Mussel-inspired modification of a polymer membrane for ultra-high water permeability and oil-in-water emulsion separation

The surface structures and properties of a membrane largely determine its in-service performance during a filtration process. Here we report a facile hydrophilization method via co-deposition of mussel-inspired polydopamine (PDA) and polyethyleneimine (PEI) on a polypropylene microfiltration membrane. The deposition time is greatly shortened and the surface hydrophilicity is significantly improved compared to those membranes decorated only by PDA. The dopamine/PEI deposition solution can be reused several times with negligible effect on the surface hydrophilicity of membranes. Moreover, the PDA/PEI coating endows the membranes with ultra-high water permeability, allowing microfiltration separation of oil-in-water emulsions under atmospheric pressure.

[1]  Haeshin Lee,et al.  Mussel-Inspired Surface Chemistry for Multifunctional Coatings , 2007, Science.

[2]  G. Trägårdh,et al.  Membrane emulsification — a literature review , 2000 .

[3]  Chong Cheng,et al.  The hydrodynamic permeability and surface property of polyethersulfone ultrafiltration membranes with mussel-inspired polydopamine coatings , 2012 .

[4]  Lei Jiang,et al.  Special wettable materials for oil/water separation , 2014 .

[5]  In Taek Song,et al.  Non‐Covalent Self‐Assembly and Covalent Polymerization Co‐Contribute to Polydopamine Formation , 2012 .

[6]  Zhi‐Kang Xu,et al.  Mineral-Coated Polymer Membranes with Superhydrophilicity and Underwater Superoleophobicity for Effective Oil/Water Separation , 2013, Scientific Reports.

[7]  B. Freeman,et al.  Effect of polydopamine deposition conditions on fouling resistance, physical properties, and permeation properties of reverse osmosis membranes in oil/water separation , 2013 .

[8]  D. Selkoe,et al.  Dopamine covalently modifies and functionally inactivates parkin , 2005, Nature Medicine.

[9]  Radosław Mrówczyński,et al.  Structure of polydopamine: a never-ending story? , 2013, Langmuir : the ACS journal of surfaces and colloids.

[10]  Lei Jiang,et al.  Zeolite-coated mesh film for efficient oil–water separation , 2013 .

[11]  Lei Jiang,et al.  Bioinspired Design of a Superoleophobic and Low Adhesive Water/Solid Interface , 2009 .

[12]  Jinhong Jiang,et al.  Antifouling and antimicrobial polymer membranes based on bioinspired polydopamine and strong hydrogen-bonded poly(N-vinyl pyrrolidone). , 2013, ACS applied materials & interfaces.

[13]  Zhi-Kang Xu,et al.  Surface engineering of macroporous polypropylene membranes , 2009 .

[14]  A. Mayes,et al.  ATRP of Amphiphilic Graft Copolymers Based on PVDF and Their Use as Membrane Additives , 2002 .

[15]  B. Freeman,et al.  Elucidating the structure of poly(dopamine). , 2012, Langmuir : the ACS journal of surfaces and colloids.

[16]  B. Freeman,et al.  Influence of polydopamine deposition conditions on pure water flux and foulant adhesion resistance of reverse osmosis, ultrafiltration, and microfiltration membranes , 2010 .

[17]  Lei Jiang,et al.  Superhydrophobic and Superoleophilic PVDF Membranes for Effective Separation of Water‐in‐Oil Emulsions with High Flux , 2013, Advanced materials.

[18]  Zhi‐Kang Xu,et al.  Surface modification of polypropylene microfiltration membranes by graft polymerization of N-vinyl-2-pyrrolidone , 2004 .

[19]  Yang Li,et al.  Surface hydrophilization of microporous polypropylene membrane by grafting zwitterionic polymer for anti-biofouling , 2010 .

[20]  Lei Jiang,et al.  A super-hydrophobic and super-oleophilic coating mesh film for the separation of oil and water. , 2004, Angewandte Chemie.

[21]  Boyang Han,et al.  Stability of polydopamine and poly(DOPA) melanin-like films on the surface of polymer membranes under strongly acidic and alkaline conditions. , 2013, Colloids and surfaces. B, Biointerfaces.

[22]  Jiachun Feng,et al.  Realizing Ultrahigh Modulus and High Strength of Macroscopic Graphene Oxide Papers Through Crosslinking of Mussel‐Inspired Polymers , 2013, Advanced materials.

[23]  Zhi‐Kang Xu,et al.  Surface modification of polypropylene microporous membranes with a novel glycopolymer , 2005 .

[24]  Feng Zhang,et al.  A novel zwitterionic polyelectrolyte grafted PVDF membrane for thoroughly separating oil from water with ultrahigh efficiency , 2013 .

[25]  Zhi‐Kang Xu,et al.  Bio-inspired CaCO3 coating for superhydrophilic hybrid membranes with high water permeability , 2012 .

[26]  Zhi‐Kang Xu,et al.  Polydopamine gradients by oxygen diffusion controlled autoxidation. , 2013, Chemical communications.

[27]  Lei Jiang,et al.  A Novel Superhydrophilic and Underwater Superoleophobic Hydrogel‐Coated Mesh for Oil/Water Separation , 2011, Advanced materials.

[28]  Lei Jiang,et al.  Nacre-inspired design of mechanical stable coating with underwater superoleophobicity. , 2013, ACS nano.

[29]  B. Freeman,et al.  Reactive amphiphilic graft copolymer coatings applied to poly(vinylidene fluoride) ultrafiltration membranes , 2007 .

[30]  Lei Jiang,et al.  Clam's Shell Inspired High‐Energy Inorganic Coatings with Underwater Low Adhesive Superoleophobicity , 2012, Advanced materials.

[31]  Liping Zhu,et al.  A facile method of surface modification for hydrophobic polymer membranes based on the adhesive behavior of poly(DOPA) and poly(dopamine) , 2009 .

[32]  Sung Min Kang,et al.  Mussel- and Diatom-Inspired Silica Coating on Separators Yields Improved Power and Safety in Li-Ion Batteries , 2012 .

[33]  B. Freeman,et al.  A bioinspired fouling-resistant surface modification for water purification membranes , 2012 .