Mechanical Properties of Steel Fiber-Reinforced Concrete

This paper presents the results from an experimental program and an analytical assessment of the influence of addition of fibers on mechanical properties of concrete. Models derived based on the regression analysis of 60 test data for various mechanical properties of steel fiber-reinforced concrete have been presented. The various strength properties studied are cube and cylinder compres- sive strength, split tensile strength, modulus of rupture and postcracking performance, modulus of elasticity, Poisson's ratio, and strain corresponding to peak compressive stress. The variables considered are grade of concrete, namely, normal strength 35 MPa, moderately high strength 65 MPa, and high-strength concrete 85 MPa, and the volume fraction of the fiber Vf=0.0, 0.5, 1.0, and 1.5%. The strength of steel fiber-reinforced concrete predicted using the proposed models have been compared with the test data from the present study and with various other test data reported in the literature. The proposed model predicted the test data quite accurately. The study indicates that the fiber matrix interaction contributes significantly to enhancement of mechanical properties caused by the introduction of fibers, which is at variance with both existing models and formulations based on the law of mixtures. 85 MPa with various fiber dosages Vf=0, 0.5, 1.0, and 1.5%. An empirical relationship for various mechanical properties of SFRC has been proposed. The proposed model attempts to bring out the significance of fiber matrix interaction in all the strength properties. This study reports the experimental results of the strength properties of SFRC, namely, cube and cylinder compressive strength, split tensile strength, modulus of rupture, modulus of elasticity, Poisson's ratio, and strain corresponding to peak com- pressive stress. Empirical relationships were developed for vari- ous strength properties based on the regression analysis of the 60 test data. It is expected that these proposed models would be helpful in assessing the strength properties of fiber-reinforced concrete based on the matrix strength and fiber-RI.