of a redundant machine: Application to Automated Fiber Placement

Automated Tape Laying and Fiber Placement of composite materials are the two principal automated processes used for fabrication of large composite structures in aeronautical industry. The aluminum parts produced by High Speed Machining tend to be replaced by carbon fiber composite parts realized with these processes. However, structural parts present reinforcement zones which disturb the tool path follow-up and generate an increase of the manufacturing time. Thus, this paper deals with the optimization of tool paths of a 7-axis machine tool of Fiber Placement with the objective of reducing the manufacturing time while ensuring the requested quality of the final part. In this paper, two complementary methods are detailed. The first method takes advantage of the degree of redundancy of the machine tool to decrease the kinematic loads of the control joints. The second method aims to smooth the orientation of the machine head along the tool path while ensuring quality constraints. These two methods are then applied on a test tool path and bring to a significant decrease of the manufacturing time (32.9%).

[1]  Jorge J. Moré,et al.  The Levenberg-Marquardt algo-rithm: Implementation and theory , 1977 .

[2]  Yean-Ren Hwang,et al.  Five-axis tool orientation smoothing using quaternion interpolation algorithm , 2003 .

[3]  Allan D. Spence,et al.  A constant feed and reduced angular acceleration interpolation algorithm for multi-axis machining , 2001, Comput. Aided Des..

[4]  Andreas C. Nearchou,et al.  Solving the inverse kinematics problem of redundant robots operating in complex environments via a modified genetic algorithm , 1998 .

[5]  I. A. Jones,et al.  Improving composite lay-up for non-spherical filament-wound pressure vessels , 1996 .

[6]  Yueqing Yu,et al.  Motion control of flexible robot manipulators via optimizing redundant configurations , 2001 .

[7]  Fredrik Gustafsson,et al.  Determining the initial states in forward-backward filtering , 1996, IEEE Trans. Signal Process..

[8]  Maria da Graça Marcos,et al.  Trajectory planning of redundant manipulators using genetic algorithms , 2009 .

[9]  Andrew A. Goldenberg,et al.  A Solution to the Inverse Kinematics of Redundant Manipulators , 1985, 1985 American Control Conference.

[10]  T. Yoshikawa,et al.  Task-Priority Based Redundancy Control of Robot Manipulators , 1987 .

[11]  Pascal Ray,et al.  The Domain of Admissible Orientation concept: A new method for five-axis tool path optimisation , 2008, Comput. Aided Des..

[12]  Pierre-Yves Pechard,et al.  Geometrical deviations versus smoothness in 5-axis high-speed flank milling , 2009 .

[13]  J. J. Moré,et al.  Levenberg--Marquardt algorithm: implementation and theory , 1977 .

[14]  Yoshihiko Nakamura,et al.  Inverse kinematic solutions with singularity robustness for robot manipulator control , 1986 .

[15]  Rajiv V. Dubey,et al.  Redundant robot control using task based performance measures , 1988, J. Field Robotics.

[16]  Bijan Shirinzadeh,et al.  Trajectory generation for open-contoured structures in robotic fibre placement , 2007 .

[17]  Wisama Khalil,et al.  A new geometric notation for open and closed-loop robots , 1986, Proceedings. 1986 IEEE International Conference on Robotics and Automation.

[18]  Nikos A. Aspragathos,et al.  Application of genetic algorithms to point-to-point motion of redundant manipulators , 1996 .

[19]  Won Jee Chung,et al.  Kinematic control of planar redundant manipulators by extended motion distribution scheme , 1992, Robotica.

[20]  Christophe Tournier,et al.  Optimization of 5-axis high-speed machining using a surface based approach , 2008, Comput. Aided Des..

[21]  Muhammad Arif,et al.  Cartesian path generation of robot manipulators using continuous genetic algorithms , 2002, Robotics Auton. Syst..

[22]  Yuan-Shin Lee,et al.  Optimizing tool orientations for 5-axis machining by configuration-space search method , 2003, Comput. Aided Des..

[23]  Jindong Tan,et al.  A singularity-free motion control algorithm for robot manipulators - a hybrid system approach , 2004, Autom..

[24]  George-Christopher Vosniakos,et al.  Motion coordination for industrial robotic systems with redundant degrees of freedom , 2009 .

[25]  Knut Sørby,et al.  Inverse kinematics of five-axis machines near singular configurations , 2007 .

[26]  Maarouf Saad,et al.  Modeling and adaptive control of redundant robots , 2006, Math. Comput. Simul..

[27]  Pascal Ray,et al.  Corner optimization for pocket machining , 2004 .

[28]  Bijan Shirinzadeh,et al.  Fabrication process of open surfaces by robotic fibre placement , 2004 .

[29]  Pierre Bourdet,et al.  Avoiding 5-axis singularities using tool path deformation , 2004 .

[30]  Jean-Yves Hascoët,et al.  An enhanced machining simulator with tool deflection error analysis , 2002 .