论文信息 - First Experimental Results of Load Carrying Capacity for a Planar Cable-Suspended Manipulator

First Experimental Results of Load Carrying Capacity for a Planar Cable-Suspended Manipulator

In this paper a performance analysis is presented for a cable-suspended parallel manipulator. Experimental results from some first tests are presented and discussed to validate the theoretical calculation of load carrying capacity. The load-carrying capacity during a given trajectory is obtained. This computational technique is tested on a typical planar cable suspended manipulator. The experiment is performed to compare the calculated maximum load with the actual carrying payload on the path chosen for the comparison.

Moharam Habibnejad Korayem | Mahdi Bamdad | R. M. Zehtab | M Iranpour

[1] Moharam Habibnejad Korayem,et al. Workspace analysis of cable-suspended robots with elastic cable , 2007, 2007 IEEE International Conference on Robotics and Biomimetics (ROBIO).

[2] Moharam Habibnejad Korayem,et al. Formulation and numerical solution of elastic robot dynamic motion with maximum load carrying capacities , 1994, Robotica.

[3] James S. Albus,et al. The NIST robocrane , 1993, J. Field Robotics.

[4] Bahram Ravani,et al. Dynamic Load Carrying Capacity of Mechanical Manipulators—Part I: Problem Formulation , 1988 .

[5] Sunil K. Agrawal,et al. On the Design of Cable-Suspended Planar Parallel Robots , 2005 .

[6] Moharam Habibnejad Korayem,et al. Maximum Dynamic Load Carrying Capacity of 6UPS-Stewart Platform flexible joint Manipulator , 2006, 2006 IEEE International Conference on Robotics and Biomimetics.