Computational Study of Combustor–Turbine Interactions

The Open National Combustion Code is applied to the simulation of a realistic combustor configuration (Energy Efficient Engine) in order to investigate the unsteady flowfields inside the combustor ...

[1]  J. Lumley,et al.  A new Reynolds stress algebraic equation model , 1994 .

[2]  Li He,et al.  Effect of hot-streak counts on turbine blade heat load and forcing , 2007 .

[3]  Thomas Povey,et al.  Effect of Temperature Nonuniformity on Heat Transfer in an Unshrouded Transonic HP Turbine: An Experimental and Computational Investigation , 2010 .

[4]  Christopher M. Heath.  Parametric Modeling Investigation for Radially Staged Low-Emission Combustion , 2016 .

[5]  David E. Gray,et al.  Results of NASA's Energy Efficient Engine Program , 1987 .

[6]  G. S. Samuelsen,et al.  Optimization of Jet Mixing into a Rich, Reacting Crossflow , 1998 .

[7]  Meng-Sing Liou,et al.  Enhancing Open National Combustion Code and Application of Energy Efficient Engine Combustor , 2017 .

[8]  Ali Ameri,et al.  Deposition With Hot Streaks in an Uncooled Turbine Vane Passage , 2013 .

[9]  W. Greene,et al.  Energy efficient engine combustor test hardware detailed design report , 1982 .

[10]  Anthony C. Iannetti,et al.  Comparing Spray Characteristics from Reynolds Averaged Navier-Stokes (RANS) National Combustion Code (NCC) Calculations Against Experimental Data for a Turbulent Reacting Flow , 2010 .

[11]  Robert J. Santoro,et al.  An experimental estimation of mean reaction rate and flame structure during combustion instability in a lean premixed gas turbine combustor , 2000 .

[12]  Alan R. Kerstein,et al.  A linear-eddy model of turbulent scalar transport and mixing , 1988 .

[13]  C. Fureby,et al.  Large-eddy simulations of bluff body stabilized flames , 1994 .

[14]  Alan R. Kerstein,et al.  Stochastic simulation of the structure and propagation rate of turbulent premixed flames , 1992 .

[15]  Nan-Suey Liu,et al.  Modeling Jet Engine Aerosols in the Postcombustor Flow Path and Sampling System , 2007 .

[16]  Meng-Sing Liou,et al.  A sequel to AUSM, Part II: AUSM+-up for all speeds , 2006, J. Comput. Phys..

[17]  R. D. Thulin,et al.  Energy efficient engine high-pressure turbine detailed design report , 1982 .

[18]  Florent Duchaine,et al.  Large Eddy Simulations of the Combustor Turbine Interface: Study of the Potential and Clocking Effects , 2016 .

[19]  C. L. Merkle,et al.  The application of preconditioning in viscous flows , 1993 .

[20]  Douglas L. Sondak,et al.  A Survey Of Hot Streak Experiments And Simulations , 1999 .

[21]  Nan-Suey Liu,et al.  Preview of the National Combustion Code , 1997 .

[22]  B. Hjertager,et al.  On mathematical modeling of turbulent combustion with special emphasis on soot formation and combustion , 1977 .

[23]  Stephen B. Pope,et al.  A Monte Carlo Method for the PDF Equations of Turbulent Reactive Flow , 1981 .

[24]  Forrest E. Ames.  The Influence of Large Scale High Intensity Turbulence on Vane Heat Transfer , 1995 .

[25]  Meng-Sing Liou,et al.  Enhancement of the Open National Combustor Code (Open NCC) and Initial Simulation of Energy Efficient Engine , 2016 .

[26]  M. J. Scott,et al.  Premixed turbulent flame instability and NO formation in a lean-burn swirl burner , 1998 .

[27]  T. Poinsot,et al.  A two-step chemical scheme for kerosene–air premixed flames , 2010 .

[28]  T. Poinsot,et al.  Outlet-Boundary-Condition Influence for Large Eddy Simulation of Combustion Instabilities in Gas Turbines , 2008 .

[29]  E. Turkel,et al.  Preconditioned methods for solving the incompressible low speed compressible equations , 1987 .

[30]  Zhenping Feng,et al.  Effects of Hot Streak and Airfoil Clocking on Heat Transfer and Aerodynamic Characteristics in Gas Turbine , 2016 .

[31]  Xiaoyu Yang,et al.  Large Eddy Simulation for Turbines: Methodologies, Cost and Future Outlooks , 2014 .

[32]  L. P. Timko.  Energy Efficient Engine high pressure turbine component test performance report , 1984 .

[33]  Kumud Ajmani,et al.  Unsteady-flow computations for the NCC , 2001 .

[34]  Nan-Suey Liu,et al.  Updates to Simulation of a Single-Element Lean-Direct Injection Combustor Using Arbitary Polyhedral Meshes , 2015 .

[35]  Anthony C. Iannetti,et al.  Comparing Spray Characteristics from RANS NCC Calculations Against Experimental Data for a Turbulent Reacting Flow , 2010 .

[36]  Thierry Poinsot,et al.  Large Eddy Simulations of gaseous flames in gas turbine combustion chambers , 2012 .

[37]  Forrest E. Ames,et al.  The influence of large-scale high-intensity turbulence on vane heat transfer , 1997 .