CO sensing with SnO2 thick film sensors: role of oxygen and water vapour

The paper investigates the gas response of nanocrystalline SnO2 based thick film sensors upon exposure to carbon monoxide (CO) in changing water vapour (H2O) and oxygen (O2) backgrounds. The sensing materials were undoped, Pt- and Pd-doped SnO2. We found that in the absence of oxygen, the sensor signal (defined as the ratio between the resistance in the background gas, R0 and the resistance in the presence of the target gases, R, namely R0/R) have the highest values. These values are higher for doped materials than for the undoped ones. The presence of humidity increases dramatically the sensor signal of the doped materials. In the presence of oxygen, the sensor signal decreases significantly for all sensor materials. The results indicate that there is a competitive adsorption between O2 and H2O related surface species and, as a result, different sensing mechanisms can be observed for CO.

[1]  U. Lampe,et al.  Coadsorption and cross sensitivity on high temperature semiconducting metal oxides: water effect on the coadsorption process☆ , 1994 .

[2]  Udo Weimar,et al.  In situ diffuse reflectance infrared spectroscopy study of CO adsorption on SnO2 , 2001 .

[3]  R. Ionescu,et al.  The mechanism of the interaction between CO and an SnO2 surface: the role of water vapour , 1993 .

[4]  N. Yamazoe.  New approaches for improving semiconductor gas sensors , 1991 .

[5]  D. Kohl,et al.  Kinetic studies of the decomposition of CH3COOH and CH3COOD on SnO2 single crystals , 1985 .

[6]  Norio Miura,et al.  New methods for supporting palladium on a tin oxide gas sensor , 1992 .

[7]  Noboru Yamazoe,et al.  Interactions of tin oxide surface with O2, H2O AND H2 , 1979 .

[8]  M. Rumyantseva,et al.  Role of Pt Aggregates in Pt / SnO2 Thin Films Used as Gas Sensors Investigations of the Catalytic Effect , 2000 .

[9]  H. Meixner,et al.  Effect of coadsorption of reducing gases on the conductivity of β-Ga2O3 thin films in the presence of O2 , 1994 .

[10]  P. Harrison,et al.  Tin oxide surfaces. Part 16.—Infrared study of the adsorption of formic acid, acrylic acid and acrolein on tin(IV) oxide, tin(IV) oxide–silica and tin(IV) oxide–palladium oxide , 1985 .

[11]  T. Seiyama,et al.  Chemical sensor technology , 1988 .

[12]  J. Vohs,et al.  Conversion of methanol, formaldehyde and formic acid on the polar faces of zinc oxide , 1986 .

[13]  D. Kohl.  Surface processes in the detection of reducing gases with SnO2-based devices , 1989 .