Thermal-hydraulic and neutronic analyses of the submersion-subcritical, safe space (S4) reactor

Abstract The solid-core Submersion-Subcritical Safe Space (S 4 ) reactor is cooled with He-28% Xe gas (molecular weight of 40 g/mole) and nominally generates 471 kWth for at least 7 years. To avoid single point failures in reactor cooling and energy conversion, the S 4 reactor core is divided into three hydraulically independent, but neutronically and thermally coupled sectors. Each sector feeds a separate Closed Brayton Cycle (CBC) power conversion loop with separate heat rejection radiator panels. Detailed thermal-hydraulic analyses of the S 4 reactor core are performed to ensure that the maximum fuel temperature during nominal operation stays below 1300 K. In addition, a neutronics analysis performed using MCNP 5 confirms that the S 4 reactor satisfies the design reactivity requirements. These are at least $ 4 of cold clean excess reactivity, at least $ 2.25 of shutdown margin, and at least $ 1 subcritical in the worst-case of submersion and flooding, following a launch abort accident. Mass estimates of the S 4 reactor design that meets both the thermal and the reactivity requirements are provided.

[1]  Mohamed S. El-Genk,et al.  Low Mass SCoRe‐S Designs for Affordable Planetary Exploration , 2007 .

[2]  P. F. Rose,et al.  ENDF-201: ENDF/B-VI summary documentation , 1991 .

[3]  J. P. Hawley,et al.  Water immersion safety for SNAP reactors , 1967 .

[4]  Mohamed S. El-Genk,et al.  “SAIRS” — Scalable Amtec Integrated Reactor space power System , 2004 .

[5]  Jennifer Liscum‐Powell,et al.  Neutronics Analysis and Design Optimization of the Pellet Bed Reactor for Bimodal Applications , 2008 .

[6]  R.E. MacFarlane,et al.  The NJOY Nu-clear Data Processing System Version 91 , 1994 .

[7]  M. El-Genk,et al.  Submersion criticality safety of fast spectrum space reactors : Potential spectral shift absorbers , 2006 .

[8]  Mohamed S. El-Genk,et al.  Submersion-Subcritical Safe Space (S4) reactor , 2006 .

[9]  Mohamed S. El-Genk,et al.  Temperature and burnup reactivities and operational lifetime for the submersion-subcritical, safe space (S∧4) reactor , 2007 .

[10]  Anastasia M. Gribik,et al.  Prometheus Hot Leg Piping Concept , 2007 .

[11]  Mohamed S. El-Genk,et al.  High-Energy-Utilization, Dual-Mode System Concept for Mars Missions , 2001 .

[12]  Mohamed S. El-Genk,et al.  High Temperature Water Heat Pipes Radiator for a Brayton Space Reactor Power System , 2006 .

[13]  Mohamed S. El-Genk,et al.  Selection of Noble Gas Binary Mixtures for Brayton Space Nuclear Power Systems , 2006 .

[14]  Mohamed S. El-Genk,et al.  A review of refractory metal alloys and mechanically alloyed-oxide dispersion strengthened steels for space nuclear power systems , 2005 .

[15]  David I. Poston.  Nuclear safety calculations for heatpipe power system reactors , 2002 .

[16]  Mohamed S. El-Genk,et al.  SCoRe — Concepts of Liquid Metal Cooled Space Reactors for Avoidance of Single‐Point Failure , 2005 .